1998 Audi A6 Quattro Coil Spring - Front Lesjofors
P311-3421DB2W0133-1736304New
Qty:
In Stock & Ready to Ship
$99.28
1 Green & 1 Brown Marks
Front
Brand: Lesjofors
Position: Front
Additional Fitment Information:
Vehicle
Position
1998 - Audi A6 Quattro
Front
1998 Audi A6 Quattro Coil Spring - Rear Lesjofors
P311-56F891342 950 48New
Qty:
In Stock & Ready to Ship
$52.97
Rear
with Comfort Suspension
Suggested Purchase Quantity: 2
Most jobs typically require 2 of this item.
Brand: Lesjofors
Position: Rear
Additional Fitment Information:
Vehicle
Engine Designation
Valves
Cylinder Head Type
Position
1998 - Audi A6 Quattro
AHA
30
DOHC
Rear
1998 Audi A6 Quattro Coil Spring - Front Lesjofors
P311-56FBA8240 042 55New
Qty:
In Stock & Ready to Ship
$51.87
From 1/98
Replace in Pairs ONLY
VIN 4B.W.100 001
Suggested Purchase Quantity: 2
Most jobs typically require 2 of this item.
Brand: Lesjofors
Position: Front
Additional Fitment Information:
Vehicle
Engine Designation
Valves
Cylinder Head Type
Position
1998 - Audi A6 Quattro
AHA
30
DOHC
Front
1998 Audi A6 Quattro Coil Spring - Front Lesjofors
P311-389D4B440 042 37New
Qty:
In Stock & Ready to Ship
$53.72
Thru 1/98
VIN 4B.W.100 000
Lesjöfors coil springs are certified to meet or exceed OE quality. They are manufactured using high strength steel, heat treated, shot peened, zinc phosphate coated, epoxy powder coat painted, pre-set, and tested. Lesjöfors springs are the market leading replacement coil springs in Europe and they have been chosen as the OE springs on a variety of the world's fastest production cars. Lesjöfors was founded in 1675 and began making springs in 1852.
Brand: Lesjofors
Position: Front
Additional Fitment Information:
Vehicle
Engine Designation
Valves
Cylinder Head Type
Position
1998 - Audi A6 Quattro
AHA
30
DOHC
Front
Coil Spring Qa1
P311-3099C5012HT095New
Qty:
In Stock & Ready to Ship
$91.99
Spring, Cr-Si High Travel 2-1/2" Id 12" X 95 Lbs/In. Silver Pwdr Coat
High travel coil spring with a 95 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1/2" inner diameter and a 12" length.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
Title:Qa1 Coil Spring 12ht095
Available in 7", 9", 10", 12", 14" and 16" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Coil Spring Qa1
P311-489650712HT095BNew
Qty:
In Stock & Ready to Ship
$93.20
Spring, Cr-Si High Travel 2-1/2" Id, 12" X 95 Lbs/In. Black Pwdr Coat
High travel coil spring with a 95 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1/2" inner diameter and a 12" length.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
Title:Qa1 Coil Spring 12ht095b
QA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Coil Spring Qa1
P311-406D20C12HT110New
Qty:
In Stock & Ready to Ship
$91.99
Spring, Cr-Si High Travel 2-1/2" Id 12" X 110 Lbs/In. Silver Pwdr Coat
High travel coil spring with a 110 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1/2" inner diameter and a 12" length.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
Title:Qa1 Coil Spring 12ht110
Available in 7", 9", 10", 12", 14" and 16" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Coil Spring Qa1
P311-56B6CB112HT130New
Qty:
In Stock & Ready to Ship
$93.62
Spring, Cr-Si High Travel 2-1/2" Id 12" X 130 Lbs/In. Silver Pwdr Coat
High travel coil spring with a 130 lb spring rate. Made with chrome silicon and has a silver powder coat finish. 2-1/2" inner diameter and a 12" length.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
Title:Qa1 Coil Spring 12ht130
Available in 7", 9", 10", 12", 14" and 16" lengths, QA1 offers an assortment of high travel springs with a silver powder coated finish. Made in the USA, these 2" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. In addition, this high-grade material, along with careful heat-treating and post-processing, allows for greatly improved fatigue life, and the coil design allows the springs to be compressed to coil-bind without affecting spring rate or free height. These new high travel springs are silver powder coated and ground at both ends for straight, consistent and accurate operations. In addition, all QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions. Chrome Silicon Steel, All QA1 springs are manufactured using the highest quality materials for high strength, consistency and long life. Cold Wound - Heat Treated - Shot Peened, All QA1 springs go through intensive manufacturing processes to ensure consistency, accuracy and durability. Squared Ends, All QA1 springs are ground at both ends to ensure straight, consistent and accurate operation. Lengths and Rates Marked, All QA1 springs are clearly marked with the free length of the spring and spring rate for quick and easy identification. Made in the USA, QA1's high travel springs are proudly made in the USA. LIFETIME GUARANTEE, All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Qa1
Additional Fitment Information:
Vehicle
Coil Spring Qa1
P311-29BFBC112HT130BNew
Qty:
In Stock & Ready to Ship
$93.04
Spring, Cr-Si High Travel 2-1/2" Id, 12" X 130 Lbs/In. Black Pwdr Coat
High travel coil spring with a 130 lb spring rate. Made with chrome silicon and has a black powder coat finish. 2-1/2" inner diameter and a 12" length.
Product Attributes:
California Proposition 65:Warning: Cancer And Reproductive Harm. Www.p65warnings.ca.gov
Title:Qa1 Coil Spring 12ht130b
QA1 offers an assortment of high travel springs with a black powder coated finish. Made in the USA, these 2" I.D. high travel springs are manufactured from specially designed high-tensile, chrome silicon alloy spring wire, which allows them to have fewer coils and a smaller wire diameter. As a result, these springs are lighter and have increased travel due to the larger distance between the coils. These lighter springs reduce unsprung weight and react faster, optimizing suspension performance. QA1's high travel springs are proudly made in the USA. All QA1 springs are lifetime guaranteed to remain within 2% of the original free height and rate under normal operating conditions.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
