Thermal Protection Hose Sleeve Heatshield Products
P311-3CB46F6 244012 New
Qty:
In Stock & Ready to Ship
$45.71
- Reflects up to 90% of heat, Hook & Loop closure, Flexible and lightweight
- Cold Gold Sleeve acts as a thermal barrier capable of reflecting up to 95 percent of radiant heat away (requires minimum of 1 inch of airspace). Use on your fuel lines, wiring looms, air intake, and air conditioning hoses to shield heat.
- Product Attributes:
-
- Conductivity Warning: Caution This Material Is Electrically Conductive; Be Sure To Insulate Any Terminals That Might Come In Contact With This Product.
- Install Tips: Hook & Loop Seam
- Instructions Included: No
- Insulation Type: Radiant Heat Barrier, Needs 1 Inch Of Air Space, Should Not Contact Heat Source.
- Manufacturer Product Link: Https://www.heatshieldproducts.com/cold-gold-sleeve
- Material: Proprietary Aluminized Fiberglass
- Operating Temperature: 1100f
- Peak Temperature: 2000f
- Product Dimensions: 1/2 In Id X 3 Ft H&l Seam
- Prop 65 - Short Label: Prop 2065ca.pdf
- Prop 65 (C, R or CR): Cr
- Prop 65 Warning Chemical Listing: Warning: This Product Can Expose You To Lead, A Chemical Known To The State Of California To Cause Cancer And/or Birth Defects Or Other Reproductive Harm. Www.p65warnings.ca.gov
- Safety Equipment Warning: Always Wear Safety Glasses, Dust Mask, Gloves And Long Sleeves Are Recommended When Handling This Product.
-
Features:
- Continuous operating reflective temperature of 1100F, 2000F intermittent
- Capable of reducing up to 90 percent of radiant heat
- Helps to prevent vapor lock, lower air intake temperatures, protects wires from melting
- hook & loop allows installation without component assembly
- a 3 foot length our Cold Gold Sleeve weighs less than 6 inches of the old silicone covered stuff of the same diameter. Though it weighs much less, it offers superior radiant heat protection. Cold Gold Sleeve withstands 1100F of continuous radiant heat and 500F direct heat.
Brand: Heatshield Products
