Finish Selecting Your Vehicle

Choose your Engine for your 1997 AM General Hummer

  • 8 Cyl 6.5L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Rotomaster
    Rotomaster
  • Thermo-Tec
    Thermo-Tec

Showing Products For 1997 AM General Hummer Turbocharger

Below are all the different brands and applications for 1997 AM General Hummer Turbocharger

Showing 1 - 8 of 8 Products for Turbocharger.

Refine Your Search

Rotomaster
1997 AM General Hummer Turbocharger Rotomaster - New Turbocharger

P311-54FBB29    J1650107N  New

12532429

Qty:
In Stock & Ready to Ship
$800.79
Rotomaster Turbocharger
  • Turbocharger
  • Engine oil and filter MUST be changed to ensure proper replacement turbo function. Refer to installation guide in box. Failure to follow VOIDS WARRANTY Special order only - SKU cannot be ordered as a part of a stocking PO. Please work with your sales rep on availability
  • New Turbocharger
  • Product Attributes:
    • Bearing Type: Journal
    • E-Waste: No
    • FAQs:
      • Can The Turbocharger Fail If A Foreign Object Is Sucked In?
      • Do I Need To Let The Engine Cool Off Before Shutting Down?
      • Do I Need To Replace The Engine Oil At Regular Intervals?
      • Do Your Aftermarket Turbochargers Meet Emission Regulations?
      • Yes, All Turbochargers Are Engineered To Match O.e. Performance And Comply With All Federal Regulations.
      • Yes, Cutting Off The Supply Of Fresh Oil To A Hot Turbocharger Can Cause Oil Coking.
      • Yes, Most Turbocharger Failures Are Caused By Oil Starvation From Old Or Contaminated Oil.
      • Yes, Replacing The Air Filter And Cleaning Entire Air And Exhaust System Will Prevent Damage To The Fragile Blades On The Turbocharger Wheels.
    • Features and Benefits:
      • 100% Dynamic Balancing Of Compressor Wheels, Turbine Shaft/wheel Assemblies And Complete Rotating Assembly Guarantees Proper Operation And Extends Unit Life.
      • 100% Dynamic Balancing Of Compressor Wheels, Turbine Shaft/wheel Assemblies And Complete Rotating Assembly Guarantees Proper Operation And Extends Unit Life.
      • All Units Come With The Required Gaskets And Mounting Hardware For Easy Installation.
      • Comes With A Pre-lube Syringe To Ensure Product Protection During Installation.
      • Manufactured With 100% New Components And Tested To Ensure Trouble-free Operation
      • Meets Or Exceeds O.e. Performance.
      • Unit Comes With A Pre-lube Syringe To Ensure Product Protection During Installation.
      • Unit Comes With The Required Gaskets And Mounting Hardware For Easy Installation.
    • Mounting Bracket Included: No
    • Mounting Hardware Included: No
    • Package Contents: Turbocharger
    • Product Condition: New
    • Product Description: Rotomaster 100% New Turbochargers Are Available For A Vast Array Of Automotive Applications To Meet The Growing Demand For Maximum Vehicle Performance With Optimal Fuel Efficiency. Every Rotomaster Turbocharger Has Been Designed And Tested To Guarantee O.
    • Troubleshooting Tip:
      • A Decrease In Engine Power May Be Your First Indication Your Turbocharger Is Damaged Or Has Failed.
      • Any Nicks, Scratches, Or Chips On Either Wheel Are Evidence Foreign Object Damage Caused By Contaminants Entering The Airflow To Or From The Engine.
      • Axial End Play Of The Wheels And Shaft In And Out Greater Than The Thickness Of A Sheet Of Paper Indicates A Worn Thrust Bearing Due To Excessive Exhaust Backpressure.
      • Before A Failed Turbocharger Is Replaced The Original Cause Of Failure Must Be Diagnosed And Corrected To Protect The New Installation.
      • Common Signs Of Wear Indicating Replacement May Be Required:
      • Contact Of Either Wheel Resulting From Excessive Radial Play Indicates Worn Rotating Components Likely Due To Improper Lubrication.
      • Worn Engines With Excessive Blow By Will Result In Crankcase Pressurization, Leading To Oil Leaking From The Turbochargers Internal Seals. This May Result In Oil Deposits In The Intake Manifold Or Smoke In The Exhaust. This Is Not Necessarily A Sign Of
    • Turbocharger Cooling Method: Oil
    • Wastegate Actuator Included: Yes
  • Rotomaster 100% New Turbochargers are available for a vast array of automotive applications to meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back on the road and back to peak performance with these brand-new, direct-replacement turbochargers.
Brand: Rotomaster
Additional Fitment Information:
Vehicle Engine VIN
1997 - AM General Hummer Z
BBB Industries
1997 AM General Hummer Turbocharger 8 Cyl 6.5L BBB Industries - Reman Turbocharger with Gasket and Installation Kit

