1995 Honda Prelude Distributor Ignition - Cardone, Holley, MSD, Pertronix, WAI Global

Distributor MSD

Part # P311-3C912A0 Manu # 8102 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $106.21

Ignition Box Mount
Ignition Box Mount; Dzus Buttons; Sprint Car;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Ignition Box Mount
This Backing Plate Kit is for use with MSD Electronic Points Box PN 8106 or PN 81063MSD only. It is intended for use with thin sheet metal (dash panels). It is NOT for rigid mounting applications.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-26D8648 Manu # 84863 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $501.13

Crank Trigger Distributor
Crank Trigger Distributor; Racing; Low Profile; Super Tall Block; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8; Black;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine:
  - Chevy Big Block
  - Chevy Small Block
- Engine Make/Size:
  - Chevy Big Block
  - Chevy Big Block (396-454)
  - Chevy Small Block
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
- Adj. Slip Collar Mounting Flange For Engines w/Modified Decks
- CNC machined billet aluminum housing and Dupont Rynite base
- Designed to fit low in the block to clear firewall/intake combos
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Oversized Polished Steel Shaft w/QPQ Coating
- Supplied w/Small
- Low Crab Style Dist. Cap/Rotor/Bronze Gear
MSDs Super Tall Crab Cap distributor is taller to fit special racing blocks such as the Allen Root or Rocket blocks. Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires while providing excellent clearance since plug wires exit the side of the cap

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-45424A6 Manu # 8486 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $489.38

Crank Trigger Distributor
Crank Trigger Distributor; Racing; Low Profile; Super Tall Block; Includes Dupont Rynite Molded Crab Style Distributor Cap/Rotor/Bronze Gear; Fits Chevy V8;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Crank Type W/mech. Tach Drive
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed to fit low in the block to clear firewall/intake combos
- Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
- Supplied w/Small
- Low Crab Style Dist. Cap/Rotor/Bronze Gear
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Oversized Polished Steel Shaft w/QPQ Coating
- Adjustable Slip Collar For Engines w/Modified Deck Heights
- CNC machined billet aluminum housing and Dupont Rynite base
- 0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
The super tall crab cap is taller to fit special racing blocks such as the Allen Root or Rocket blocks. The MSD Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-2F7108B Manu # 85603 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $616.77

Marine Distributor
Marine Distributor; Marine UL-Certified; Chevy V8; Iron Gear; Black Anodized;
Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size: Chevy V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Advance weight pins are staked and tig welded to the plate
- Advance plate and weights are fine blanked from chrome moly steel
- Black Anodized For Great Looks And Corrosion Resistance
- CNC machined billet aluminum housing and billet aluminum base
- 2 Flame Arrestor Holes w/Brass Screens
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
- O-ring seals can be installed for oil press. control (Mods only)
- Polished Steel Shaft w/QPQ Coating For Friction Reduction
- Special oil tract improves lubrication to the dist. and cam gear
Boat enthusiast will be glad to see the addition of the new MSD Black Marine distributor line. Built off our tried and true billet marine distributors, the 6061-T6 aluminum housing is now hard anodized with a sleek black finish for great looks. Under the black cap youll find a quality rotor, pickup, reluctor and adjustable weight plate assembly (where applicable). Chevy applications use a .500 QPQ coated distributor shaft joined by a melonized distributor gear while Ford models run a .531 QPQ coated shaft and cast gear. Both ensure smooth operation, superior strength and long life even when challenged by harsh marine applications. The Marine Pro-Billet Distributors have been tested by Underwriters Laboratory and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-21D4172 Manu # 83525 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $697.75

