Finish Selecting Your Vehicle

Choose your Submodel for your 1996 Chevrolet S10

  • SS
  • ZR2

Shop By Brand

The Following brands are available based on your search.

  • AutoBest
    AutoBest
  • Autopart International
    Autopart International
  • Bosch
    Bosch
  • CARQUEST
    CARQUEST
  • Carter
    Carter
  • Delphi
    Delphi
  • Holley
    Holley
  • US Motor Works
    US Motor Works

Showing Products For 1996 Chevrolet S10 Fuel Pump Module Assembly

Below are all the different brands and applications for 1996 Chevrolet S10 Fuel Pump Module Assembly

Showing 1 - 10 of 28 Products for Fuel Pump Module Assembly.

Refine Your Search

Delphi
1996 Chevrolet S10 Fuel Pump Module Assembly 6 Cyl 4.3L Delphi

P311-035BAE5    FG0028  New

19179616 , 19331275 , 1AMFP00200 , 25163487 , 67329 , 953-5016 , 9535016 , A30068 , AFS0527S , E3920M , EFG0028 , EFP811M , MU11 , MU1732 , P363M , P74714M , P74714S , RE0527S , SP363M

Qty:
In Stock & Ready to Ship
$202.78
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 10
    • Average Flow Rating: 18
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 109.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 3
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 0.1
    • Resistance Ohms Full: 90.0
    • Strainer Included: Yes
    • System Pressure: 62 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1996 - Chevrolet S10 W V 6 Cyl 4.3L 262 -
Delphi
1996 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.2L Delphi

P311-4C73C97    FG0027  New

19179984 , 25163486 , 67329 , 67332 , 8-19179-984-0 , 8-25163-486-0 , 8191799840 , 8251634860 , 953-5015 , 9535015 , A30081 , AFS0239S , E16336 , E3923M , EFG0027 , EFP910M , MU10 , MU1781 , P359M , P74717M , P74717S , RE0239S , SP359M

Qty:
In Stock & Ready to Ship
$214.71
Delphi Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
  • Product Attributes:
    • Average Current Draw: 7
    • Fuel Level Sender Assembly Included: Yes
    • Fuel Type: Gas
    • Internal Or External Strainer: Internal
    • Lock Ring Included: No
    • Maximum Pressure: 109.0
    • Outlet Outside Diameter: 0.375
    • Outlet Quantity: 3
    • Pump Type: Electric
    • Regulator Included: No
    • Resistance Ohms Empty: 0.1
    • Resistance Ohms Full: 90.0
    • Strainer Included: Yes
    • System Pressure: 51 Psi
    • Terminal Gender: Male
    • Terminal Quantity: 4
    • Terminal Type: Blade
    • Vapor Pressure Sensor: Yes
    • Voltage: 13.0
  • 100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Brand: Delphi
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1996 - Chevrolet S10 4 L 4 Cyl 2.2L 134 2190
Carter
1996 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.2L Carter

P311-2C8964C    P74717M  New

150068 , 19179984 , 25163486 , 2920029 , 530-2850 , 67332 , 953-5015 , A30081 , AFS0239S , C-0331-M , C0331M , D11111179TG , E3923M , FG0027 , M3246681 , MU1781 , RE0239S , SP359M , TU405 , USEP3923M

Qty:
In Stock & Ready to Ship
$187.68
Carter Fuel Pump Module Assembly
  • Fuel Pump Module Assembly
  • with Turbine Pump Technology; Includes Tank Seal, Connectors, and Wire Harness
  • Product Attributes:
    • Connector Shape: Oval
    • Fuel Filter Included: No
    • Fuel Sending Unit Included: Yes
    • Fuel Tank Pressure Sensor Included: No
    • Grade Type: Regular
    • Internal Or External Strainer: External
    • Lock Ring Included: No
    • Minimum Pressure: 60.0
    • Mounting Hardware Included: No
    • Negative Ground: Yes
    • Outlet Fitting Thread Size: 3/8
    • Pump Type: Electric
    • Regulator Included: No
    • Strainer Included: Yes
    • Terminal Gender: Male
    • Terminal Type: Spade
    • Voltage: 12v
    • Wire Harness Included: Yes
  • The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.
Brand: Carter
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Chevrolet S10 L 4 Cyl 2.2L 134 2190
AutoBest
1996 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.2L AutoBest