P311-0DFF289    D3009  Remanufactured

05744470 , 5744470

Qty:
In Stock & Ready to Ship
$80.00 $821.78
BBB Industries Turbocharger
  • Reman Turbocharger with Gasket and Installation Kit
  • Product Attributes:
    • Bearing Type: Journal
    • Cooling Method: Oil Cooled
    • Exhaust Brake: No
    • Meets or Exceeds Original Equipment Manufacture Specifications: Meets Or Exceeds Oem Specs
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Oil Supply Line Included: No
    • Position Sensor: No
    • Speed Sensor: No
    • Temperature Sensor: No
    • Turbine Type: Fixed Geometry
    • Wastegate Actuator Included: Yes
    • Wastegate Type: Pneumatic
Brand: BBB Industries
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1997 - AM General Hummer Turbocharged V 8 Cyl 6.5L 395 -
BBB Industries
1997 AM General Hummer Turbocharger 8 Cyl 6.5L BBB Industries - New Turbocharger with Gasket and Installation Kit

P311-3F80F55    D3009N  New

05744470 , 5744470

Qty:
In Stock & Ready to Ship
$1,027.22
BBB Industries Turbocharger
  • New Turbocharger with Gasket and Installation Kit
  • Product Attributes:
    • Bearing Type: Journal
    • Cooling Method: Oil Cooled
    • Exhaust Brake: No
    • Meets or Exceeds Original Equipment Manufacture Specifications: Meets Or Exceeds Oem Specs
    • Mounting Bracket Included: Yes
    • Mounting Hardware Included: Yes
    • Oil Supply Line Included: No
    • Position Sensor: No
    • Speed Sensor: No
    • Temperature Sensor: No
    • Turbine Type: Fixed Geometry
    • Wastegate Actuator Included: Yes
    • Wastegate Type: Pneumatic
Brand: BBB Industries
Additional Fitment Information:
Vehicle Aspiration Block Engine CID CC
1997 - AM General Hummer Turbocharged V 8 Cyl 6.5L 395 -
Cardone
1997 AM General Hummer Turbocharger Cardone - Turbocharger

P311-467FD27    2T-112  Remanufactured

12532429

Qty:
In Stock & Ready to Ship
$287.10 $597.54
Cardone Turbocharger
  • Engine oil and filter MUST be changed to ensure proper replacement turbo function. Refer to installation guide in box. Failure to follow VOIDS WARRANTY Special order only - SKU cannot be ordered as a part of a stocking PO. Please work with your sales rep on availability
  • Turbocharger
  • Product Attributes:
    • Bearing Type: Journal
    • E-Waste: No
    • FAQs:
      • Can The Turbocharger Fail If A Foreign Object Is Sucked In?
      • Do I Need To Let The Engine Cool Off Before Shutting Down?
      • Do I Need To Replace The Engine Oil At Regular Intervals?
      • Do Your Aftermarket Turbochargers Meet Emission Regulations?
      • Yes, All Turbochargers Are Engineered To Match O.e. Performance And Comply With All Federal Regulations.
      • Yes, Cutting Off The Supply Of Fresh Oil To A Hot Turbocharger Can Cause Oil Coking.
      • Yes, Most Turbocharger Failures Are Caused By Oil Starvation From Old Or Contaminated Oil.
      • Yes, Replacing The Air Filter And Cleaning Entire Air And Exhaust System Will Prevent Damage To The Fragile Blades On The Turbocharger Wheels.
    • Features and Benefits:
      • 100% Of Rotating, Journal, And Thrust Bearings And Seals Are Replaced, And All Mating Surfaces/passages Are Renewed As Required For A Longer-lasting Unit.
      • All Components Are Inspected To Exact Standards, And Renewed As Appropriate To Ensure That Problematic Areas That Typically Cause Failure Are Renewed To The Highest Quality Standards.
      • All Wheels, Shafts And Corresponding Bores Are Measured And Controlled With Specific Go/no-go Tolerances And Renewed Or Replaced As Needed To Ensure Trouble-free Operation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Each Unit Comes With A Pre-lube Syringe To Ensure Product Protection During Installation.
      • Each Unit Is 100% Disassembled And Thoroughly Cleaned Using Proprietary Processes And Dedicated Specialized Equipment.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
    • Mounting Bracket Included: No
    • Mounting Hardware Included: No
    • Package Contents: Turbocharger; Gasket; O-ring; Syringe; Instruction Sheet
    • Product Condition: Remanufactured
    • Turbocharger Cooling Method: Oil
    • Wastegate Actuator Included: Yes
  • CARDONE Remanufactured Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every CARDONE turbocharger has been designed and tested to guarantee O.E. fit and performance. Your vehicle will be back to peak performance with these remanufactured, direct-replacement turbochargers.
Brand: Cardone
Additional Fitment Information:
Vehicle Engine VIN
1997 - AM General Hummer Z
Thermo-Tec
Turbocharger Thermo-Tec