Pro-Billet Distributor
Pro-Billet Distributor; Ready-To-Run; Fits Ford 289/302; 5/8 in. Smaller Diameter Billet Alum. Housing; Maintenance-Free Magnetic Pickup; Includes Black Small Diameter Cap/Race Rotor;
Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size: Ford 289-302
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
- Equipped w/Iron Gear
- Maintenance-free magnetic pickup and precision reluctor
- Housing Is 5/8 in. Smaller Than Stock
- Easy-to-adjust mechanical advance
- Built-In Rev Limiter
- Only Three Wires To Connect For Installation
- Does not require an MSD Ignition Control
- Will accept PN[8441] Cap-A-Dapt
MSDs Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8 smaller in diameter to accommodate induction setups and tight engine compartments. A maintenance-free magnetic pickup is responsible for triggering the high voltage sparks while a sealed ball bearing guides an oversized shaft. Beneath the bolt down cap and MSD race rotor youll find MSDs accurate mechanical advance assembly. Different advance springs and stop bushings are supplied so you can easily tune a curve to match your needs. Plus, there is a vacuum advance canister to increase economy on long drives. For protection, there is also an easy-to-set rev limiter!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-49034DF Manu # 85557 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $418.92

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy V8; Must Be Used w/An MSD Ignition Control; Black;
Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size: Chevy V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
MSDs most popular performance distributor is now available with a black cap that includes 316 Stainless Steel Terminals. The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-56C0971 Manu # 85465 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $565.95

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chrysler 426/440; Must Be Used w/An MSD Ignition Control; Black;
Product Attributes:
- Distributor Type: Race
- Engine Make/Size:
  - Mopar 426
  - Mopar 440
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-3414CF8 Manu # 8520 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $1,063.41

Pro-Billet™ Front Drive Distributor
Pro-Billet™ Front Drive Distributor; w/Standard Size Ford Style Distributor Cap/Rotor; Includes Belt/Cam Pulley; Chevy Big Block;
Product Attributes:
- Distributor Type: Front Drive
- Engine Make/Size: Chevy Big Block (396-502)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Band clamp mount allows easy rotor phasing adjustment
- The Only Front Drive Distributor w/Adjustable Belt Tension
- Cap and Rotor are injection molded from DuPont Rynite material
- Billet aluminum bracket and lower housing for strength
- Supplied w/Cam Gear
- Hardware And Extra Wide 9mm Belt
MSDs Pro-Billet Front Drive distributor is the solution for race engines that dont have room for a standard distributor due to firewall clearance or intake combinations. The MSD Front Drive distributor is belt-driven from a pulley installed on the camshaft. For increased strength and durability a 9mm belt is used which is wider than any other drive assembly. The distributor head is CNC-machined from a billet of aluminum and is secured to a strong precision bracket. This system is an extremely accurate way to distribute the spark energy from your MSD Ignition! We revised the front drive with our standard Ford-style cap and rotor. This creates a downsized package for an easier fit in tight engine compartments. The Front Drive distributor is supplied with mounting bolts, cam pulley and drive belt. Note: Must be used with a Jesel or Comp Cams Camshaft Belt Drive Kit and an MSD Flying Magnet Crank Trigger.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-2E2AC50 Manu # 85211 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $398.82

Cam Sync Plug
Cam Sync Plug; Ford 351C-460; CNC Billet Housing w/Black Anodized Cap; Plug-N-Play; Built-In L.E.D.; Supplied w/Bronze Distributor Gear;
Product Attributes:
- Distributor Gear: Bronze
- Distributor Type: Cam Sync Plug
- Engine Make/Size: Ford Big Block 351c-460
- Sensor Type: Hall Effect
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Built-In LED Makes Set-Up And Indexing Quick And Easy
- Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
- CNC Billet Housing w/Black Anodized Cap
- Plug-N-Play w/Holley EFI
- Supplied w/Bronze Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-3344A37 Manu # 85141 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $337.38

Cam Sync Plug
Cam Sync Plug; Chevy Small/Big Block; CNC Billet Housing w/Black Anodized Cap; Plug-N-Play; Built-In L.E.D.; Supplied w/Cast Melonized Distributor Gear And Adj. Slip Collar;
Product Attributes:
- Distributor Gear: Cast Melonize
- Distributor Type: Cam Sync Plug
- Engine Make/Size: Chevy Small And Big Block
- Sensor Type: Hall Effect
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Built-In LED Makes Set-Up And Indexing Quick And Easy
- CNC Billet Housing w/Black Anodized Cap
- Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
- Plug-N-Play w/Holley EFI
- Supplied w/Steel Distributor Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems. The cam sync plug will have 3/4 of adjustment.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1995 Honda Prelude Distributor