1996 Buick Riviera Fuel Pump Module Assembly Air and Fuel Delivery - ACDelco, AutoBest, Carter, Delphi, Holley, LKQ, US Motor Works

1996 Buick Riviera Fuel Pump Module Assembly ACDelco

Part # P311-40A49CB Manu # W0133-1938263 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $397.02

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
GM OE Lifetime Warranty

Brand: ACDelco

Vehicle	Aspiration
1996 - Buick Riviera	Naturally Aspirated

1996 Buick Riviera Fuel Pump Module Assembly Delphi

Part # P311-0AB242B Manu # W0133-1938263 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $372.96

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Lifetime Warranty

Brand: Delphi

Vehicle	Aspiration
1996 - Buick Riviera	Naturally Aspirated

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L Delphi

Part # P311-4B0CF60 Manu # FG0008 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19153727 , 25029709 , 25363936 , 43-909 , 67322 , 953-0005 , 953-5007 , A30100 , AFS0413S , DFG0008 , E3912M , EFP909M , MU1625 , P257M , P74690M , P95126E , RE0413 , RE0413S , SP49909M

Qty:

In Stock & Ready to Ship

Best Price: $203.64

Fuel Pump Module Assembly
Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 7
- Average Flow Rating: 23
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 109.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 0.1
- Resistance Ohms Full: 90.0
- Strainer Included: Yes
- System Pressure: 44 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: No
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Aspiration	Engine VIN	Block	Engine	CID	CC
1996 - Buick Riviera	Naturally Aspirated	K	V	6 Cyl 3.8L	231	3800

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L Carter

Part # P311-1C6D8E3 Manu # P74690M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19153727 , 25029709 , 2630326 , 2920040 , 43909 , 530-2860 , 88962474 , 953-0005 , A30100 , AFS0413S , C-0324-M , C0324M , D11111274TG , E3912M , FG0008 , M212877 , MU1625 , RE0413S , SP49909M

Qty:

In Stock & Ready to Ship

Best Price: $154.32

Fuel Pump Module Assembly
with Turbine Pump Technology; Includes Tank Seal and Wire Harness
Product Attributes:
- Connector Shape: Oval
- Fuel Filter Included: No
- Fuel Sending Unit Included: Yes
- Fuel Tank Pressure Sensor Included: No
- Grade Type: Regular
- Internal Or External Strainer: External
- Lock Ring Included: No
- Maximum Pressure: 60.0
- Mounting Hardware Included: No
- Negative Ground: Yes
- Outlet Fitting Thread Size: 3/8
- Pump Type: Electric
- Regulator Included: No
- Strainer Included: Yes
- Terminal Gender: Male
- Terminal Type: Blade
- Voltage: 12v
- Wire Harness Included: No
The Carter Fuel Systems program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Brand: Carter

Vehicle	Aspiration	Block	Engine	CID	CC
1996 - Buick Riviera	Naturally Aspirated	V	6 Cyl 3.8L	231	3800

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L AutoBest

Part # P311-5EACB06 Manu # F2933A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $79.42

Recommend to replace Wiring Harness FW909 Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
Product Attributes:
- Inlet Diameter: 0.27500000000000002
- Outlet Diameter: 0.374

Brand: AutoBest

Vehicle	Aspiration	Block	Engine	CID	CC
1996 - Buick Riviera	Supercharged	V	6 Cyl 3.8L	231	3800

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L AutoBest

Part # P311-5B2B6AE Manu # F2923A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $81.05

Wiring Harness replacement recommended Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal
Product Attributes:
- Inlet Diameter: 0.36199999999999999
- Outlet Diameter: 0.373

Brand: AutoBest

Vehicle	Aspiration	Engine VIN	Block	Engine	CID	CC
1996 - Buick Riviera	Naturally Aspirated	K	V	6 Cyl 3.8L	231	3800

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-07ABDEE Manu # USEP3912M Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $176.92

ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal, Wiring Harness Kit

Brand: US Motor Works

Vehicle	Aspiration	Block	Engine	CID	CC
1996 - Buick Riviera	Naturally Aspirated	V	6 Cyl 3.8L	231	3800

1996 Buick Riviera Fuel Pump Module Assembly 6 Cyl 3.8L Delphi

Part # P311-121FAE0 Manu # FG0031 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19179618 , 25162246 , 67331 , 953-0005 , 953-5019 , 9535019 , A30197 , DFG0031 , E3922M , MU14 , MU1734 , P366M , P74910M , SP6606M

Qty:

In Stock & Ready to Ship

Best Price: $167.79

Fuel Pump Module Assembly
Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 7
- Average Flow Rating: 29
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 109.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 0.1
- Resistance Ohms Full: 90.0
- Strainer Included: Yes
- System Pressure: 51 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: No
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Aspiration	Engine VIN	Block	Engine	CID	CC
1996 - Buick Riviera	Supercharged	1	V	6 Cyl 3.8L	231	3800

Fuel Pump Module Assembly Delphi

Part # P311-1AC5F71 Manu # FG1483 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3924710C1 , EFG1483

Qty:

In Stock & Ready to Ship

Best Price: $255.27

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 10
- Average Flow Rating: 46
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80.0
- Notes: Used On 2012 F64 Navistar
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 54 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Delphi

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-45DB8B4 Manu # 12-173 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $831.85

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 450 LPH; Return Style; Install In Any Tank From 7 in. To 12 in. Deep; Includes Filter Socks;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Billet/Anodized/Laser Etched Flanges With 8An ORB Return/Outlet And 6An Orb Vent
- Allows You To Locate The Module Nearly Anywhere In The Tank While Retaining
- The Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing And Wiring
- Easy Install Just Drill A 4 in. Hole In The Top Of The Tank Then Use Hand Tools
- E85 Compatible
- The Dual Pump Design Allows The Pumps To Be Ran Together Or The Second Pump Can Be Triggered Additionally
- Units Install In Tanks From 7 To 12 in. Deep
- Filter Socks Included/Hydramats Can Be Purchased Separately
Looking to make a serious step up in the horsepower department? The Holley Dual 450 LPH EFI Pump Module would be an excellent choice. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator.The innovative clamping system allows you to locate the module nearly anywhere in the tank while retaining your factory fuel level sending unit. The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1996 Buick Riviera Fuel Pump Module Assembly