Finish Selecting Your Vehicle

Choose your Engine for your 1999 Audi A4 Quattro

  • 4 Cyl 1.8L
  • 6 Cyl 2.8L

Shop By Brand

The Following brands are available based on your search.

  • Atlantic Automotive Eng.
    Atlantic Automotive Eng.
  • Atlantic Automotive Enterprise
    Atlantic Automotive Enterprise
  • BBB Industries
    BBB Industries
  • Bosch
    Bosch
  • Cardone
    Cardone
  • Flaming River
    Flaming River
  • Ford Racing
    Ford Racing
  • Mapco
    Mapco
  • Maval
    Maval
  • PWR
    PWR
  • TRW
    TRW

Showing Products For 1999 Audi A4 Quattro Rack and Pinion Assembly

Below are all the different brands and applications for 1999 Audi A4 Quattro Rack and Pinion Assembly

Showing 1 - 10 of 32 Products for Rack and Pinion Assembly.

Refine Your Search

Atlantic Automotive Eng.
1999 Audi A4 Quattro Rack and Pinion Assembly 6 Cyl 2.8L Atlantic Automotive Eng. - w/o Outer Tie Rod Ends

P311-54952E9    W0133-1736255  New

Qty:
In Stock & Ready to Ship
$780.19
Atlantic Automotive Eng. Rack and Pinion Assembly
  • 100% New Complete Long Rack
  • Chas: 303810-
  • w/o Outer Tie Rod Ends
Brand: Atlantic Automotive Eng.
Additional Fitment Information:
Vehicle Block Engine CID CC Chassis Range
1999 - Audi A4 Quattro V 6 Cyl 2.8L - 2771 303810 and up
Cardone
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Cardone - Rack and Pinion Assembly

P311-2766647    26-9006  Remanufactured

3B1422052D , 3B1422052F , 3B1422052H , 3B1422052L , 3B1422052MX , 3B1422052R , 3B1422052S , 4B0419801B , 4B0419801E , 4B0419801M , 4D0419801B , 4D0419801E , 4D0419801Q , 8D1422052K , 8D1422052KX , 8D1422052L , 8D1422052LX , 8D1422052M , 8D1422052MX , 8D1422053A , 8D1422053AV , 8D1422053AX , 8D1422053BV , 8D1422053BX , 8D1422065J , 8D1422071M , 8D1422071P , 8D1422072A

Qty:
In Stock & Ready to Ship
$106.20 $252.48
Cardone Rack and Pinion Assembly
  • Except Koyo Gear Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 20.125
    • Distance Between Mounting Holes (mm): 511.17
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: Banjo/washer
    • Input Shaft Diameter (in): 0.746
    • Input Shaft Diameter (mm): 18.94
    • Input Shaft Length (in): 1.50
    • Input Shaft Length (mm): 38.10
    • Package Contents: Rack And Pinion, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 40.13
    • Rack Length (mm): 1019.17
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 51.43
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781
Cardone
1999 Audi A4 Quattro Rack and Pinion Assembly 6 Cyl 2.8L Cardone - Rack and Pinion Assembly

P311-2766647    26-9006  Remanufactured

Qty:
In Stock & Ready to Ship
$106.20 $252.48
Cardone Rack and Pinion Assembly
  • From Chassis # 8D-X-302334 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 20.125
    • Distance Between Mounting Holes (mm): 511.17
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: Banjo/washer
    • Input Shaft Diameter (in): 0.746
    • Input Shaft Diameter (mm): 18.94
    • Input Shaft Length (in): 1.50
    • Input Shaft Length (mm): 38.10
    • Package Contents: Rack And Pinion, Instruction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 40.13
    • Rack Length (mm): 1019.17
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 51.43
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro V 6 Cyl 2.8L - 2771
Bosch
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Bosch - w/o Outer Tie Rod Ends

P311-1AF1116    W0133-1735215  New

Qty:
In Stock & Ready to Ship
$162.00 $1,023.86
Bosch Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Factory Koyo Unit
  • w/o Outer Tie Rod Ends
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781
Bosch
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Bosch - w/o Outer Tie Rod Ends

P311-1AF1116    W0133-1735215  New

Qty:
In Stock & Ready to Ship
$162.00 $1,023.86
Bosch Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Factory ZF Unit
  • w/o Outer Tie Rod Ends
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781
Cardone
1999 Audi A4 Quattro Rack and Pinion Assembly 6 Cyl 2.8L Cardone - Rack and Pinion Assembly

