Finish Selecting Your Vehicle

Choose your Engine for your 1996 Hyundai Elantra

  • 4 Cyl 1.8L

Shop By Brand

The Following brands are available based on your search.

  • Aisin
    Aisin
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mando
    Mando
  • Mapco
    Mapco
  • Maval
    Maval
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 1996 Hyundai Elantra Power Steering Pump

Below are all the different brands and applications for 1996 Hyundai Elantra Power Steering Pump

Showing 1 - 10 of 28 Products for Power Steering Pump.

Refine Your Search

Cardone
1996 Hyundai Elantra Power Steering Pump Cardone - Power Steering Pump

P311-250C4A6    21-5952  Remanufactured

5711027000 , 5711029100 , 5711029101

Qty:
In Stock & Ready to Ship
$35.10 $100.37
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron/aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Bolt-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1996 - Hyundai Elantra
Mapco
1996 Hyundai Elantra Power Steering Pump Mapco

P311-56A0EBD    96263M  Remanufactured

21-5952 , 5349 , 57110-29100

Qty:
In Stock & Ready to Ship
$35.00 $128.08
  • POWER STEERING PUMP
Brand: Mapco
Additional Fitment Information:
Vehicle
1996 - Hyundai Elantra
Aisin
1996 Hyundai Elantra Power Steering Pump 4 Cyl 1.8L Aisin

P311-2B486BB    SPK-019  New

57110-27000 , 57110-29101 , SPK-019

Qty:
In Stock & Ready to Ship
$147.71
Aisin Power Steering Pump
  • OE Power Steering Pump
  • Precision OE manufactured Power Steering Pump
Brand: Aisin
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Hyundai Elantra L 4 Cyl 1.8L - 1795
Mando
1996 Hyundai Elantra Power Steering Pump 4 Cyl 1.8L Mando - New Original Equipment

P311-5793601    20A1026  New

Qty:
In Stock & Ready to Ship
$122.40
Mando Power Steering Pump
  • New OE Power Steering Pump, Direct Replacement
  • New Original Equipment
  • When a Power Steering (PS) Pump goes bad or fails, a driver most evidently will experience an abnormal whining/grinding noise occurring while turning the wheel and will eventually feel loss of steering response & assist. The PS pump is an essential component, as its responsibility is to send hydraulic fluid to the power steering rack and pinion. Mando OE power steering pumps are just like the one from the factory. Our pumps come complete with pulley and ready to install. Don’t risk using just any aftermarket PS pump, get the job done right with the original – We Are OE!
Brand: Mando
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Hyundai Elantra L 4 Cyl 1.8L - 1795
Cardone
1996 Hyundai Elantra Power Steering Pump Cardone - Power Steering Pump

P311-50C7CF2    96-5952  New

5711027000 , 5711029100 , 5711029101

Qty:
In Stock & Ready to Ship
$233.12
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron/aluminum
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: New
    • Pulley Attachement Type: Bolt-on
    • Pulley Included: Yes
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle
1996 - Hyundai Elantra
Mapco
Power Steering Pump Mapco

P311-3F7F6AE    97240M  New

Qty:
In Stock & Ready to Ship
$150.00 $136.09
  • Power Steering Pump

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mapco
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-451672B    6170AL-2  New

Qty:
In Stock & Ready to Ship
$180.09
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; AN-6 And AN-10 Fitting; M8x1.25 Threaded Hole Mtg; Btm Pressure Port; For StreetRods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rating
    • 3 GPM Flow
    • Bottom Pressure Port
    • Clockwise Rotation Only
    • 100% New Components
    • Made In The U.S.A.
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2AA7DBB    6174A  New

Qty:
In Stock & Ready to Ship
$229.90
Tuff Stuff Performance Accessories Power Steering Pump
  • Saginaw Style Power Steering Pump
  • Saginaw Style Power Steering Pump; Univ. Fit; 5/8 in. Keyed Shaft; 850 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Chrome;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
    • Requires A Bolt On Pulley Which Is Not Included
    • Clockwise Rotation Only
    • 850 PSI Rating
    • 2 GPM Flow
    • 100% New Components
    • Made In The U.S.A.
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2135F81    6175AL-2  New

Qty:
In Stock & Ready to Ship
$178.98
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; An-6 And AN-10 Fittings; M8x1.25 Threaded Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rated To Work With Most Gear Boxes
    • 3 GPM Flow
    • Top Pressure Port
    • Clockwise Rotation Only
    • 100% New Components
    • Made In The U.S.A.
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle
Tuff Stuff Performance Accessories
Power Steering Pump Tuff Stuff Performance Accessories

P311-2D8BCEB    6170AL-1  New

Qty:
In Stock & Ready to Ship
$159.22
Tuff Stuff Performance Accessories Power Steering Pump
  • Type II Alum. Power Steering Pump
  • Type II Alum. Power Steering Pump; GM PressureSlipFitting; M8x1.25 Threaded Hole Mtg; Btm PressurePort; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
  • Features:
    • Compact Size Ideal For Tight Applications
    • Requires A Press Fit Pulley Not Included
    • 1200 PSI Rating
    • 3 GPM Flow
    • Bottom Pressure Port
    • 100% New Components
    • Made In The U.S.A.
    • Clockwise Rotation Only
  • Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Tuff Stuff Performance Accessories
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 28 Products for Power Steering Pump.