P311-11B9F1D    F2934A  New

Qty:
In Stock & Ready to Ship
$81.61
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
  • Product Attributes:
    • Inlet Diameter: 0.748
    • Outlet Diameter: 3/8
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Chevrolet S10 L 4 Cyl 2.2L 134 2190
AutoBest
1996 Chevrolet S10 Fuel Pump Module Assembly 6 Cyl 4.3L AutoBest

P311-39C241C    F2931A  New

Qty:
In Stock & Ready to Ship
$78.56
AutoBest Fuel Pump Module Assembly
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
  • Product Attributes:
    • Inlet Diameter: 0.748
    • Outlet Diameter: 3/8
Brand: AutoBest
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Chevrolet S10 V 6 Cyl 4.3L 262 -
US Motor Works
1996 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.2L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-4648325    USEP3923M  New

Qty:
In Stock & Ready to Ship
$157.22
US Motor Works Fuel Pump Module Assembly
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seal, Wiring Harness Adapter
Brand: US Motor Works
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Chevrolet S10 L 4 Cyl 2.2L 134 2190
US Motor Works
1996 Chevrolet S10 Fuel Pump Module Assembly 6 Cyl 4.3L US Motor Works - ELECTRIC FUEL PUMP MODULE

P311-1CD5B57    USEP3920M  New

Qty:
In Stock & Ready to Ship
$155.42
US Motor Works Fuel Pump Module Assembly
  • ELECTRIC FUEL PUMP MODULE
  • Product Attributes:
    • California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
  • Includes: Tank Seal, Wiring Harness Adapter
Brand: US Motor Works
Additional Fitment Information:
Vehicle Submodel Engine VIN Block Engine CID CC
1996 - Chevrolet S10 ZR2 W V 6 Cyl 4.3L 262 -
Bosch
1996 Chevrolet S10 Fuel Pump Module Assembly 6 Cyl 4.3L Bosch - Fuel Pump Module Assembly (New)

P311-3A71680    67329  New

19179616 , 19331275 , 8191799840

Qty:
In Stock & Ready to Ship
$196.05
  • Bosch Fuel Pump Module Assembly
  • Fuel Pump Module Assembly (New)
  • Product Attributes:
    • Cases Per Pallet (ORLY): 54
    • Electric Or Mechanical: Electric
    • Gaskets Included (Fuel Pump): Yes
    • In-Line Pump: N
    • Mounting Hardware Included: No
    • Negative Ground: No
    • Package Contents: 1 Module Assembly
    • Prefiltro usado con bomba: Yes
    • Prop 65 Warning Label Required?: No
    • Pump Only Or Module: Module
  • Features:
    • Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
    • Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
    • Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
    • Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
    • All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
  • Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.
Brand: Bosch
Additional Fitment Information:
Vehicle Block Engine CID CC
1996 - Chevrolet S10 V 6 Cyl 4.3L 262 -
Holley
Fuel Pump Module Assembly Holley

P311-1236054    12-132  New

Qty:
In Stock & Ready to Ship
$806.53
Holley Fuel Pump Module Assembly
  • In-Tank Retrofit Fuel Module
  • In-Tank Retrofit Fuel Module; 450 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
  • Product Attributes:
    • Diameter (in.): 4.800 In.
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 450
    • Thread Size: 1/4npt
    • WARNING CA Proposition 65: No
  • Features:
    • Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
    • The Low Profile Design For Added Clearance When Needed
    • Clamping System Allows You To Locate Module Anywhere In The Tank
    • 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
    • Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
    • Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
    • 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
  • Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile 5 inch diameter design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Fuel Pump Module Assembly Holley

P311-52782C4    12-147  New

Qty:
In Stock & Ready to Ship
$782.55
Holley Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly
  • Drop In Fuel Pump Module Assembly; Dual Pumps; Free Flow LPH 450; 8AN Inlet/10 AN Outlet; For Use w/12 Bolt Flange Fuel Cells;
  • Product Attributes:
    • Flange Type: 12 Bolt
    • Free Flow GPH: 230
    • Fuel Type:
      • E85
      • Gasoline
    • Fully Open: 900
    • Inlet Size: 8an
    • Maximum PSI: 87
    • Outlet Size: 10an
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Complete Drop-In Fuel Module Assembly
    • Billet Top Flange Housing
    • Pump Depth Is Fully Adjustable For Fitment
  • Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single and dual 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 1750 EFI or 2200 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 28 Products for Fuel Pump Module Assembly.