1993 Chevrolet S10 Fuel Pump Module Assembly Air and Fuel Delivery

1993 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.5L Delphi

Part # P311-4A465AB Manu # FG0069 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 150010 , 19177259 , 19331270 , 19369940 , 1AMFP00073 , 25175791 , 25178729 , 2630316 , 67349 , 8-19177-259-0 , 8-25175-791-0 , 8-25178-729-0 , 8191772590 , 8251757910 , 8251787290 , 953-0010 , 953-5034 , A30027 , A30038 , AFS0429S , D5331019 , E3943M , EFG0069 , EFP917M , M319674 , MPA30027 , MPA30038 , MU110 , MU1756 , P443M , P74755M , RE0429S , SP443M

Qty:

In Stock & Ready to Ship

Best Price: $332.99

Fuel Pump Module Assembly
Except RFI Filter Stamped GAV with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector ; To be used only when failed fuel module cover contains a 3-pin black pressure sensor Fuel tank contamination is the leading cause of premature fuel pump failure. To reduce risk of contaminating the replacement pump, Delphi recommends cleaning the fuel tank before installing a new pump. Use of fuel tank cleaning kit FC01 is recommended.
Product Attributes:
- Average Current Draw: 7
- Average Flow Rating: 18
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 109.0
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 3
- Pump Type: Electric
- Regulator Included: No
- Resistance Ohms Empty: 40.0
- Resistance Ohms Full: 250.0
- Strainer Included: Yes
- System Pressure: 51 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Brand: Delphi

Vehicle	Block	Engine	CID	CC
1993 - Chevrolet S10	L	4 Cyl 2.5L	151	2474

1993 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.5L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-4A01777 Manu # USEP3642S Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $184.04

20 gallon fuel tank
ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal, Lock Ring

Brand: US Motor Works

Vehicle	Block	Engine	CID	CC
1993 - Chevrolet S10	L	4 Cyl 2.5L	151	2474

1993 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.5L US Motor Works - ELECTRIC FUEL PUMP MODULE

Part # P311-1FE6791 Manu # USEP3648S Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $239.71

13 Gallon Fuel Tank
ELECTRIC FUEL PUMP MODULE
Product Attributes:
- California Proposition 65: Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer & Reproductive Harm.
Includes: Tank Seal

Brand: US Motor Works

Vehicle	Block	Engine	CID	CC
1993 - Chevrolet S10	L	4 Cyl 2.5L	151	2474

Bosch

1993 Chevrolet S10 Fuel Pump Module Assembly 4 Cyl 2.5L Bosch - Fuel Pump Module Assembly (New)

Part # P311-3EE347C Manu # 67349 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 19177259 , 19331270 , 8191772590

Qty:

In Stock & Ready to Ship

Best Price: $215.91

Click Here to View Product Images

Bosch Fuel Pump Module Assembly
Fuel Pump Module Assembly (New)
Product Attributes:
- Cases Per Pallet (ORLY): 75
- Electric Or Mechanical: Electric
- Gaskets Included (Fuel Pump): Yes
- In-Line Pump: N
- Mounting Hardware Included: No
- Negative Ground: No
- Package Contents: 1 Module Assembly
- Prefiltro usado con bomba: Yes
- Prop 65 Warning Label Required?: No
- Pump Only Or Module: Module
Features:
- Bosch "Better than OE design", improves upon ease of installation, drivability of your vehicle and extends the life of the vehicle
- Bosch Aftermarket Fuel Assemblies are built and tested to the same rigorous quality standards as our OE fuel pumps to ensure a long, reliable service life
- Patented Turbine Pump technology virtually eliminates fuel pulsation, noise, and reduces hot-start problems
- Designed to operate under extreme temperatures and under low fuel conditions while maintaining an extended service life
- All Bosch fuel pumps are ‘end-of-line’ function tested in order to ensure highest quality and performance of all pumps in our program.
Nuestro equipo de ingenieros de Bosch lleva los beneficios de las bombas de combustible premium al mercado de repuestos automotrices. Las bombas de combustible Bosch se fabrican en las mismas líneas de producción y luego se fabrican y luego se prueban con los mismos estándares de calidad rigurosos que las bombas de combustible Bosch de equipo original para garantizar una vida útil prolongada y confiable. Haga el trabajo bien la primera vez, siempre, con las bombas de combustible Bosch Premium.

