1997 Toyota Tacoma Differential Cover Driveline and Axles - Dorman, Proform

1997 Toyota Tacoma Differential Cover - Rear Dorman

Part # P311-470F51C Manu # 926-993 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 4211035530 , 4211035531 , 4211035540 , 4211035541 , 4211035551 , 4211035561 , 4211035570 , 4211035580 , 4211035590 , 4211035600 , 4211035621 , 4211035680 , 4211035681 , 4211035700 , 4211035701 , 4211035710 , 4211035711 , 4211035850 , 4211035860

Qty:

In Stock & Ready to Ship

Best Price: $61.76

Rear Differential Cover
Product Attributes:
- Bolt Quantity: 0
- Carrier Main Cap Support: No
- Color/Finish: Green
- Differential Cover Bolt Count: 0
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Filler Plug Included: Yes
- Package Contents: 1 Differential Cover; 1 Drain Plug
Features:
- Direct replacement - this weld-on differential cover directly replaces a corroded original cover on certain Toyota 4Runner and Tacoma trucks
- Cost-effective repair - rather than buy a new axle, cut off the old cover and weld on this new one
- Greater durability - constructed from heavier-gauge stamped steel than the original cover
- Ready to install - pre-primed in weldable primer for a clean installation
When the thin-gauge steel corrodes on 4Runner and Tacoma truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Brand: Dorman

Position: Rear

Vehicle	Submodel	Drive Type	Position
1997 - Toyota Tacoma	DLX	RWD	Rear

1997 Toyota Tacoma Differential Cover - Rear Dorman

Part # P311-470F51C Manu # 926-993 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $61.76

Rear Differential Cover
w/Electronic Locking Rear Differential
Product Attributes:
- Bolt Quantity: 0
- Carrier Main Cap Support: No
- Color/Finish: Green
- Differential Cover Bolt Count: 0
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Filler Plug Included: Yes
- Package Contents: 1 Differential Cover; 1 Drain Plug
Features:
- Direct replacement - this weld-on differential cover directly replaces a corroded original cover on certain Toyota 4Runner and Tacoma trucks
- Cost-effective repair - rather than buy a new axle, cut off the old cover and weld on this new one
- Greater durability - constructed from heavier-gauge stamped steel than the original cover
- Ready to install - pre-primed in weldable primer for a clean installation
When the thin-gauge steel corrodes on 4Runner and Tacoma truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Brand: Dorman

Position: Rear

Vehicle	Drive Type	Position
1997 - Toyota Tacoma	4WD	Rear

1997 Toyota Tacoma Differential Cover - Rear Dorman

Part # P311-302F0B1 Manu # 926-958 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 4211034120 , 4211034121 , 4211034130 , 4211034132

Qty:

In Stock & Ready to Ship

Best Price: $69.46

Rear Differential Cover
wo/Electronic Locking Rear Differential
Product Attributes:
- Bolt Quantity: 0
- Carrier Main Cap Support: No
- Color/Finish: Green
- Differential Cover Bolt Count: 0
- Differential Cover Bolts/Studs Included: No
- Differential Cover Carrier Main Cap Support: No
- Filler Plug Included: Yes
- Gasket Material: No
- Package Contents: 1 Differential Cover; 1 Drain Plug
Features:
- Direct replacement - this weld-on differential cover directly replaces a corroded original cover on certain Sequoia, Tacoma and Tundra trucks
- Cost-effective repair - rather than buy a new axle, cut off the old cover and weld on this new one
- Greater durability - constructed from heavier-gauge stamped steel than the original cover
- Ready to install - pre-primed in weldable primer for a clean installation
When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Brand: Dorman

Position: Rear

Vehicle	Drive Type	Position
1997 - Toyota Tacoma	4WD	Rear

Differential Cover Proform

Part # P311-032A0B4 Manu # 69501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $187.11

Differential Cover; 'Perfect Launch' Model; Fits Ford 8.8; Aluminum; Black
Differential Cover; 'Perfect Launch' Model; Fits Ford 8.8 Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Ford 8.8
- Category: Differential Cover
- Emblem: Perfect Launch Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
- Tool Type: Piston Installation Tools
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-145E564 Manu # 66668 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $177.13

Differential Cover; Perfect Launch Model; Fits GM 10 Bolt 8.2/8.5; Alum; Black
Differential Cover; Perfect Launch Model; Fits GM 10 Bolt 8.2/8.5 Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts to Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Gm 10 Bolt 8.2/8.5
- Category: Differential Covers
- Emblem: Perfect Launch Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-0B0767B Manu # 141-695 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $219.73

