1994 Chevrolet K1500 Suburban Engine Valve Spring Engine - COMP Cams, Edelbrock, Manley

1994 Chevrolet K1500 Suburban Engine Valve Spring - Intake 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-279D5F8 Manu # 5703 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $86.25

High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.880 In.
- Installed Height: 1.700 In.
- Installed Pressure: 110 Lbs.
- Open Height: 1.700 In.
- Outside Diameter: 1.265 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 285
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5703 Sure Seat Valve Spring for S/B Chevy O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Brand: Edelbrock

Position: Intake

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Intake	V	8 Cyl 5.7L	350	-

1994 Chevrolet K1500 Suburban Engine Valve Spring - Exhaust 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-279D5F8 Manu # 5703 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $86.25

High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads
Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.880 In.
- Installed Height: 1.700 In.
- Installed Pressure: 110 Lbs.
- Open Height: 1.700 In.
- Outside Diameter: 1.265 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 285
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5703 Sure Seat Valve Spring for S/B Chevy O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Brand: Edelbrock

Position: Exhaust

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Exhaust	V	8 Cyl 5.7L	350	-

Engine Valve Spring Manley

Part # P311-5672ED4 Manu # 221448-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $54.37

Manley Valve Spring, SPRING-1.677 TRIPLE
Manley Valve Spring, SPRING-1.677 TRIPLE.
Product Attributes:
- Average Gram Weight: 196
- Category Hierarchy: Valve Springs & Kits>nextek
- Engine Type: Ice
- Industry: Automotive
- Installed Pressure and Height: 350 @ 2.100
- Open Pressure and Height: 1010 @ 1.200
- Out of Stock Message: Call For Availability
- Product Market: Domestic
- Product Type: Engine Valve Spring
- Prop 65 - Short Label: Prop 65 Warning Label.jpg
- Prop 65 (C, R or CR): Cr
- Title: Manley Valve Spring, Spring-1.677 Triple
- Title - Web: Manley Valve Spring, Spring-1.677 Triple
- Valve Lift - Maximum: 0.900
- Valve Spring Coil Bind Height: 1.142
- Valve Spring Inner Diameter: 0.635
- Valve Spring Material: Chrome Silicon
- Valve Spring Outer Diameter: 1.677
- Valve Spring Quantity: 1
- Valve Spring Rate: 733
- Valve Spring Series: Nextek? Series
- Valve Spring Type: Triple

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Manley

Vehicle

Engine Valve Spring COMP Cams

Part # P311-0E70EE0 Manu # 947-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $54.12

1 Spring
Engine Valve Spring
Product Attributes:
- Amazon ASIN: B00062yh7y
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: Yes
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: No Impact On Pollution Output Of Vehicle.
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Coil Bind Height: 1.145
- Compatible .570" Guide Diameter Spring Seats: 4786-1
- Compatible Retainer: 739-1
- Compatible Shims: 4756
- Compatible Spring Cup (O.D. Locator): 4708-1
- Damper: No
- Inner Spring Inside Diameter: 0.863/0.627
- Number of Springs: 3
- Outer Spring Inside Diameter: 1.196
- Outer Spring Outside Diameter: 1.66
- Seat Height: 2.05
- Seat Pressure: 304
- Spring Rate: 681
- Title: Race Extreme 1.660" Od Triple Spring; 2.050" Installed Height; 1 Spring
- Valve Spring Series: Race Extreme
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

Engine Valve Spring COMP Cams

Part # P311-3C22425 Manu # 986-1 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $36.60

Engine Valve Spring
Product Attributes:
- Amazon ASIN: B00062z9ty
- C.A.R.B. E.O. Number: N/a
- C.A.R.B. Exempt for California Certified Vehicles Manufactured Before 1965?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: Yes, But Must Meet Tailpipe Emission Standards For Year Of Vehicle.
- C.A.R.B. Exempt for On-Road Vehicles?: Yes
- C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: Yes, But Must Be A Race/competition Only Vehicle.
- C.A.R.B. Exemption Reason: No Impact On Pollution Output Of Vehicle.
- California Proposition 65: Warning: Cancer And Reproductive Harm P65warnings.ca.gov
- Coil Bind Height: 1.15
- Compatible Retainer: 740-1
- Compatible Shims: 4754
- Compatible Spring Cup (O.D. Locator): 4704-1
- Damper: Yes
- Inner Spring Inside Diameter: 0.697
- Number of Springs: 2
- Outer Spring Inside Diameter: 1.07
- Outer Spring Outside Diameter: 1.43
- Seat Height: 1.75
- Seat Pressure: 132
- Spring Rate: 322
- Title: Engine Valve Spring
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: COMP Cams

