Finish Selecting Your Vehicle

Choose your Submodel for your 1994 Acura Integra

  • GS-R
  • LS
  • RS

Shop By Brand

The Following brands are available based on your search.

  • ATP
    ATP
  • Centerforce
    Centerforce
  • Exedy
    Exedy
  • Ford Racing
    Ford Racing
  • Hays
    Hays
  • LuK
    LuK
  • PRW
    PRW
  • Pioneer Cable
    Pioneer Cable
  • Sachs
    Sachs
  • Valeo
    Valeo

Showing Products For 1994 Acura Integra Clutch Flywheel

Below are all the different brands and applications for 1994 Acura Integra Clutch Flywheel

Showing 1 - 10 of 25 Products for Clutch Flywheel.

Refine Your Search

Sachs
1994 Acura Integra Clutch Flywheel Sachs

P311-3AB0FBE    W0133-1713496  New

Qty:
In Stock & Ready to Ship
$219.70
Sachs Clutch Flywheel
  • with ring gear. The pilot bearing is serviced separately.
Brand: Sachs
Additional Fitment Information:
Vehicle Submodel Transmission
1994 - Acura Integra RS Manual
Exedy
1994 Acura Integra Clutch Flywheel Exedy

P311-1E5302B    W0133-1599612  New

Qty:
In Stock & Ready to Ship
$1,032.71
Exedy Clutch Flywheel
  • Racing
Brand: Exedy
Additional Fitment Information:
Vehicle Submodel Transmission
1994 - Acura Integra RS Manual
LuK
1994 Acura Integra Clutch Flywheel 4 Cyl 1.8L LuK

P311-498874B    LFW225  New

167402 , 4160045100 , 50-406 , 88225 , NFW2108 , V2617

Qty:
In Stock & Ready to Ship
$61.41
LuK Clutch Flywheel
  • Luk OE Quality Flywheel
  • Product Attributes:
    • Flywheel Cup Depth/Step Height:
      • 0.104
      • 2.65
    • Flywheel Diameter:
      • 22.2
      • 8.74
    • Flywheel Inner Diameter:
      • 14.8
      • 5.827
  • LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
Brand: LuK
Additional Fitment Information:
Vehicle Submodel Engine Designation Block Engine CID CC
1994 - Acura Integra RS B18B1 L 4 Cyl 1.8L - 1834
LuK
1994 Acura Integra Clutch Flywheel LuK

P311-17CDA88    W0133-2188143  New

Qty:
In Stock & Ready to Ship
$108.22
LuK Clutch Flywheel
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: LuK
Additional Fitment Information:
Vehicle Submodel Transmission
1994 - Acura Integra RS Manual
ATP
1994 Acura Integra Clutch Flywheel 4 Cyl 1.8L ATP

P311-5902A98    Z-284  New

167406 , 22100P75005 , 406 , 40958826 , 50406 , FW-377 , FW157 , FW377 , FW9406 , LFW225 , NFW2108 , Z-284

Qty:
In Stock & Ready to Ship
$124.08
ATP Clutch Flywheel
  • ATP Manual Transmission Flywheel
  • Teeth: 112 Outer Diameter: 11.375" From Engine Code #3316471
  • Product Attributes:
    • LineCode: Atp4
    • Pitch Flywheels: N.a.
    • Tooth Quantity: 118
    • Weight Added: N
  • Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Brand: ATP
Additional Fitment Information:
Vehicle Transmission Block Engine CID CC
1994 - Acura Integra Manual L 4 Cyl 1.8L - 1797
Exedy
1994 Acura Integra Clutch Flywheel Exedy - Lightweight Racing Flywheel

