Finish Selecting Your Vehicle

Choose your Engine for your 1997 Ford E-150 Econoline Club Wagon

  • 6 Cyl 4.2L
  • 8 Cyl 4.6L
  • 8 Cyl 5.4L

Shop By Brand

The Following brands are available based on your search.

  • Accel
    Accel
  • Delphi
    Delphi
  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • GBR Fuel Injection
    GBR Fuel Injection
  • Holley
    Holley
  • Motorcraft
    Motorcraft
  • Standard Ignition
    Standard Ignition

Showing Products For 1997 Ford E-150 Econoline Club Wagon Fuel Injector

Below are all the different brands and applications for 1997 Ford E-150 Econoline Club Wagon Fuel Injector

Showing 1 - 10 of 44 Products for Fuel Injector.

Refine Your Search

Motorcraft
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 5.4L Motorcraft

P311-04D855B    W0133-2623146  New

Qty:
In Stock & Ready to Ship
$297.02
Motorcraft Fuel Injector
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Motorcraft
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 5.4L 330 -
GBR Fuel Injection
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 4.6L GBR Fuel Injection - Reman Multi Port Fuel Injector

P311-0860155    822-11124  New

Qty:
In Stock & Ready to Ship
$10.00 $35.91
GBR Fuel Injection Fuel Injector
  • Always replace fuel filter when injector is replaced.
  • Reman Multi Port Fuel Injector
  • GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
Brand: GBR Fuel Injection
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 4.6L 281 -
GBR Fuel Injection
1997 Ford E-150 Econoline Club Wagon Fuel Injector 6 Cyl 4.2L GBR Fuel Injection - Reman Multi Port Fuel Injector

P311-3FA25D5    822-11132  New

Qty:
In Stock & Ready to Ship
$10.00 $32.36
GBR Fuel Injection Fuel Injector
  • Always replace fuel filter when injector is replaced.
  • Reman Multi Port Fuel Injector
  • GB’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.
  • Suggested Purchase Quantity: 6
    • Most jobs typically require 6 of this item.
Brand: GBR Fuel Injection
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 6 Cyl 4.2L 256 -
Standard Ignition
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 5.4L Standard Ignition

P311-253BC2A    FJ713  New

0280150734 , 0280150762 , 0280150766 , 0280150939 , 142-211 , 142-247 , 155-0074 , 15505 , 15558 , 15888 , 17119104 , 19112314 , 2-18045 , 217-1946 , 217-2380 , 217-8 , 22-11111 , 22-11124 , 3-18045 , 4G1251 , 4G1484 , 57045 , 621015 , 800-1060N , 822-11111 , 822-11124 , 89053841 , CM4681 , CM5041 , E2TZ-9F593-A , E2TZ9F593A , E8TZ-9F593D , F0TZ-9F593-D1A , F0TZ-9F593-D5A , F0TZ-9F593A , F0TZ-9F593C , F0TZ9F593DA , F1VY-9F593A , F2TZ-9F593A , FJ10093 , FJ10102 , FJ10683 , FJ10692 , FJ713T , FOTZ-9F593-DA , M181 , MP-10898 , MP2020

Qty:
In Stock & Ready to Ship
$72.72
Standard Ignition Fuel Injector
  • Fuel Injector
  • with Red Connector Single Injector New
  • Product Attributes:
    • Fuel Injector Type: Mfi Injector
    • Fuel Type: Gas
    • New or Reman: New
    • O-Rings Included: Yes
    • System Type: Top Feed
    • Terminal Gender: Male
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • Stainless-steel calibration slide and spring assembly prevents corrosion within the fuel control body, which leads to an extended service life. Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel. High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions. Fiber-optic yttrium aluminum garnet YAG laser welding and 100 million cycle testing ensure quality in every box.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 5.4L 330 -
Motorcraft
1997 Ford E-150 Econoline Club Wagon Fuel Injector 6 Cyl 4.2L Motorcraft

P311-09C9C44    W0133-2776534  New

Qty:
In Stock & Ready to Ship
$93.53
Motorcraft Fuel Injector
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: Motorcraft
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 6 Cyl 4.2L 256 -
Delphi
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 4.6L Delphi

P311-3857ACD    FJ10093  New

0 280 150 718 , 0 280 150 731 , 0280150718 , 0280150731 , 142-211 , 142211 , 16174 , 217246 , 217251 , 2178 , 218045 , 218622 , 4G1251 , 57045 , 57069 , CM-4663 , CM-4672 , CM-4718 , CM-4739 , CM-5041 , CM4663 , CM4672 , CM4718 , CM4739 , CM5041 , E5TZ 9F593-B , E5TZ9F593B , E8TZ 9F593-C , E8TZ 9F593-D , E8TZ9F593C , E8TZ9F593D , F0TZ 9F593-C , F0TZ 9F593-D , F0TZ 9F593-DA , F0TZ9F593C , F0TZ9F593DA , F2TZ 9F593-A , F2TZ9F593A , FI1002 , FI1082 , FI1154 , FJ58 , FJ66 , FJ66T , FJ68 , FJ713 , FJ8 , FOTZ 9F593-D , FOTZ 9F593-DA , FOTZ9F593DA , M181