Vehicle

1994 Chevrolet K1500 Suburban Engine Valve Spring - Intake 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-46F8185 Manu # 5823 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $171.08

Street; Non-Rotator; Seat Press. 210 lbs.; Installed H 1.90 in.; Open Press. 510 lbs. at 0.600 in.; OD 1.540 in.; ID 0.731 in.; Coil Bind 1.170 in. For Use w/Victor Jr. Cyl. Heads
Sure Seat Valve Springs for Cylinder Heads
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.731 In.
- Installed Height: 1.900 In.
- Installed Pressure: 210 Lbs.
- Open Height: 1.900 In.
- Outside Diameter: 1.550 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 508
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5823 replacement mechanical roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Brand: Edelbrock

Position: Intake

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Intake	V	8 Cyl 5.7L	350	-

1994 Chevrolet K1500 Suburban Engine Valve Spring - Exhaust 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-46F8185 Manu # 5823 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $171.08

Street; Non-Rotator; Seat Press. 210 lbs.; Installed H 1.90 in.; Open Press. 510 lbs. at 0.600 in.; OD 1.540 in.; ID 0.731 in.; Coil Bind 1.170 in. For Use w/Victor Jr. Cyl. Heads
Sure Seat Valve Springs for Cylinder Heads
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.731 In.
- Installed Height: 1.900 In.
- Installed Pressure: 210 Lbs.
- Open Height: 1.900 In.
- Outside Diameter: 1.550 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 508
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5823 replacement mechanical roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Brand: Edelbrock

Position: Exhaust

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Exhaust	V	8 Cyl 5.7L	350	-

1994 Chevrolet K1500 Suburban Engine Valve Spring - Intake 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-35D413B Manu # 5802 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $79.05

Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~Use Non-Rotator Springs 5802 w/Stock Rotators
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.875 In.
- Installed Height: 1.700 In.
- Installed Pressure: 80 Lbs.
- Open Height: 1.700 In.
- Outside Diameter: 1.222 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 200
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5802 Sure Seat Valve Spring for Chevy 262-400 V8 1957-95 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Brand: Edelbrock

Position: Intake

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Intake	V	8 Cyl 5.7L	350	-

1994 Chevrolet K1500 Suburban Engine Valve Spring - Exhaust 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-35D413B Manu # 5802 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $79.05

Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~Use Non-Rotator Springs 5802 w/Stock Rotators
Sure Seat Valve Springs for Chevy 262-400 V8 1957-95
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 0.875 In.
- Installed Height: 1.700 In.
- Installed Pressure: 80 Lbs.
- Open Height: 1.700 In.
- Outside Diameter: 1.222 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 200
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5802 Sure Seat Valve Spring for Chevy 262-400 V8 1957-95 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Brand: Edelbrock

Position: Exhaust

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Exhaust	V	8 Cyl 5.7L	350	-

1994 Chevrolet K1500 Suburban Engine Valve Spring - Intake 8 Cyl 5.7L Edelbrock - Sure Seat Valve Spring

Part # P311-2F71F75 Manu # 5767 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $146.11

High-Perf. Street; Non-Rotator; Seat Press. 120 lbs.; Installed H 1.800in.; Open Press. 310 lbs. at 0.580 in.; OD 1.46 in. ID 1.06 in.; Coil Bind 1.130in. Fits 60859/60879/60979/60989/5023/5025/5089/5073 Cyl. Heads~For Use w/E-Street Cyl. Heads~Fits Centerbolt/E-Tec Edelbrock/Edelbrock LT1 61905 Cyl. Heads
Sure Seat Valve Springs for Ford 429/460 V8 1969-1987
Sure Seat Valve Spring
Product Attributes:
- Camshaft Type: Mechanical
- Coil Bind Height: Oem
- Inside Diameter: 1.060 In.
- Installed Height: 1.820 In.
- Installed Pressure: 105 Lbs.
- Open Height: 1.820 In.
- Outside Diameter: 1.460 In.
- Spring Rate (lbs./in.): N/a
- Spring Type: Single
- Tubing Length: 320
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- For Use With Cast-Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
The Edelbrock #5767 Sure Seat Valve Spring for Ford 429/460 V8 1969-1987 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Brand: Edelbrock

Position: Intake

Vehicle	Position	Block	Engine	CID	CC
1994 - Chevrolet K1500 Suburban	Intake	V	8 Cyl 5.7L	350	-

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1994 Chevrolet K1500 Suburban Engine Valve Spring