Finish Selecting Your Vehicle

Choose your Engine for your 1998 Mitsubishi Galant

Shop By Brand

The Following brands are available based on your search.

Showing Products For 1998 Mitsubishi Galant Disc Brake Caliper

Below are all the different brands and applications for 1998 Mitsubishi Galant Disc Brake Caliper

Showing 21 - 30 of 35 Products for Disc Brake Caliper.

Rows Per Page

Sort By

1998 Mitsubishi Galant Disc Brake Caliper - Front Right 4 Cyl 2.4L BBB Industries - TechShield 360 (tm)

Part # P311-4EE76AF Manu # 99P01212B Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $20.00 Best Price: $40.34

Supplied with Mounting Bracket To 01/98
TechShield 360 (tm)
Product Attributes:
- Anti-Squeal Shims Included: No
- Bleeder Screw Cap Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Size: M7-1.0 X 32
- Bleeder Screw Thread (mm): M7-1.0
- Bleeder Thread Size: M7-1.0
- Bracket Included: Yes
- Bracket Mounting Bolts Included: No
- Caliper And Pad Hardware Included: No
- Caliper Color: Gray
- Caliper Finish: Techshield 360 Coated
- Caliper Slides Included: Yes
- Casting Material: Cast Iron
- Dust Boots Included: Yes
- Housing Cast Numbers: 6006, 6012
- Inlet Fitting Type: Banjo Bolt
- Inlet Port Thread Size (mm): M10-1.0 X 23.4
- Inlet Thread Size: M10-1.0
- Pads Included: No
- Piston 1 Diameter (mm): 60
- Piston Material: Steel
- Piston Outside Diameter (in): 2
- Piston Outside Diameter (mm): 60
- Wear Sensors Included: No

Brand: BBB Industries

Position: Front Right

Vehicle	Position	Block	Engine	CID	CC
1998 - Mitsubishi Galant	Front Right	L	4 Cyl 2.4L	-	2351

1998 Mitsubishi Galant Disc Brake Caliper - Rear Left BBB Industries - TechShield 360 (tm)

Part # P311-4FFE4AE Manu # 99P01217A Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $25.00 Best Price: $48.63

Supplied with Mounting Bracket
TechShield 360 (tm)
Product Attributes:
- Anti-Squeal Shims Included: No
- Bleeder Screw Cap Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Size: M7-1.0 X 32
- Bleeder Screw Thread (mm): M7-1.0
- Bleeder Thread Size: M7-1.0
- Bracket Included: Yes
- Bracket Mounting Bolts Included: No
- Caliper And Pad Hardware Included: No
- Caliper Color: Gray
- Caliper Finish: Techshield 360 Coated
- Caliper Slides Included: Yes
- Casting Material: Cast Iron
- Dust Boots Included: Yes
- Housing Cast Numbers: 3506, Or, 3505
- Inlet Fitting Type: Tube Seat
- Inlet Port Thread Size (mm): M10-1.0
- Inlet Thread Size: M10-1.0
- Pads Included: No
- Piston 1 Diameter (mm): 35
- Piston Material: Steel
- Piston Outside Diameter (mm): 35
- Wear Sensors Included: No

Brand: BBB Industries

Position: Rear Left

Vehicle	Position
1998 - Mitsubishi Galant	Rear Left

1998 Mitsubishi Galant Disc Brake Caliper - Front Left 4 Cyl 2.4L BBB Industries - Reman Caliper with Installation Hardware

Part # P311-0750E21 Manu # 99-01212A Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $20.00 Best Price: $36.30

Supplied with Mounting Bracket To 01/98
Reman Caliper with Installation Hardware
Product Attributes:
- Anti-Squeal Shims Included: No
- Bleeder Screw Cap Included: No
- Bleeder Screw Included: Yes
- Bleeder Screw Size: M7-1.0 X 32
- Bleeder Screw Thread (mm): M7-1.0
- Bleeder Thread Size: M7-1.0
- Bracket Included: Yes
- Bracket Mounting Bolts Included: No
- Caliper And Pad Hardware Included: No
- Caliper Color: Gray
- Caliper Finish: Rust Preventative
- Caliper Slides Included: Yes
- Casting Material: Cast Iron
- Dust Boots Included: Yes
- Housing Cast Numbers: 6006, 6012
- Inlet Fitting Type: Banjo Bolt
- Inlet Port Thread Size (mm): M10-1.0 X 23.4
- Inlet Thread Size: M10-1.0
- Pads Included: No
- Piston 1 Diameter (mm): 60
- Piston Material: Steel
- Piston Outside Diameter (in): 2
- Piston Outside Diameter (mm): 60
- Wear Sensors Included: No