P311-2C4503B    26-2903  Remanufactured

4D0419801B , 8D1422052C , 8D1422052CX , 8D1422069B , 8D1422071C

Qty:
In Stock & Ready to Ship
$108.90 $174.26
Cardone Rack and Pinion Assembly
  • To Chassis # 8D-X-199999 Includes Inner Tie Rods In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Hydraulic Power
  • Rack and Pinion Assembly
  • Product Attributes:
    • Casting Material: Aluminum
    • Distance Between Mounting Holes (in): 20.13
    • Distance Between Mounting Holes (mm): 511.18
    • E-Waste: No
    • FAQs:
      • For The First Few Minutes Of Driving My Car, The Steering Is Hard. Is The Rack And Pinion Bad Or The Power Steering Pump?
      • I Replaced The Rack And Now The Power Steering Pump Is Whining. What Happened? It Never Did This Before!
      • Steering Not Returning To Center Coming Out Of A Turn. What Could Be Causing This?
      • The Most Likely Cause Of Power Steering Pump Whine Is Air In The System. The Steering System Must Be Bled Completely.
      • The Rack And Pinion Does Not Return To Center By Itself. The Geometry Of The Front Suspension Causes The Wheels To Return To Center Coming Out Of A Turn. If The Vehicle Will Not Return To Center, First, Check The Front End Alignment, Then, Check For A Res
      • This Symptom Is Classified As "morning Sickness". This Condition Is Caused By Teflon Sealing Rings On The Spool Valve Wearing Grooves In The Aluminum Housing Of The Rack And Pinion Resulting In An Internal Bypass Of Pressure. Once The Housing Warms Up, Th
    • Features and Benefits:
      • 100% Replacement Of Rubber Sealing Components.
      • All New Spool Valve Seals And Rack Donut Seals Are Installed To Eliminate Internal Leaks And Ensure Reliable Performance (where Applicable).
      • Application Of Specialized Lubricant(s) For Extended Life.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Undergoes A Factory Test Drive, Simulating Extreme Operating Conditions While Verifying All On-car Communications.
      • Finished In Protective Coating To Prevent Corrosion And Rust.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Valve Housings Have Polished Micro-finish Sleeves For Durability (where Applicable).
    • Hose Port Type: Banjo/washer
    • Input Shaft Diameter (in): 0.75
    • Input Shaft Diameter (mm): 18.95
    • Input Shaft Length (in): 1.31
    • Input Shaft Length (mm): 33.35
    • Package Contents: Rack And Pinion, Evo Kit, Instuction Sheet
    • Pressure Port Thread Size: M14 X 1.5
    • Product Condition: Remanufactured
    • Rack Length (in): 40.25
    • Rack Length (mm): 1022.35
    • Return Port Thread Size: M16 X 1.5
    • Steering Rack Color: Black
    • Thread Length (mm): 51.44
    • Tie Rod Ends Included: Yes
  • Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro V 6 Cyl 2.8L - 2771
Mapco
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Mapco

P311-076E30C    9306M  New

26-1825 , 3985 , 8D1-422-052B

Qty:
In Stock & Ready to Ship
$150.00 $230.59
  • RACK AND PINION COMPLETE UNIT
  • (w/ZF Design)
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781
Mapco
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Mapco

P311-5BC3458    9329M  New

26-9006 , 3986 , 3B1-422-071N

Qty:
In Stock & Ready to Ship
$150.00 $333.55
  • RACK AND PINION COMPLETE UNIT
  • (w/Koyo Design)
Brand: Mapco
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781
Maval
1999 Audi A4 Quattro Rack and Pinion Assembly 6 Cyl 2.8L Maval - w/o Outer Tie Rod Ends

P311-3172DB5    W0133-1789536  New

Qty:
In Stock & Ready to Ship
$170.00 $521.37
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • Chas: -303809
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Block Engine CID CC Chassis Range
1999 - Audi A4 Quattro V 6 Cyl 2.8L - 2771 up to 303809
Maval
1999 Audi A4 Quattro Rack and Pinion Assembly 4 Cyl 1.8L Maval - w/o Outer Tie Rod Ends

P311-2AC43B9    W0133-1735218  New

Qty:
In Stock & Ready to Ship
$170.00 $593.59
Maval Rack and Pinion Assembly
  • Reman Complete Long Rack
  • with Factory Koyo Unit
  • w/o Outer Tie Rod Ends
Brand: Maval
Additional Fitment Information:
Vehicle Block Engine CID CC
1999 - Audi A4 Quattro L 4 Cyl 1.8L - 1781

Showing 1 - 10 of 32 Products for Rack and Pinion Assembly.