802.589.0911 Live Chat With Us

Shop By Brand

The Following brands are available based on your search.

  • Cardone
    Cardone
  • Dorman
    Dorman

Showing Products For 1997 Ford F-150 Transfer Case Motor

Below are all the different brands and applications for 1997 Ford F-150 Transfer Case Motor

Showing 1 - 8 of 8 Products for Transfer Case Motor.

Refine Your Search

Cardone
1997 Ford F-150 Transfer Case Motor Cardone - New Transfer Case Motor

P311-274A5E7    83-212  New

F6TZ7G360AA , F1TZ7G360C

Qty:
$89.87
Cardone Transfer Case Motor
  • with Round Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # 1D
  • New Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • A Crescent Wrench Can Be Used For This Operation.
      • Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • Designed To Give The Precise Amount Of Power To The Transmission For A Smooth Transition When Changing From 2-wheel Drive To 4-wheel Drive.
      • Designed To Match O.e. Fit And Function For Easy Installation.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Load Testing Ensures Torque Power Specification Meets Industry Standards.
  • Building on decades of experience using reverse engineering to remanufacture automotive motors, CARDONE engineers have meticulously designed and tested our brand-new transfer case motors to match O.E. fit and performance. Each unit is load-tested to ensure the torque power specification meets industry standards. As a direct-fit O.E. replacement, CARDONE® New Transfer Case Motors provide ease of installation and reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Cardone
1997 Ford F-150 Transfer Case Motor Cardone - New Transfer Case Motor

P311-060D779    83-207  New

F75Z7G360AA , XL1Z7G360AA , YL1Z7G360AA , YL1Z7G360A

Qty:
$69.24
Cardone Transfer Case Motor
  • with Harness Plug Terminal Holes Open with Rectangular Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # A
  • New Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • A Crescent Wrench Can Be Used For This Operation.
      • Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • Designed To Give The Precise Amount Of Power To The Transmission For A Smooth Transition When Changing From 2-wheel Drive To 4-wheel Drive.
      • Designed To Match O.e. Fit And Function For Easy Installation.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Load Testing Ensures Torque Power Specification Meets Industry Standards.
  • Building on decades of experience using reverse engineering to remanufacture automotive motors, CARDONE engineers have meticulously designed and tested our brand-new transfer case motors to match O.E. fit and performance. Each unit is load-tested to ensure the torque power specification meets industry standards. As a direct-fit O.E. replacement, CARDONE® New Transfer Case Motors provide ease of installation and reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Cardone
1997 Ford F-150 Transfer Case Motor Cardone - Reman. Transfer Case Motor

P311-580E06C    48-212  Remanufactured

F6TZ7G360AA

Qty:
$20.70 $90.09
Cardone Transfer Case Motor
  • Remanufactured Transfer Case Motor
  • with Round Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # 1D
  • Reman. Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • A Crescent Wrench Can Be Used For This Operation.
      • Can I Install The Replacement Motor If My Tranfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate Motor Off The Transfer Case Or You Will Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • All Motors Are 100% Torque Tested To Ensure Strength For Proper Gear Engagement.
      • Each Unit Is 100% Computer Tested At 3 Points During The Remanufacturing Process For Guaranteed Performance.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Motor Magnets Are 100% Recharged For Superior Performance And Reliability.
      • Transfer Case Motor Sensors Are 100% Replaced With New, O.e.-quality Sensors For Superior Performance And Long Product Life.
  • CARDONE® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Cardone
1997 Ford F-150 Transfer Case Motor Cardone - Reman. Transfer Case Motor

P311-0E1576F    48-211  Remanufactured

F1TZ7G360C

Qty:
$20.70 $85.58
Cardone Transfer Case Motor
  • Remanufactured Transfer Case Motor
  • with Round Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # D
  • Reman. Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • A Crescent Wrench Can Be Used For This Operation.
      • Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • All Motors Are 100% Torque Tested To Ensure Strength For Proper Gear Engagement.
      • Each Unit Is 100% Computer Tested At 3 Points During The Remanufacturing Process For Guaranteed Performance.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Motor Magnets Are 100% Recharged For Superior Performance And Reliability.
      • Transfer Case Motor Sensors Are 100% Replaced With New, O.e.-quality Sensors For Superior Performance And Long Product Life.
  • CARDONE® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Cardone
1997 Ford F-150 Transfer Case Motor Cardone - Reman. Transfer Case Motor

