802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 1994 GMC C3500

  • 8 Cyl 5.7L
  • 8 Cyl 6.5L
  • 8 Cyl 7.4L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone

Showing Products For 1994 GMC C3500 Power Steering Pump

Below are all the different brands and applications for 1994 GMC C3500 Power Steering Pump

Showing 1 - 10 of 10 Products for Power Steering Pump.

Refine Your Search

Cardone
1994 GMC C3500 Power Steering Pump 8 Cyl 7.4L Cardone - New Power Steering Pump

P311-2319DF6    96-8735  New

26020027 , 26037446 , 26042880 , 26015765 , 26037453 , 26020026 , 26028558 , 26037447 , 26037454 , 26020025 , 26028090 , 26028091

Qty:
$131.14
Cardone Power Steering Pump
  • New Power Steering Pump w/Reservoir
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/Reservoir
  • New Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Units Are Supplied With Reservoir And Cap (when Applicable) To Reduce Installation Time And Prevent Contamination From Trapped Debris.
    • Package Contents: Pump, Reservoir, O-ring Kit, Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Reservoir
    • Product Condition: New
    • Pulley Attachement Type: Press-on
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 7.4L 454 -
Cardone
1994 GMC C3500 Power Steering Pump 8 Cyl 6.5L Cardone - New Power Steering Pump

P311-2319DF6    96-8735  New

26020027 , 26037446 , 26042880 , 26015765 , 26037453 , 26020026 , 26028558 , 26037447 , 26037454 , 26020025 , 26028090 , 26028091

Qty:
$131.14
Cardone Power Steering Pump
  • New Power Steering Pump w/Reservoir
  • without Ambulance Package In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/Reservoir
  • New Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Units Are Supplied With Reservoir And Cap (when Applicable) To Reduce Installation Time And Prevent Contamination From Trapped Debris.
    • Package Contents: Pump, Reservoir, O-ring Kit, Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Reservoir
    • Product Condition: New
    • Pulley Attachement Type: Press-on
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 6.5L 395 -
Cardone
1994 GMC C3500 Power Steering Pump Cardone - Reman. Power Steering Pump

P311-5D12944    20-860  Remanufactured

26003870 , 52039145 , 15234826 , E3UZ3A674A , 7839809 , 26019736 , 26019743 , 26020780 , 26010183 , 26019744 , 7838888 , 7839818 , 26019739 , 7838936 , 26037450 , 26022617 , 15909822 , 7840996 , 7839810 , 26037446 , 7839814 , 26039903 , 15267673 , 7839801 , 26010182 , 15267675 , 7838933 , 7841430 , 15909824 , 26020024 , 26048827 , 15095941 , 26019740 , 88963604 , 26014111 , 26042247 , 26020026 , 7839800 , 15078157 , 26069033 , 26003927 , 26020779 , 26019738 , 26040781 , 52037606 , 26041538 , 15076613 , 26045343 , 26074333 , 26027974 , 26037453 , 26020021 , 26037447 , 7840512 , 26025310 , 15909826 , 26069038 , 7839798 , 20756712 , 26028090 , 26042593 , 26021139 , 7839805 , 26019737 , 26069035 , 52039042 , 26019746 , 15054906 , 26022616 , 88963603 , 26008896 , 26081015 , 26020027 , 26025305 , 26048826 , 26026916 , 52037568 , 26015765 , 7842491 , 7838863 , FOUZ3A674A , 26066455 , 26001536 , 15054905 , 7838935 , 53002714 , 26037454 , 20756714 , 26057289 , 26068204 , 26008898 , 7839802 , 26020028 , 26020022 , 26022229 , 6003042 , 26021138 , 7839821 , 26028558 , 26019742 , 52039145AB , 7839804 , 7839789 , 53003903 , 7839806 , 26014075 , 26069031 , 26020025 , 26057293 , 26043562 , 26061018 , 26003872 , 15076612 , 7839816 , 26065829 , 7839807 , 52039173 , 7838934 , 7842049 , 26003926 , 26037444 , 7839813 , 7839797 , 26037448 , 26015768 , 7837232 , 52039042AB , 7839799 , J3237193 , 7842489 , 26015769 , 26039901 , 26065848 , 26042592 , E2UZ3A674A , 7839808 , 26069070 , 7842033 , 26006945 , 88963606 , 26028091 , 7841731 , 15754215 , 26025313 , 26069075 , 26001944 , 7842032 , 26038104 , 26015763 , 26019745 , 26002570 , 26056604 , F0UZ3A674A , 26019741 , 26035202

