Finish Selecting Your Vehicle

Choose your Submodel for your 1996 Chrysler Sebring

  • LX

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Mapco
    Mapco

Showing Products For 1996 Chrysler Sebring Power Steering Pump

Below are all the different brands and applications for 1996 Chrysler Sebring Power Steering Pump

Showing 1 - 5 of 5 Products for Power Steering Pump.

Refine Your Search

BBB Industries
1996 Chrysler Sebring Power Steering Pump 4 Cyl 2.0L BBB Industries - Reman Power Steering Pump

P311-1495F99    920-0135  Remanufactured

19318874

Qty:
In Stock & Ready to Ship
$8.00 $91.25
BBB Industries Power Steering Pump
  • ; w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Pipe
    • Inlet Quantity: 1
    • Inlet Thread Size: M8x1.25
    • Installation Kit Included: Yes
    • Outlet Attachment Type: Threaded
    • Outlet Quantity: 1
    • Outlet Thread Size: M16x1.50
    • Prop 65 Warning: Warning: Cancer And Reproductive Harm
    • Pulley Attachment Type: Spline
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Body Block Engine CID CC
1996 - Chrysler Sebring Coupe L 4 Cyl 2.0L 122 1996
Mapco
1996 Chrysler Sebring Power Steering Pump 4 Cyl 2.0L Mapco

P311-40D6162    96194M  Remanufactured

21-5934 , 5252 , MB910655

Qty:
In Stock & Ready to Ship
$25.00 $118.17
  • POWER STEERING PUMP
  • ; Pump is equipped with a sensor that needs to be transferred from the original pump to the replacement pump. If this sensor and components are not transferred correctly, the shaft seal my fail as a result of high pressure. Pulley needs to be transferred with proper pulley removal/install toll. If o'ring between the pump and reservoir not replaced, noise and leakage will occur. In addition, reservoir screen needs to be free of all contaminants.
Brand: Mapco
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1996 - Chrysler Sebring LX L 4 Cyl 2.0L 122 1996
Cardone
1996 Chrysler Sebring Power Steering Pump Cardone - Power Steering Pump

P311-37B2B83    21-5998  Remanufactured

4656034 , 4656062

Qty:
In Stock & Ready to Ship
$55.80 $65.15
Cardone Power Steering Pump
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Reservoir Not Included
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • First Application Year: 1996
    • Hose Port Type: Seat
    • Mounting Hardware Included: No
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Power Steering Pump Outlet Quantity: 1
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Body
1996 - Chrysler Sebring Convertible
Cardone
1996 Chrysler Sebring Power Steering Pump 4 Cyl 2.0L Cardone - Power Steering Pump

P311-53D1A71    21-5934  Remanufactured

MB910655 , MB911572 , MR910655

Qty:
In Stock & Ready to Ship
$31.50 $91.62
Cardone Power Steering Pump
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Reservoir Not Included
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • First Application Year: 1995
    • Hose Port Type: Seat
    • Mounting Hardware Included: No
    • Power Steering Outlet Thread Size: M16 X 1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Power Steering Pump Outlet Quantity: 1
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Body Block Engine CID CC
1996 - Chrysler Sebring Coupe L 4 Cyl 2.0L 122 1996
Cardone
1996 Chrysler Sebring Power Steering Pump 6 Cyl 2.5L Cardone - Power Steering Pump

P311-1087244    21-5025  Remanufactured

MB911555 , MR197063

Qty:
In Stock & Ready to Ship
$3.60 $94.17
Cardone Power Steering Pump
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system Reservoir Not Included
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • First Application Year: 1995
    • Hose Port Type: O-ring
    • Mounting Hardware Included: No
    • Power Steering Outlet Thread Size: M12 X 1.25
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Hose Barb
    • Power Steering Pump Outlet Quantity: 1
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Spline
    • Pulley Included: No
    • Remote Reservoir: Yes
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Body Block Engine CID CC
1996 - Chrysler Sebring Coupe V 6 Cyl 2.5L 152 2497

Showing 1 - 5 of 5 Products for Power Steering Pump.