Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
QPQ coated polished steel shaft
guided by 2 sealed ball bearings
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
Sharing the CNC machining techniques with the rest of the MSD Distributor line, the Olds housing is machined from high quality 6061-T6 aluminum. Adding to thisĀ strength are two sealed ball bearings that guide the 0.500 shaft accurately through 10,000+ rpm. TIG-welded on top of the polished steel shaft is MSDs adjustable mechanical advance assembly. To accurately trigger the ignition, a high-output magnetic pick-up is bolted to the base. This trigger pick-up produces a precise trigger signal. An MSD red cap with brass terminals and Race Rotor are supplied.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Distributor MSD
P311-07D730383506New
Qty:
In Stock & Ready to Ship
$679.16
Pro-Billet Marine Ready-To-Run Distributor
Pro-Billet Marine Ready-To-Run Distributor; Ford 351C-460; Iron Gear; Red;
Product Attributes:
Distributor Type:Ready To Run
Engine Make/Size:Ford Marine 351c-460
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Only three wires to connect for a simple installation
High output module produces quick starts/smooth idle/performance
Accurate/maintenance-free magnetic pick-up never needs adjustment
Easy-to-adjust mech. advance w/supplied springs and stop bushings
No MSD Ignition control required
MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pick-up produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-RunĀ Distributors are a breeze to install. Simply drop it in the engine and connect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and Weathertight wiring harness.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Built-In LED Makes Set-Up And Indexing Quick And Easy
CNC Billet Housing w/Black Anodized Cap
Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
Plug-N-Play w/Holley EFI
Supplied w/Steel Distributor Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Built-In LED Makes Set-Up And Indexing Quick And Easy
CNC Billet Housing w/Black Anodized Cap
Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
Plug-N-Play w/Holley EFI
Supplied w/Steel Distributor Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Distributor MSD
P311-1E96FDB85463New
Qty:
In Stock & Ready to Ship
$505.84
Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chrysler 426/440 Engines; Must Be Used w/6/7/8 Series Ignition; Black;
Product Attributes:
Distributor Type:Hei/breakerless
Engine Make/Size:Chrysler 426
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
CNC machined billet aluminum housing
QPQ coated polished steel shaft
guided by sealed ball bearings
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
CNC machined billet aluminum housing and billet aluminum base
Easy-to-adjust mechanical advance
Supplied w/springs and stop bushings (except locked out versions)
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
Advance weight pins are staked and tig welded to the plate
Nylon pads ensure smooth operation of the advance weights
Mech. advance assem. can lock out for crank trigger/race app.
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Distributor MSD
P311-4887D968594New
Qty:
In Stock & Ready to Ship
$523.58
Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Ford FE; Iron Gear;
Product Attributes:
Distributor Type:Hei/breakerless
Engine Make/Size:Ford Fe
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
CNC Machined Billet Alum. Housing and Billet Alum. Base
Will not accept a vacuum advance or MSD Cap-A-Dapt
Supplied w/An HEI Style Distributor Cap And Rotor
Must Be Used w/An MSD Ignition Control
Mech. advance assem. can be locked out for crank trigger systems
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated polished steel shaft
guided by sealed ball bearings
Maintenance-free magnetic pickup and precision reluctor
Creates stable trigger signals throughout the rpm range
Easy-to-adjust mech. advance w/supplied springs and stop bushings
Racers and nostalgic Ford enthusiasts using the famous Ford FE engine now have access to a distributor that is truly equal to the performance level of their engine. A magnetic pick-up triggers your MSD Ignition Control accurately at any rpm. Above this pick-up the mechanical advance assembly is positioned so it can be adjusted without disassembling the distributor. In addition, the specially ground advance cam is tig-welded to the 9/16 hardened shaft and the weight pins are staked and TIG-welded to the advance plate.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Distributor MSD
P311-3DC585B83873New
Qty:
In Stock & Ready to Ship
$637.40
Ready-To-Run Distributor
Ready-To-Run Distributor; For Use w/Chrysler 426/440; Black;
Product Attributes:
Distributor Type:Ready To Run
Engine Make/Size:Chrysler 426
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Built-in module produces a 7.5 amp single spark through high rpm
Easy-to-adjust mech. advance w/supplied springs and stop bushings
Vacuum advance canister for improved economy (can be locked out)
CNC machined billet aluminum housing and billet aluminum base
The Pro-Billet Ready-to-Run distributor is the perfect upgrade for outdated points distributors or bulky HEIs. Simply install the distributor in the engine, connect three wires to the coil and fire it up! A maintenance-free magnetic pick-up accurately triggers the module. The increased output of the amplifier easily outperforms stock ignitions and will smooth out the engines idle, improve starting and provide a much higher rpm range. The Ready-to-Run features MSDs adjustable mechanical advance which allows you to custom tailor an ignition curve to match your engines needs. There is also a vacuum advance canister to help improve economy. For positive street performance, the Ready-to-Run is the best choice. Includes a separate tach circuit that is ideal to trigger a tach or an aftermarket EFI such as an Atomic EFI system.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
Designed to fit low in the block to clear firewall/intake combos
Must Be Used w/An MSD Crank Trigger And MSD Ignition Control
Supplied w/Small
Low Crab Style Dist. Cap/Rotor/Bronze Gear
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
QPQ coated polished steel shaft
guided by sealed ball bearings
Oversized Polished Steel Shaft w/QPQ Coating
Adjustable Slip Collar For Engines w/Modified Deck Heights
CNC machined billet aluminum housing and Dupont Rynite base
0.500 in. Taller For Extra Tall Chevrolet Based Engine Blocks
The super tall crab cap is taller to fit special racing blocks such as the Allen Root or Rocket blocks. The MSD Crab Cap Distributors are built specifically for racing engines with almost no room for a distributor due to tunnel rams or blowers. The distributor is equipped with a special low-profile crab style distributor cap to allow it to fit in extremely tight areas. The housing features two optional O-rings at the bottom that improve oil control by preventing oil pressure loss. Also, a small oil bleed hole located in the base sprays oil on the distributor and camshaft gears to prevent excessive wear. Since this is a racing distributor, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning this distributor is MSDs own Crab Cap! This cap incorporates spark plug style terminals for a better connection and grip to the plug wires.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: MSD
Additional Fitment Information:
Vehicle
Distributor MSD
P311-49034DF85557New
Qty:
In Stock & Ready to Ship
$416.77
Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy V8; Must Be Used w/An MSD Ignition Control; Black;
Product Attributes:
Distributor Type:Magnetic Pickup
Engine Make/Size:Chevy V8
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
CNC machined billet aluminum housing
MSDs most popular performance distributor is now available with a black cap that includes 316 Stainless Steel Terminals. The housing is machined from a billet of 6061-T6 aluminum on a state-of-the-art CNC machine producing exact tolerances. For high rpm stability, a .500 steel shaft is supported by a sealed ball bearing and a long sintered bushing. This shaft also receives a QPQ coating for friction reduction and resistance to corrosion. A precision machined reluctor is attached to the shaft which triggers the magnetic pick-up mounted in the housing. This high output magnetic pick-up is the most accurate way to trigger your ignition. Plus, with no moving parts to wear or adjust, the pick-up is maintenance free! Just above the pick-up is MSDs adjustable mechanical advance assembly. Different springs and stop bushings are supplied so you can tune an advance curve to match your application. Must be used with an MSD 6, 7 or 8-series ignition.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.