P311-110FCAF    HF01  New

Qty:
In Stock & Ready to Ship
$583.84
Exedy Clutch Flywheel
  • 8 Bolt; One Piece Billet Chromoly Steel; 9.5 lb
  • Lightweight Racing Flywheel; 8 Bolt; One Piece Billet Chromoly Steel; 9.5 lb;
  • Lightweight Racing Flywheel
  • Features:
    • Low Weight/Inertia And High Thermal Capacity
    • Made From Solid One Piece Billet Chromalloy Steel
    • Reduces Weight For Better Engine Response
    • Enhances Airflow Which Improves Cooling Of Clutch
    • Ring Gear Teeth Integrated Onto Flywheel
    • Passed Engineering Tests To 15000-18000 RPM
    • Guaranteed Not To Fail To The Said RPM
    • SFI Certified
  • Exedy flywheels combine low weight, low inertia and high thermal capacity. They are designed for lightly tuned racing cars and drag racing, autocross and rally events, as well as street usage. They are made from solid one-piece billet chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance airflow and cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating due to different expansion coefficients of aluminum vs. steel. Exedy steel billet and forged steel flywheels have passed engineering tests to 15,000-18,000 rpm and guaranteed not to fail to the said rpm and are all SFI approved.
Brand: Exedy
Additional Fitment Information:
Vehicle
1994 - Acura Integra
Exedy
1994 Acura Integra Clutch Flywheel Exedy - Lightweight Racing Flywheel

P311-110FCAF    HF01  New

Qty:
In Stock & Ready to Ship
$583.84
  • 8 Bolt; One Piece Billet Chromoly Steel; 9.5 lb
  • Lightweight Racing Flywheel; 8 Bolt; One Piece Billet Chromoly Steel; 9.5 lb;
  • Lightweight Racing Flywheel
  • Features:
    • Low Weight/Inertia And High Thermal Capacity
    • Made From Solid One Piece Billet Chromalloy Steel
    • Reduces Weight For Better Engine Response
    • Enhances Airflow Which Improves Cooling Of Clutch
    • Ring Gear Teeth Integrated Onto Flywheel
    • Passed Engineering Tests To 15000-18000 RPM
    • Guaranteed Not To Fail To The Said RPM
    • SFI Certified
  • Exedy flywheels combine low weight, low inertia and high thermal capacity. They are designed for lightly tuned racing cars and drag racing, autocross and rally events, as well as street usage. They are made from solid one-piece billet chromoly steel or chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response. Most incorporate special design features to enhance airflow and cooling of the clutch. The ring gear teeth are integrated onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and has the possibility of separating due to different expansion coefficients of aluminum vs. steel. Exedy steel billet and forged steel flywheels have passed engineering tests to 15,000-18,000 rpm and guaranteed not to fail to the said rpm and are all SFI approved.
Brand: Exedy
Additional Fitment Information:
Vehicle
1994 - Acura Integra
Pioneer Cable
1994 Acura Integra Clutch Flywheel 4 Cyl 1.8L Pioneer Cable

P311-2529C23    FW-377  New

167406 , 22100P75005 , 406 , 40958826 , 50406 , FW9406 , LFW225 , NFW2108

Qty:
In Stock & Ready to Ship
$137.09
Pioneer Cable Clutch Flywheel
  • Manual Transmission Flywheel
  • Teeth: 112 Outer Diameter: 11.375" From Engine Code #3316471
  • Product Attributes:
    • Outside Diameter: 11.25"
    • Tooth Quantity: 118
  • PIONEER Manual Transmission Flywheels are a high quality replacement part designed to restore OEM levels of performance. Each flywheel is built to the original dimensions, precision machined and balanced to remove runout and vibrations.
Brand: Pioneer Cable
Additional Fitment Information:
Vehicle Transmission Block Engine CID CC
1994 - Acura Integra Manual L 4 Cyl 1.8L - 1797
PRW
Clutch Flywheel PRW

P311-2CF80A0    1645570  New

Qty:
In Stock & Ready to Ship
$324.80
PRW Clutch Flywheel
  • Flywheel
  • Flywheel; Billet Steel; SFI-Spec 1.1; External Balance; 33 Lbs.; 166 Teeth; Removable Weight; 2.75 in. Or 2.50 in. Choke Ring; Fits 64-85 Pontiac 326-455 CID;
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
  • Features:
    • SFI Certified
    • Manufactured From 1045 Billet Steel
    • CAD Engineered And CNC Machined
    • Award Winning Designs Year After Year
  • PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: PRW
Additional Fitment Information:
Vehicle
Centerforce
Clutch Flywheel Centerforce

P311-27AFF8E    700148  New

Qty:
In Stock & Ready to Ship
$374.95
Centerforce Clutch Flywheel
  • Centerforce(R) Flywheels; Steel
  • Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • High Quality Billet Steel
    • Cad/cam Designed And Cnc Machined
    • Precision Balanced
    • No-hassle Bolt-in
    • Domestic And Import Applications
  • Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Centerforce
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 25 Products for Clutch Flywheel.