Shop By Brand

The Following brands are available based on your search.

  • Design Engineering
    Design Engineering
  • Heatshield Products
    Heatshield Products
  • Thermo-Tec
    Thermo-Tec

Showing Products For 1998 Chrysler Sebring Battery Heat Shield

Below are all the different brands and applications for 1998 Chrysler Sebring Battery Heat Shield

Showing 1 - 9 of 9 Products for Battery Heat Shield.

Refine Your Search

Thermo-Tec
Battery Heat Shield Thermo-Tec

P311-13830BF    13200  New

Qty:
In Stock & Ready to Ship
$40.11
Thermo-Tec Battery Heat Shield
  • Battery Wrap Heat Barrier™
  • Battery Wrap Heat Barrier™; 8 in x 40 in.;
  • Features:
    • Designed To Provide Ultimate Protection
    • Black Felt Material Neutralizes Acid
  • The Worlds only acid-neutralizing heat barrier mat. It reflects over 90-percent of radiant heat, traps and neutralizes battery acid, protects against corrosion, is recyclable, protects the environment, and is inexpensive and easy to install.The Battery Heat Barrier Kit is completely safe to handle before and during installation. It is used by all branches of the United States military. The Battery Heat Barrier Kit is also available in rolls or mats.Excessive heat can be as destructive as extreme cold.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-3CB56D8    502008  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 34-pc1500t,sc500-34,3478pc1500dt,b6034,34agma
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Optima 35
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-42065F3    502011  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 9003-151,9040-218,9002-002,9004-003
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Optima 34/78
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-0512F71    502012  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 9003-151,9040-218,9002-002,9004-003
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Group 24f
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-3F20660    502010  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 34-pc1500t,sc500-34,3478pc1500dt,b6034,34agma
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Group 34/78
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-5887578    502014  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 65-pc1750t,bu9065,ft930-65,xv6500,pwr-s6-6500
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Group 65
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-41D7792    502013  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 9003-151,9040-218,9002-002,9004-003
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Group 27f
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Heatshield Products
Battery Heat Shield Heatshield Products

P311-1C3BCDE    502015  New

Qty:
In Stock & Ready to Ship
$136.46
Heatshield Products Battery Heat Shield
  • Lava Battery Shield protects batteries from excessive heat increasing its life
  • Lava Battery Shield protects batteries from excessive heat prolonging the life of the battery. Made from lava rock fiber these heat shields are naturally chemical and acid resistant making them well suited for harsh environments.
  • Product Attributes:
    • Add On: 9003-151,9040-218,9002-002,9004-003
    • Install Tips: Hook And Loop Fasteners
    • Instructions Included: No
    • Insulation Type: Radiant Heat Barrier, Requires 1 Inch Of Airspace. Not Designed For Direct Contact.
    • Operating Temperature: 1200f
    • Peak Temperature: 2000f
    • Product Dimensions: Group 94r
    • Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
  • Features:
    • Shields radiant heat from battery
    • Lava rock fiber is naturally acid resistant
    • Can increase battery life
    • Easy to install
  • Lava Battery Shield from Heatshield Products was born to make your batter better! The lava rock construction is naturally chemical and acid resistant so it can be safely used on lead acid batteries. All batteries including gel, AGM, lithium, and others can prematurely fail or suffer performance loss when overheated. Using this heat shield can extend your battery's life and improve its performance. These heat shields offer superior thermal protection to factory insulation. These high-quality heat shields are superior to the fiberglass based reflective models because if the superiority of the crushed volcanic rock fiber in harsh conditions. The Lava Battery Shield is custom fit to your battery group size, so installation is a snap.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Heatshield Products
Additional Fitment Information:
Vehicle
Design Engineering
Battery Heat Shield Design Engineering

P311-43BA642    10480  New

Qty:
In Stock & Ready to Ship
$42.55
Design Engineering Battery Heat Shield
  • Cell Saver™ Battery Insulation Kit
  • Cell Saver™ Battery Insulation Kit; Includes 40 in. Long x 7 in. Insulation Material/12 in. x 7 in. Treated Base Mat And Edge Sealing Tape;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
  • Features:
    • Protects Batteries From Harmful Radiant Heat
    • Material Withstands Up To 2000 Degrees F Radiant Heat
    • Traps And Neutralizes Harmful Battery Acid
    • Protects Environment And Your Vehicle
    • Completely Safe To Handle Before And During Installation
    • Provides Clean Finished Look With Easy Installation
    • Includes 40 in. X 7 in. Insulation 12 in. X 7 in Treated Base/ Edge Seal
  • Cell Saver(TM) solves the problem of heat soak into batteries, absorbs leaking acids and prevents premature failure due to heat. Batteries are very susceptible to heat and vibration that could cause premature failure and hazardous leaks. Cell Saver(TM) is very capable of damping vibration and will absorb and neutralize any damaging leaky battery acids. Cell Saver(TM) is easy to install and excess material can be trimmed to accommodate batteries of most sizes and shapes. Protects batteries from harmful radiant heat Material withstands up to 2000°F radiant heat Traps & neutralizes harmful battery acid Protects environment and your vehicle Completely safe to handle before and during installation Clean finished look with easy installation Kit Includes: 40 in. L x 7 in. W insulation material 12 in. x 7 in. treated base mat

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Design Engineering
Additional Fitment Information:
Vehicle

Showing 1 - 9 of 9 Products for Battery Heat Shield.