Differential Cover; Bowtie Emblem Model; Fits GM 7.5; Aluminum; Black Crinkle
Differential Cover; Bowtie Emblem; Fits GM 7.5 Rear Ends; Made From High-Quality Aluminum; Black Crinkle Finish; Features 2 Bolts to Stabilize Bearing Main Caps, Magnetic Drain Plug and Grade 8 Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Gm 7.5
- Category: Differential Covers
- Emblem: Chevy Bowtie Emblem
- Emblem Style: Raised/milled Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Cover To Strengthen The Rear Housing
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
Reinforced lightweight aluminum rear end cover designed to strengthen the rear housing case in heavy torque situations. The familiar Bowtie Emblem is raised and precision milled on a black crinkle coated surface. Each cover includes two bolts to stabilize bearing main caps, a fluid capacity plug, a magnetic drain plug, and Grade 8 mounting bolts. Exterior of the cover has a black crinkle finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-016FF23 Manu # 66667 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $176.15

Differential Cover; 'Perfect Launch' Model; Fits GM 7.5; Aluminum; Black
Differential Cover; 'Perfect Launch' Model; Fits GM 7.5 Inch Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts to Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Gm 7.5
- Category: Differential Covers
- Emblem: Perfect Launch Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-2823D18 Manu # 69504 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $187.34

Differential Cover; Perfect Launch Model; Fits Dana 60; Aluminum; Black
Differential Cover; Perfect Launch Model; Fits Dana 60 Bolt Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Dana 60 Bolt
- Category: Differential Covers
- Emblem: Perfect Launch Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
- Tool Type: Piston Installation Tools
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-23618CB Manu # 141-874 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $348.57

Engine Valve Covers; Tall; Die-Cast; BB Chevy; Polished with No Emblem
Engine Valve Covers; Slant-Edge; Tall Style With Baffles; Polished Finish with No Emblems; Fits 1965 to 1996 396-454 Big Block Chevys; Die-Cast Aluminum; Officially Licensed Chevrolet Performance Product
It's time to give your Big-Block Chevy a long overdue engine makeover. The new Slant-Edge look for big-block is the perfect way to customize your engine so it turns heads when you pop the hood at your local car show! With 13 different finish and Bowtie emblem combinations there's something for everyone, and the best part is that most these valve covers can be complemented with a matching Slant-Edge air cleaner, and breather caps to finish off the look in a perfectly coordinated way. There are three emblems to choose from: raised with a CNC machined finish, recessed and hand painted, blackfield recessed and raised, and lastly a new redfield recessed and raised. These premium die-cast aluminum valve covers have been optimized for maximum internal clearance, and feature innovative die-casting on the intake side so you don't have to struggle with bolts in tight places. Each pair of valve cover includes baffles, rubber grommets, and 6 special length mounting bolts for use on the intake side. Patent Pending.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Differential Cover Proform

Part # P311-379FA76 Manu # 69502 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $179.78

Differential Cover; 'Perfect Launch' Model; Fits GM 12 Bolt; Aluminum; Black
Differential Cover; 'Perfect Launch' Model; Fits GM 12 Bolt Rear Ends; Made From High-Quality Aluminum; Black Finish; Features 2 Bolts To Stabilize Bearing Main Caps, Two Magnetic Drain Plugs and Mounting Bolts. Sold Individually
Product Attributes:
- Applications: Gm 12 Bolt, Passanger Car
- Category: Differential Covers
- Emblem: Perfect Launch Emblem
- Feature/Benefit: Reinforced Lightweight Aluminum Rear End Covers Designed To Strengthen The Rear Housing Case In Heavy Torque Situations.
- Part Type: Differential Cover
- Prop 65 - Short Label: Warning: Cancer And Reproductive Harm
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Pbb / Bbp
- Prop 65 Warning Label: Prop65 Warning C And R.jpg
- Tool Type: Piston Installation Tools
Reinforced lightweight aluminum rear end covers designed to strengthen the rear housing case in heavy torque situations. The PERFECT LAUNCH logo is prominently displayed on a precision milled surface. Each cover includes two bolts to stabilize bearing main caps, fluid capacity and magnetic drain plugs, and mounting bolts. All covers have a black painted finish.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Proform

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1997 Toyota Tacoma Differential Cover