Brand: Bosch

Vehicle	Block	Engine	CID	CC
1993 - Chevrolet S10	L	4 Cyl 2.5L	151	2474

Fuel Pump Module Assembly Delphi

Part # P311-1AC5F71 Manu # FG1483 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 3924710C1 , EFG1483

Qty:

In Stock & Ready to Ship

Best Price: $255.27

Fuel Pump Module Assembly
Product Attributes:
- Average Current Draw: 10
- Average Flow Rating: 46
- Fuel Level Sender Assembly Included: Yes
- Fuel Type: Gas
- Internal Or External Strainer: Internal
- Lock Ring Included: No
- Maximum Pressure: 80.0
- Notes: Used On 2012 F64 Navistar
- Outlet Outside Diameter: 0.375
- Outlet Quantity: 2
- Pump Type: Electric
- Regulator Included: Yes
- Resistance Ohms Empty: 180.0
- Resistance Ohms Full: 10.0
- Strainer Included: Yes
- System Pressure: 54 Psi
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Blade
- Vapor Pressure Sensor: Yes
- Voltage: 13.0
100 years of OE experience, supplier to the world's top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Delphi

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-45DB8B4 Manu # 12-173 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $831.85

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 450 LPH; Return Style; Install In Any Tank From 7 in. To 12 in. Deep; Includes Filter Socks;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Billet/Anodized/Laser Etched Flanges With 8An ORB Return/Outlet And 6An Orb Vent
- Allows You To Locate The Module Nearly Anywhere In The Tank While Retaining
- The Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing And Wiring
- Easy Install Just Drill A 4 in. Hole In The Top Of The Tank Then Use Hand Tools
- E85 Compatible
- The Dual Pump Design Allows The Pumps To Be Ran Together Or The Second Pump Can Be Triggered Additionally
- Units Install In Tanks From 7 To 12 in. Deep
- Filter Socks Included/Hydramats Can Be Purchased Separately
Looking to make a serious step up in the horsepower department? The Holley Dual 450 LPH EFI Pump Module would be an excellent choice. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator.The innovative clamping system allows you to locate the module nearly anywhere in the tank while retaining your factory fuel level sending unit. The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-5E83093 Manu # 12-146 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $639.51

Fuel Cell EFI Pump Module Assembly
Fuel Cell EFI Pump Module Assembly; 12 Bolt Flange; 450 LPH Drop-In Module; 8AN Inlet/10AN Outlet;
Product Attributes:
- Flange Type: 12 Bolt
- Free Flow GPH: 118
- Fuel Type:
  - E85
  - Gasoline
- Fully Open: 450
- Inlet Size: 8an
- Maximum PSI: 87
- Outlet Size: 10an
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Update Your Fuel Cell To EFI The Easy Way
- Designed To Drop Right In Your Existing 6/12 Bolt Flange
- Billet Top Flange Housing
- Pump Depth Fully Adjustable For Fitment Into Most Fuel Cells
Updating your racing fuel system to EFI is so simple! Holley is excited to introduce our Holley Fuel Cell EFI Pump Modules. While the name includes EFI, these modules can be used as an upgrade for carbureted systems as well with the proper regulator. The modules were designed to drop in as a direct replacement for your existing 12 bolt flange fuel cell cap assembly. The billet top flange includes an 8AN inlet port, a 10AN outlet port, and a fuel filler cap. The fuel pump depth is fully adjustable from 7.5 in. to 12 in. deep. The EFI modules are available with single 255 LPH and 450 LPH fuel pumps. The module kits include all the hardware to install into your existing fuel cell. All that you need to add is your fuel line.***Assembly fits common RJS, Jaz, Summit, Jegs, RCI, Speedmaster and Speedway fuel cells.***Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-059CCA6 Manu # 19-360 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $521.63