P311-0B1E277    15073  New

Qty:
In Stock & Ready to Ship
$148.62
Thermo-Tec Turbocharger
  • Rogue Series Ricochet Turbo Cover
  • Rogue Series Ricochet Turbo Cover; T3; Black;
  • Features:
    • New Easy Fit Design
    • Keeps Turbine Spooled Reducing Turbo Lag
    • Dual Layer Construction
    • Increases Performance And Durability
    • Reduces Under Hood Temperatures
    • Improves Horsepower And Performance
    • Maintains Temperatures Inside The Turbo
    • Includes Wiring For Easy Installation
  • The new, easy fit design of the Rogue Series Turbo Cover keeps the turbine spooled up, reducing turbo lag. The dual layer construction increases performance and durability, reduces under hood temperatures, improves horsepower and performance by maintaining temperatures inside the turbo. Includes wiring for easy installation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-1ABA984    15003  New

Qty:
In Stock & Ready to Ship
$54.37
Thermo-Tec Turbocharger
  • Turbo Insulating Kit
  • Turbo Insulating Kit; Includes Turbo Insulation Cover Only;
  • Features:
    • Easy Fit Design
    • Improves Turbo Lag Problems
    • Reduces Temperature Under The Hood
    • Construction Increases Performance And Durability
    • Made In The USA
  • The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. The key to turbo performance is to keep a flow of high temperature exhaust gases moving through the exhaust side impeller. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications.Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1 or 2 inch, 1 yard of Aluminized Heat Barrier, and a 3-foot X 6-inch piece of Exhaust Insulating Wrap. Hardware and instructions are included. Also available with the turbo insulation cover only containing a 3-foot X 6-inch piece of exhaust wrap and a 20-inch X 24-inch piece of Aluminized Heat Barrier.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-57E2465    15004  New

Qty:
In Stock & Ready to Ship
$229.70
Thermo-Tec Turbocharger
  • Turbo Insulating Kit
  • Turbo Insulating Kit; Includes Grommets And Wiring; Fits T3 And T4 Turbine;
  • Features:
    • Easy Fit Design
    • Improves Turbo Lag Problems
    • Reduces Temperature Under The Hood
    • Construction Increases Performance And Durability
    • Made In The USA
  • The Turbo Kit was designed to protect, improve performance, and eliminate turbo lag of a turbo charger. The key to turbo performance is to keep a flow of high temperature exhaust gases moving through the exhaust side impeller. This complete kit, to contain the heat produced by a turbo, fits a wide variety of turbines. The custom cut-to-fit kit comes with an excessive amount of material to cover turbos from the smallest automotive application to heavy-duty truck applications.Two Turbo Kits are available - a four cylinder kit, and a six and eight cylinder kit. Each kit contains a roll of Exhaust Insulating Wrap 1 or 2 inch, 1 yard of Aluminized Heat Barrier, and a 3-foot X 6-inch piece of Exhaust Insulating Wrap. Hardware and instructions are included. Also available with the turbo insulation cover only containing a 3-foot X 6-inch piece of exhaust wrap and a 20-inch X 24-inch piece of Aluminized Heat Barrier.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle
Thermo-Tec
Turbocharger Thermo-Tec

P311-2DB5F99    15074  New

Qty:
In Stock & Ready to Ship
$215.86
Thermo-Tec Turbocharger
  • Rogue Series Ricochet Turbo Cover
  • Rogue Series Ricochet Turbo Cover; T4; Black;
  • Features:
    • New Easy Fit Design
    • Keeps Turbine Spooled Reducing Turbo Lag
    • Dual Layer Construction
    • Increases Performance And Durability
    • Reduces Under Hood Temperatures
    • Improves Horsepower And Performance
    • Maintains Temperatures Inside The Turbo
    • Includes Wiring For Easy Installation
  • The new, easy fit design of the Rogue Series Turbo Cover keeps the turbine spooled up, reducing turbo lag. The dual layer construction increases performance and durability, reduces under hood temperatures, improves horsepower and performance by maintaining temperatures inside the turbo. Includes wiring for easy installation.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Thermo-Tec
Additional Fitment Information:
Vehicle

Showing 1 - 8 of 8 Products for Turbocharger.