Showing Products For 1996 Nissan Pickup Engine Control Module (ECM)

Below are all the different brands and applications for 1996 Nissan Pickup Engine Control Module (ECM)

Showing 1 - 6 of 6 Products for Engine Control Module (ECM).

Refine Your Search

Holley
Engine Control Module (ECM) Holley

P311-46930FE    550-660  New

Qty:
In Stock & Ready to Ship
$3,630.35
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; LS2 Main Harness W/EV1 Injector Harness; W/Transmission Control/DBW; Fits GM LS2/LS3/LS7;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module (ECM) Holley

P311-021DB1C    550-655  New

Qty:
In Stock & Ready to Ship
$3,467.79
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; Ford Cop Main Harness W/EV1 Injector Harness; W/Coil/Plug Main; Fits Small Block Ford;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module (ECM) Holley

P311-1CAB4A5    550-653  New

Qty:
In Stock & Ready to Ship
$3,251.06
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; Ford Main Harness W/EV1 Injector Harness; H-1 in. To 1.84 in.; L-13.14 in.; W-6.10 in.; Fits Small Block Ford;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module (ECM) Holley

P311-01DCA52    550-652  New

Qty:
In Stock & Ready to Ship
$3,251.06
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; Universal Main Harness W/EV1 Injector Harness; H-1 in. To 1.84 in.; L-13.14 in.; W-6.10 in.; Fits Chrysler Small Block;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module (ECM) Holley

P311-02AA1F6    550-650  New

Qty:
In Stock & Ready to Ship
$3,251.06
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; LS1 Main Harness W/EV1 Injector Harness; H-1 in. To 1.84 in.; L-13.14 in.; W-6.10 in.; Fits GM LS1/LS2/LS6;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module (ECM) Holley

P311-3D2F231    550-651  New

Qty:
In Stock & Ready to Ship
$3,251.06
Holley Engine Control Module (ECM)
  • Dominator EFI ECU Kit
  • Dominator EFI ECU Kit; LS2 Main Harness W/EV1 Injector Harness; H-1 in. To 1.84 in.; L-13.14 in.; W-6.10 in.; Fits GM LS2/LS3/LS7;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Fuel Map And Learn Function Smoothing
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • ECU Is Fully Potted And Can Be Mounted In The Engine Compartment Or Interior
    • Fully Configurable Lap Top Gauge Panel
    • Lean Or Rich Safety Cutoff
    • Allows For Two Nozzles To Be Controlled
    • Gear Based Boost Control Configurable By Several Different Methods
  • Dominator(R) EFI Vehicle Management Systems are intended for non-emissions street and racing engine applications. In addition to the transmission control, drive by wire, and dual wideband oxygen sensor options, Dominator(R) systems have nearly unlimited capabilities to control any power adder, input, or output you can throw at them. Need to run a turbocharged, nitrous injected 8 cylinder running water-methanol injection? No problem with Dominator(R) EFI. How about control a 4L80E transmission as well as the fuel and spark on your street rod? No problem. There are also enough inputs and outputs to allow the Dominator(R) VMSs to serve as their own data acquisition and control module. The Dominator(R) VMS will eliminate the need for additional controllers as they are all contained in this one unit. The only thing limiting the Dominator(R) Vehicle Management System is your imagination!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 6 of 6 Products for Engine Control Module (ECM).