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 340 LPH; Returnless; Install In Any Tank From 7 in. to 12 in. Deep;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- The Easiest Way To Convert Your Vehicle To An In-tank EFI Fuel System
- Your Factory Fuel Level Sending Unit
- The Low Profile 5 Inch Diameter Design Is Only 1.275 Inches Thick Above The Tank Mounting Surface
- The Innovative Clamping System Allows You To Locate The Module Anywhere In The Tank
- Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing
- Die Cast Aluminum Construction For Corrosion Resistance And Long Lasting Good Looks
Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design thats perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the 5 inch diameter module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-103AF31 Manu # 19-350 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $451.09

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 340 LPH; Install In Any Tank From 7 in. to 12 in. Deep;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- The Easiest Way To Convert Your Vehicle To An In-tank EFI Fuel System
- Installs In Any Fuel Tank From 7 in. To 12 in. Deep To Fit A Wide Variety Of Applications
- The Low Profile 5 Inch Diameter Design Is Only 1.275 Inches Thick Above The Tank Mounting Surface
- The Innovative Clamping System Allows You To Locate The Module Anywhere In The Tank
- Clamping System Allows You To Rotate The Unit 360 Degrees For Easier Clocking Of The Plumbing
- Die Cast Aluminum Construction For Corrosion Resistance And Long Lasting Good Looks
Holley/MSD is pleased to announce the release of Sniper Diecast Retrofit Fuel Pump Modules, which support up to 700 EFI horsepower or 900 carbureted horsepower and make it easy to affordably upgrade to EFI. Available in return and returnless versions, they convert your factory tank or fuel cell to an in-tank EFI fuel system. They're easy to install with basic hand tools and require no welding or fabrication whatsoever. Sniper Diecast Retrofit Fuel Pump Modules include a diecast pump-hanger bracket to control pump vibration in a low-profile design thats perfect wherever space is at a premium. They fit any fuel-tank depth from 7 to 12 inches and protrude only 1.275-inch above the tank-mounting surface to accommodate numerous applications. You can locate the 5 inch diameter module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power-source/ground and fuel lines. Supports up to 700 EFI or 900 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Pump Module Assembly Holley

Part # P311-3FEFDF7 Manu # 12-130 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $851.97

In-Tank Retrofit Fuel Module
In-Tank Retrofit Fuel Module; 255 LPH; Install In Any Tank From 6.5 in. to 12 in. Deep;
Product Attributes:
- Diameter (in.): 4.800 In.
- Fully Open: 255
- Thread Size: 1/4npt
- WARNING CA Proposition 65: No
Features:
- Easiest Way To Convert Vehicle To An In-Tank EFI Fuel System
- The Low Profile Design For Added Clearance When Needed
- Clamping System Allows You To Locate Module Anywhere In The Tank
- 360 Degree Rotation Clamping Easy Clocking Of Plumbing/Wiring
- Hydramat w/Consistent Fuel Supply/6 Clocking Pin/360 Deg. Adjust
- Black Aluminum For Corrosion Resistance/Long Lasting Good Looks
- 1/4in. Npt Ports For A Wide Variety Of Plumbing Options
Are you interested in an EFI retrofit kit, but just cant get past the complication of the fuel system? Holley is proud to introduce their Universal In-Tank Retrofit Fuel Modules! Available in return and returnless versions, you can rest assured Holley has the solution you need for your EFI fuel pump woes. Now you can convert your factory tank or fuel cell to an in-tank EFI fuel system quickly and easily! And- add the benefits of a Holley Hydramat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The billet aluminum module design includes a billet pump hanger bracket to control pump vibration while also providing a low profile design to fit where space is at a premium. Holleys innovative clamping system and integrated fuel pump makes it easy. Once installed, hook up your fuel lines and your power source/ground and youre off and running! NO hassle! Supports up to 550 EFI or 700 Carb HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Of course there are many variables, estimates are based on gasoline. Individual systems will vary based on fuel system design, regulator type, fuel cell location, etc...

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1993 Chevrolet S10 Fuel Pump Module Assembly