Brand: BBB Industries

Position: Front Left

Vehicle	Position	Block	Engine	CID	CC
1998 - Mitsubishi Galant	Front Left	L	4 Cyl 2.4L	-	2351

1998 Mitsubishi Galant Disc Brake Caliper - Front Right Cardone - Ultra Caliper

Part # P311-26331E3 Manu # 19-P1695 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: MB928411

Qty:

In Stock & Ready to Ship

Core Price: $4.50 Best Price: $37.16

with Metal Piston Supplied with Mounting Bracket Exclusive Weatherproof Coating Installation Hardware Included
Ultra Caliper
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Powder Coated
- Caliper Color: Silver
- E-Waste: No
- FAQs:
  - A Silicone Grease Is Used On Floating Caliper Mounting Pins.
  - A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
  - As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
  - Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
  - Brakes Squeal All Of The Time. What's Causing The Squeal?
  - Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
  - Car Pulls To One Side During Braking. Why?
  - Could Calipers Be The Cause Of A Low Brake Pedal?
  - Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
  - Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
  - New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
  - Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
  - What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
  - What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
  - A Plastic Cap Plug Protects Every Brake Port Thread To Ensure A Trouble Free Installation.
  - An Exclusive Silver Weather-proof Coating That Stops Rust From Forming, Maintaining A Showroom Appearance.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
  - New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
  - New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
  - New Washers Are Included Where Applicable For A Proper Seal.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
  - Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Product Condition: Remanufactured
CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

Brand: Cardone

Position: Front Right

Vehicle	Drive Type	Position
1998 - Mitsubishi Galant	FWD	Front Right

1998 Mitsubishi Galant Disc Brake Caliper - Rear Left Cardone - Ultra Caliper

Part # P311-1C001D5 Manu # 19-P1692 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: MR129583

Qty:

In Stock & Ready to Ship

Core Price: $25.20 Best Price: $44.82

with Metal Piston Supplied with Mounting Bracket Exclusive Weatherproof Coating Installation Hardware Included
Ultra Caliper
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Powder Coated
- Caliper Color: Silver
- E-Waste: No
- FAQs:
  - A Silicone Grease Is Used On Floating Caliper Mounting Pins.
  - A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
  - As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
  - Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
  - Brakes Squeal All Of The Time. What's Causing The Squeal?
  - Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
  - Car Pulls To One Side During Braking. Why?
  - Could Calipers Be The Cause Of A Low Brake Pedal?
  - Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
  - Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
  - New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
  - Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
  - What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
  - What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
  - A Plastic Cap Plug Protects Every Brake Port Thread To Ensure A Trouble Free Installation.
  - An Exclusive Silver Weather-proof Coating That Stops Rust From Forming, Maintaining A Showroom Appearance.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
  - New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
  - New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
  - New Washers Are Included Where Applicable For A Proper Seal.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
  - Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Product Condition: Remanufactured
CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

Brand: Cardone

Position: Rear Left

Vehicle	Position
1998 - Mitsubishi Galant	Rear Left

1998 Mitsubishi Galant Disc Brake Caliper - Rear Right Cardone - Ultra Caliper

Part # P311-20EFBF4 Manu # 19-P1693 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: MR129584

Qty:

In Stock & Ready to Ship

Core Price: $25.20 Best Price: $44.82

with Metal Piston Supplied with Mounting Bracket Exclusive Weatherproof Coating Installation Hardware Included
Ultra Caliper
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Powder Coated
- Caliper Color: Silver
- E-Waste: No
- FAQs:
  - A Silicone Grease Is Used On Floating Caliper Mounting Pins.
  - A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
  - As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
  - Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
  - Brakes Squeal All Of The Time. What's Causing The Squeal?
  - Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
  - Car Pulls To One Side During Braking. Why?
  - Could Calipers Be The Cause Of A Low Brake Pedal?
  - Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
  - Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
  - New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
  - Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
  - What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
  - What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
  - A Plastic Cap Plug Protects Every Brake Port Thread To Ensure A Trouble Free Installation.
  - An Exclusive Silver Weather-proof Coating That Stops Rust From Forming, Maintaining A Showroom Appearance.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
  - New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
  - New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
  - New Washers Are Included Where Applicable For A Proper Seal.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
  - Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Bracket; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Product Condition: Remanufactured
CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