Qty:
In Stock & Ready to Ship
$94.56
Delphi Fuel Injector
  • Fuel Injector
  • Product Attributes:
    • Attachment Method: Clip
    • Body Material: Metal And Plastic
    • Connector Gender: Female
    • Connector Shape: Rectangle
    • Fuel Injection Type: Gas
    • Fuel Type: Gas
    • Mounting Hardware Included: No
    • New or Reman'd: New
    • O-Ring Quantity: 2
    • Retainer Clips Included: No
    • System Type: Light Duty Injector
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part.
  • Suggested Purchase Quantity: 8
    • Most jobs typically require 8 of this item.
Brand: Delphi
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 4.6L 281 -
Accel
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 5.4L Accel - Performance Fuel Injector Stock Replacement

P311-2C90313    150821  New

Qty:
In Stock & Ready to Ship
$549.41
Accel Fuel Injector
  • Flow Rate 21 lb.; EV1 Minitimer Style; High Impedance; 8 pc
  • Performance Fuel Injector Stock Replacement; Flow Rate 21 lb.; EV1 Minitimer Style; High Impedance; 8 pc;
  • Performance Fuel Injector Stock Replacement
  • Product Attributes:
    • Body Length: 2.850 In.
    • Body Type: Ev1
    • Connector Series: Ev1 - Jetronic / Minitimer
    • Flow Rate: 21 Lbs./hr.
    • Fuel Rate: 21 Lbs./hr
    • Impedance: 14.5 Ohms
    • O-Ring to O-Ring: 2.390 In.
    • Package Quantity: 8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Provides Precise Control Of Fuel Delivery And Atomization
    • Increases Power/Improves Throttle Response/Better Fuel Economy
    • All New Units
    • Not Modified Or Remanufactured From Used Cores
    • New Low-Mass Disc Design
    • Accurate Metering Control Even At Ultra-Low And High Duty Cycles
  • ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units; not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.
Brand: Accel
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 5.4L 330 -
Accel
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 5.4L Accel - Performance Fuel Injector Stock Replacement

P311-56B2A4F    150824  New

Qty:
In Stock & Ready to Ship
$527.23
Accel Fuel Injector
  • Flow Rate 24 lb.; EV1 Minitimer Style; High Impedance; 8 pc
  • Performance Fuel Injector Stock Replacement; Flow Rate 24 lb.; EV1 Minitimer Style; High Impedance; 8 pc;
  • Performance Fuel Injector Stock Replacement
  • Product Attributes:
    • Body Length: 2.850 In.
    • Body Type: Ev1
    • Connector Series: Ev1 - Jetronic / Minitimer
    • Flow Rate: 24 Lbs./hr.
    • Fuel Rate: 24 Lbs./hr
    • Impedance: 14.5 Ohms
    • O-Ring to O-Ring: 2.390 In.
    • Package Quantity: 8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • New Quieter Design Outflows The Competition
    • Tested For Guaranteed performance And Reliability
    • 3/8 in. NPT Inlet/Outlet For Easy Installation
    • Universal Fit - Includes Mounting Bracket
  • ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for improved throttle response. They are all new units; not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.
Brand: Accel
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 5.4L 330 -
Standard Ignition
1997 Ford E-150 Econoline Club Wagon Fuel Injector 8 Cyl 5.4L Standard Ignition

P311-4C56A96    FJ713RP4  New

2-18045-4 , 57045-4 , FJ713RP4

Qty:
In Stock & Ready to Ship
$268.47
Standard Ignition Fuel Injector
  • Fuel Injector
  • Rail Pack New
  • Product Attributes:
    • Fuel Injector Type: Mfi Injector
    • Fuel Type: Gas
    • New or Reman: New
    • O-Rings Included: Yes
    • System Type: Top Feed
    • Terminal Gender: Male
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • Our advanced flow matched injectors promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions. Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life. Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel. High-temp Viton o-rings enable prolonged sealing of injector under extreme heat conditions. Fiber optic yttrium aluminum garnet YAG laser welding and 100 million cycle testing ensure quality in every box. With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues. As a global manufacturer, we have complete control of the manufacturing process from componentry to finished product.
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 8 Cyl 5.4L 330 -
Standard Ignition
1997 Ford E-150 Econoline Club Wagon Fuel Injector 6 Cyl 4.2L Standard Ignition

P311-2CD4C9B    FJ626RP6  New

2-18276-6 , 57769-6 , FJ626RP6

Qty:
In Stock & Ready to Ship
$402.47
Standard Ignition Fuel Injector
  • Fuel Injector
  • Rail Pack New
  • Product Attributes:
    • Fuel Injector Type: Mfi Injector
    • Fuel Type: Gas
    • New or Reman: New
    • O-Rings Included: Yes
    • System Type: Top Feed
    • Terminal Gender: Male
    • Terminal Quantity: 2
    • Terminal Type: Blade
  • Our advanced flow matched injectors promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions. Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life. Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel. High-temp Viton o-rings enable prolonged sealing of injector under extreme heat conditions. Fiber optic yttrium aluminum garnet YAG laser welding and 100 million cycle testing ensure quality in every box. With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues. As a global manufacturer, we have complete control of the manufacturing process from componentry to finished product.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle Block Engine CID CC
1997 - Ford E-150 Econoline Club Wagon V 6 Cyl 4.2L 256 -

Showing 1 - 10 of 44 Products for Fuel Injector.