Finish Selecting Your Vehicle

Choose your Submodel for your 1998 Subaru Legacy

  • Brighton
  • GT
  • GT Limited
  • L
  • Outback
  • Postal

Shop By Brand

The Following brands are available based on your search.

  • Autopart International
    Autopart International
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Raybestos
    Raybestos

Showing Products For 1998 Subaru Legacy Disc Brake Caliper

Below are all the different brands and applications for 1998 Subaru Legacy Disc Brake Caliper

Showing 1 - 10 of 63 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1998 Subaru Legacy Disc Brake Caliper - Front Right 4 Cyl 2.5L Cardone - Unloaded Caliper w/Bracket

P311-42D2618    19-B1948  Remanufactured

26291AC020 , 26291AC021

Qty:
In Stock & Ready to Ship
$26.10 $50.86
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 42.7482
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1998 - Subaru Legacy Front Right H 4 Cyl 2.5L - 2458
Cardone
1998 Subaru Legacy Disc Brake Caliper - Front Left 4 Cyl 2.5L Cardone - Unloaded Caliper w/Bracket

P311-08105F3    19-B1949  Remanufactured

26291AC030 , 26291AC031

Qty:
In Stock & Ready to Ship
$26.10 $50.86
Cardone Disc Brake Caliper  Front Left
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 42.7482
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1998 - Subaru Legacy Front Left H 4 Cyl 2.5L - 2458
Cardone
1998 Subaru Legacy Disc Brake Caliper - Rear Left Cardone - Unloaded Caliper w/Bracket

P311-34FDABB    19-B1341  Remanufactured

26220AA091 , 26220PA070 , 26291AA090

Qty:
In Stock & Ready to Ship
$7.20 $37.75
Cardone Disc Brake Caliper  Rear Left
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 37.973
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Left
Additional Fitment Information:
Vehicle Body Position
1998 - Subaru Legacy Wagon Rear Left
Cardone
1998 Subaru Legacy Disc Brake Caliper - Rear Right Cardone - Unloaded Caliper w/Bracket

P311-5BF3AE4    19-B1340  Remanufactured

26220AA081 , 26220PA060 , 26291AA080

Qty:
In Stock & Ready to Ship
$7.20 $37.75
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 37.973
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Body Position
1998 - Subaru Legacy Wagon Rear Right
Cardone
1998 Subaru Legacy Disc Brake Caliper - Front Left 4 Cyl 2.5L Cardone - Unloaded Caliper

P311-117A521    19-1949  Remanufactured

26291AC030 , 26291AC031 , 26291AC051 , 26292AE030

Qty:
In Stock & Ready to Ship
$26.10 $54.62
Cardone Disc Brake Caliper  Front Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 42.7482
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1998 - Subaru Legacy Front Left H 4 Cyl 2.5L - 2458
Cardone
1998 Subaru Legacy Disc Brake Caliper - Front Right 4 Cyl 2.5L Cardone - Unloaded Caliper

P311-5116A8B    19-1948  Remanufactured

26291AC020 , 26291AC021 , 26291AC041 , 26292AE020

Qty:
In Stock & Ready to Ship
$26.10 $54.62
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M7x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturerā€™s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Quantity: 2
    • Piston Size (OD) (mm): 42.7482
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1998 - Subaru Legacy Front Right H 4 Cyl 2.5L - 2458
Centric
1998 Subaru Legacy Disc Brake Caliper - Rear Right Centric - Centric Premium Posi-Quiet Loaded Disc Brake Calipers

P311-1C51440    142.47505  Remanufactured

Qty:
In Stock & Ready to Ship
$25.00 $51.30
Centric Disc Brake Caliper  Rear Right
  • Posi Quiet Loaded Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish.
  • Centric Premium Posi-Quiet Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Bleeder Thread Diameter: 10.000
    • Friction Materials Standards Institute Pad Number: 10x.04710
    • Grade Type: Regular
    • Inlet Thread Diameter: 10.000
    • Pads Included: Yes
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; CentricĀ® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Body Rear Brake Position
1998 - Subaru Legacy Wagon Disc Rear Right
Centric
1998 Subaru Legacy Disc Brake Caliper - Rear Right Centric - Centric Posi-Quiet Loaded Disc Brake Calipers

P311-1C51440    142.47505  Remanufactured

Qty:
In Stock & Ready to Ship
$25.00 $51.30
Centric Disc Brake Caliper  Rear Right
  • Posi Quiet Loaded Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish.
  • Centric Posi-Quiet Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Bleeder Thread Diameter: 10.000
    • Friction Materials Standards Institute Pad Number: 10x.04710
    • Grade Type: Regular
    • Inlet Thread Diameter: 10.000
    • Pads Included: Yes
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; CentricĀ® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Body Rear Brake Position
1998 - Subaru Legacy Wagon Disc Rear Right
Centric
1998 Subaru Legacy Disc Brake Caliper - Rear Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-2FFC4A5    141.47506  Remanufactured

Qty:
In Stock & Ready to Ship
$25.00 $40.60
Centric Disc Brake Caliper  Rear Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.04710
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; CentricĀ® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Left
Additional Fitment Information:
Vehicle Body Rear Brake Position
1998 - Subaru Legacy Wagon Disc Rear Left
Centric
1998 Subaru Legacy Disc Brake Caliper - Rear Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-2FC7824    141.47505  Remanufactured

Qty:
In Stock & Ready to Ship
$25.00 $40.60
Centric Disc Brake Caliper  Rear Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.04710
    • Grade Type: Regular
    • Inlet Fitting Type: Open
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 38.000
    • Piston 2 Diameter: 38.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; CentricĀ® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Rear Right
Additional Fitment Information:
Vehicle Body Rear Brake Position
1998 - Subaru Legacy Wagon Disc Rear Right

Showing 1 - 10 of 63 Products for Disc Brake Caliper.