Brand: Cardone

Position: Rear Right

Vehicle	Position
1998 - Mitsubishi Galant	Rear Right

1998 Mitsubishi Galant Disc Brake Caliper - Rear Left Cardone - Unloaded Caliper

Part # P311-3BDB143 Manu # 19-1692 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: MB950195 , MR129583

Qty:

In Stock & Ready to Ship

Core Price: $25.20 Best Price: $49.45

with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
Unloaded Caliper
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Oil Emulsion
- Caliper Color: Gray
- E-Waste: No
- FAQs:
  - A Silicone Grease Is Used On Floating Caliper Mounting Pins.
  - A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
  - As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
  - Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
  - Brakes Squeal All Of The Time. What's Causing The Squeal?
  - Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
  - Car Pulls To One Side During Braking. Why?
  - Could Calipers Be The Cause Of A Low Brake Pedal?
  - Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
  - Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
  - New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
  - Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
  - What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
  - What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
  - A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
  - Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
  - New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
  - New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
  - New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
  - New Washers Are Included Where Applicable For A Proper Seal.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
  - Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 34.798
- Product Condition: Remanufactured
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Brand: Cardone

Position: Rear Left

Vehicle	Position
1998 - Mitsubishi Galant	Rear Left

1998 Mitsubishi Galant Disc Brake Caliper - Front Left Cardone - Unloaded Caliper w/Color Coating

Part # P311-14280B9 Manu # 19-1694XR Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: MB928410 , MR449855

Qty:

In Stock & Ready to Ship

Core Price: $4.50 Best Price: $59.06

with Metal Piston Powder Coated Red Installation Hardware Included
Unloaded Caliper w/Color Coating
Product Attributes:
- Bleeder Port Size: M7x1.0
- Brake Caliper Finish: Powder Coated
- Caliper Color: Red
- E-Waste: No
- FAQs:
  - A Silicone Grease Is Used On Floating Caliper Mounting Pins.
  - A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
  - As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
  - Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
  - Brakes Squeal All Of The Time. What's Causing The Squeal?
  - Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
  - Car Pulls To One Side During Braking. Why?
  - Could Calipers Be The Cause Of A Low Brake Pedal?
  - Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
  - Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
  - New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
  - Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
  - What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
  - What Type Of Grease Is Used On Floating Caliper Mounting Pins?
- Features and Benefits:
  - A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
  - Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
  - New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
  - New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
  - New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
  - New Washers Are Included Where Applicable For A Proper Seal.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
  - Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
- Inlet Port Size: M10x1.0
- Installation Hardware Included: Yes
- Mounting Bolts Included: No
- Package Contents: Caliper; Hardware Kit
- Pads Included: No
- Piston Material: Steel
- Piston Size (OD) (mm): 60.198
- Product Condition: Remanufactured
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Brand: Cardone

Position: Front Left

Vehicle	Position
1998 - Mitsubishi Galant	Front Left

1998 Mitsubishi Galant Disc Brake Caliper - Front Left Cardone - Unloaded w/o Bracket

Part # P311-04FE1CC Manu # W0133-1622176 Condition: New

Qty:

In Stock & Ready to Ship

Core Price: $47.00 Best Price: $88.64

Cardone Disc Brake Caliper Front Left

Cardone Disc Brake Caliper Front Left

Cardone/OEF3 Reman
Production: -01/1998
Friction Ready - with Installation Hardware w/o Bracket
Unloaded w/o Bracket
Front - Left

Brand: Cardone

Position: Front Left

Vehicle	Position	Prod. Date Range
1998 - Mitsubishi Galant	Front Left	To:01-00-98

Disc Brake Caliper Mando

Part # P311-4ACCC08 Manu # 16A5276 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $84.53

New OE Disc Brake Caliper, Direct Replacement
Disc Brake Caliper failures are not as common compared to brake pads replacements, but undoubtedly normal/heavy usage over time will cause wear and eventually failure. Failures may include brake fluid leakages or simply lockage of your brake pads – both are major safety concerns. Mando brand new OE brake calipers are same brake calipers as the original ones found on your vehicle. Mando calipers come factory coated as specified by Hyundai and Kia, which is especially important in the snowy-wet regions of the world. Don’t settle for just any value line brake caliper, replace proudly with Mando - We Are OE!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Mando

Vehicle

Showing 21 - 30 of 35 Products for Disc Brake Caliper.

Rows Per Page

Sort By