Qty:
$24.30 $33.26
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/o Reservoir
  • In-Line filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/o Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Electronic Components Functionally Tested And Replaced, Where Needed
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Brush Assembly Tolerance Specs Validated Or Replaced With New Components, If Necessary
      • Direct Fit Replacement
      • Every Pump Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (2), Seal (6), Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle
1994 - GMC C3500
Cardone
1994 GMC C3500 Power Steering Pump 8 Cyl 7.4L Cardone - Reman. Power Steering Pump

P311-4C25FDC    20-8735  Remanufactured

26015765 , 26037453 , 26037447 , 26020027 , 26020026 , 26028090 , 26028558 , 26037454 , 26042880 , 26028091 , 26037446 , 26020025

Qty:
$22.50 $44.21
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/Reservoir
  • In-Line filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Direct Fit Replacement
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (2), Reservoir, Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 7.4L 454 -
Cardone
1994 GMC C3500 Power Steering Pump 8 Cyl 5.7L Cardone - Reman. Power Steering Pump

P311-18848F8    20-8733  Remanufactured

26025310 , 26015769 , 26020022 , 26020028 , 26037450 , 26025313

Qty:
$22.50 $44.21
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/Reservoir
  • In-Line filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (2), Reservoir, Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 5.7L 350 -
Cardone
1994 GMC C3500 Power Steering Pump 8 Cyl 6.5L Cardone - Reman. Power Steering Pump

P311-4C25FDC    20-8735  Remanufactured

26015765 , 26037453 , 26037447 , 26020027 , 26020026 , 26028090 , 26028558 , 26037454 , 26042880 , 26028091 , 26037446 , 26020025

Qty:
$22.50 $44.21
Cardone Power Steering Pump
  • Remanufactured Power Steering Pump w/Reservoir
  • without Ambulance Package In-Line filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system ; Supplied w/Reservoir
  • Reman. Power Steering Pump
  • Product Attributes:
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • 100% New Armatures
      • 100% Tested Using Cardone Road Simulation Technology
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Direct Fit Replacement
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Package Contents: Pump, O-ring (2), Reservoir, Instruction Sheet
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
  • CARDONE® Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 6.5L 395 -
BBB Industries
1994 GMC C3500 Power Steering Pump 8 Cyl 7.4L BBB Industries - Reman Power Steering Pump

P311-4BDF67F    731-0125  New

Qty:
$14.00 $35.56
BBB Industries Power Steering Pump
  • ; w/o Reservoir
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 7.4L 454 -
BBB Industries
1994 GMC C3500 Power Steering Pump 8 Cyl 6.5L BBB Industries - Reman Power Steering Pump

P311-13FE583    731-2247  New

Qty:
$25.00 $49.35
BBB Industries Power Steering Pump
  • ; with Reservoir; ** Reservoir Units Are Recommended Replacement ** Excludes Ambulance Package (YF2)
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 6.5L 395 -
BBB Industries
1994 GMC C3500 Power Steering Pump 8 Cyl 7.4L BBB Industries - Reman Power Steering Pump

P311-13FE583    731-2247  New

Qty:
$25.00 $49.35
BBB Industries Power Steering Pump
  • ; with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • Reman Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 7.4L 454 -
BBB Industries
1994 GMC C3500 Power Steering Pump 8 Cyl 7.4L BBB Industries - New Power Steering Pump

P311-5587A35    N731-0125  New

Qty:
$129.72
BBB Industries Power Steering Pump
  • ; w/o Reservoir
  • New Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Block Engine CID CC
1994 - GMC C3500 V 8 Cyl 7.4L 454 -

Showing 1 - 10 of 10 Products for Power Steering Pump.