P311-59B3DF6    48-216  Remanufactured

YL3Z7G360AA

Qty:
$18.00 $114.30
Cardone Transfer Case Motor
  • Remanufactured Transfer Case Motor
  • with Harness Plug Terminal Holes Closed with Rectangular Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # A
  • Reman. Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • Can I Install The Replacement Motor If My Tranfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Replacement Motor Drive Is Placed In A 2 Wheel Drive Position At The Factory.
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • All Motors Are 100% Torque Tested To Ensure Strength For Proper Gear Engagement.
      • Each Unit Is 100% Computer Tested At 3 Points During The Remanufacturing Process For Guaranteed Performance.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Motor Magnets Are 100% Recharged For Superior Performance And Reliability.
      • Transfer Case Motor Sensors Are 100% Replaced With New, O.e.-quality Sensors For Superior Performance And Long Product Life.
  • CARDONE® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Cardone
1997 Ford F-150 Transfer Case Motor Cardone - Reman. Transfer Case Motor

P311-4777D60    48-207  Remanufactured

YL3Z7G360AA , YL1Z7G360AA , F75Z7G360AA

Qty:
$24.30 $68.94
Cardone Transfer Case Motor
  • Remanufactured Transfer Case Motor
  • with Harness Plug Terminal Holes Open with Rectangular Plug with 7 Pin Connector I.D. #(s) w/Sensor I.D. # A
  • Reman. Transfer Case Motor
  • Product Attributes:
    • FAQs:
      • A Crescent Wrench Can Be Used For This Operation.
      • Can I Install The Replacement Motor If My Tranfer Case Motor Failed In 4 Wheel Drive Low Or High?
      • Do Not Operate Motor Off The Transfer Case Or You Will Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate. Shift The Transfer Case Into The Position Of The Motor To Install.
      • The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position.
      • The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?
      • The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?
      • This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer. If The Motor Attempts To Shift, But Sounds Weak, Check The Front Ax
      • What Drivetrain Position Is The Replacement Motor Drive Placed In?
      • What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?
      • Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually.
    • Features and Benefits:
      • All Motors Are 100% Torque Tested To Ensure Strength For Proper Gear Engagement.
      • Each Unit Is 100% Computer Tested At 3 Points During The Remanufacturing Process For Guaranteed Performance.
      • Every Motor Is Assembled With The Precise Amount Of Lubricant To Ensure Quiet Operation And Long Life.
      • Motor Magnets Are 100% Recharged For Superior Performance And Reliability.
      • Transfer Case Motor Sensors Are 100% Replaced With New, O.e.-quality Sensors For Superior Performance And Long Product Life.
  • CARDONE® Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Brand: Cardone
Additional Fitment Information:
Vehicle Drive Type
1997 - Ford F-150 4WD
Dorman
1997 Ford F-150 Transfer Case Motor Dorman

P311-207C88F    600-801  New

48-211 , UMM4357 , F6TZ7G360AA , 48-212 , 48-203 , F1TZ7G630C

Qty:
$88.01
Dorman Transfer Case Motor
  • ; Fits Borg Warner 1356 Transfer Case Round Plug w/7 Pins
  • Product Attributes:
    • Package Contents: Motor Assembly
    • Terminal Type: Pin
Brand: Dorman
Additional Fitment Information:
Vehicle
1997 - Ford F-150
Dorman
1997 Ford F-150 Transfer Case Motor Dorman

P311-20FC177    600-802  New

48-214 , YL1Z7G360AA , YL1Z7G360A , 48-207 , A345420 , 48-216 , YL1Z7G360AB

Qty:
$97.92
Dorman Transfer Case Motor
  • ; Fits Borg Warner 4406 Transfer Case Rectangular Plug w/7 Pins ID Nos. F75A 7A195-CB, F75A 7A195-HA, or F75A 7A195-HB
  • Product Attributes:
    • Package Contents: Motor Assembly
    • Terminal Type: Pin
Brand: Dorman
Additional Fitment Information:
Vehicle
1997 - Ford F-150

Showing 1 - 8 of 8 Products for Transfer Case Motor.