This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Chrome - 8 per Engine
Chrome
Brand: Genuine
Additional Fitment Information:
Vehicle
1993 - Acura Legend
Engine Valve Cover Nut Proform
P311-32C9467141-909New
Qty:
In Stock & Ready to Ship
$36.09
Engine Valve Cover Mini Nuts; Steel; Red; Bowtie Logo; Studs Included; 4 Pc
Engine Valve Cover Mini Nuts; Chrome Finish With Red Bowtie Logo; Made From Quality Steel; Hex Head With 1/4-20 Thread 1.500 In. Studs Included; Washers Sold Separately; Officially Licensed GM Product; Sold As One Set Of Four Pieces
Product Attributes:
Category:Mini Nuts
Emblem:Chevy Bowtie Emblem
Feature/Benefit:These Custom Valve Cover Mini Nuts Feature A Bowtie Logo On The Top Of Each Fastener.
Length:1 3/8 Inch
Part Type:Valve Cover Mini Nuts
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Pbb / Bbp
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Stud Length:1.75 Inch
Thread Size:1-1/4-inch-20 Thread
These custom valve cover mini nuts feature a Bowtie logo on the top of each fastener. Separate studs are included for precise gasket positioning. The wing nuts fit Chevrolet Big-Block, Small-Block, and V6 cylinder heads. Sold 4 per package.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Engine Valve Cover Wing Nuts; Black Crinkle Finish With Blue Mopar Logo; Made From Steel; 4.25 Inches Tall With 1/4-20 Thread 1.00 Inch Studs Included; Washers Sold Separately; Officially Licensed Mopar Part; Sold As One Set Of Four Pieces
Product Attributes:
Category:Wing Nuts
Emblem:Mopar Emblem
Feature/Benefit:Threaded Studs Are Included With These Wing Nuts.
Length:4 1/8 Inch
Part Type:Valve Cover Wing Nuts
Stud Length:1.5 Inch
Thread Size:1/4in X 20 Threads
Premium Black Crinkle Wing Nuts. Mopar "M" Emblem is cut sharply into the top of each wing nut then inlaid with blue, CED painted for long-term corrosion resistance, and then black crinkle painted on the outer surface.. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution, and each wing nut is supplied with a separate stud which permits precise gasket positioning on the head prior to mounting the valve covers. Fits Chrysler LA, B, and RB Engines. 1/4in x 20 threads. 4 per package
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Engine Valve Cover Wing Nuts; Black Crinkle Finish With Red Bowtie Logo; Made From Steel; 4.25 Inches Tall With 1/4-20 Thread 1.00 Inch Studs Included; Washers Sold Separately; Officially Licensed GM Product; Sold As One Set Of Four Pieces
Product Attributes:
Category:Wing Nuts
Emblem:Chevy Bowtie Emblem
Feature/Benefit:Premium Black Crinkle Wing Nuts.
Length:4 1/8 Inch
Part Type:Valve Cover Wing Nuts
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Pbb / Bbp
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Stud Length:1.5 Inch
Thread Size:1/4in X 20 Threads
Premium Black Crinkle Wing Nuts. Chevrolet Bowtie Emblem is cut sharply into the top of each wing nut then inlaid with classic Chevrolet red, CED painted for long-term corrosion resistance, and then black crinkle painted on the outer surface.. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution, and each wing nut is supplied with a separate stud which permits precise gasket positioning on the head prior to mounting the valve covers. Fits Chevrolet small and big block, and V6. 1/4in x 20 threads. 4 per package
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Engine Valve Cover Nut Proform
P311-1EBA2B9141-601New
Qty:
In Stock & Ready to Ship
$38.00
Engine Valve Cover Mini Nuts; Steel; Orange; Bowtie Logo; Studs Included
Engine Valve Cover Mini Nuts; Orange Finish With Black Bowtie Logo; Made From Quality Steel; Hex Head With 1/4-20 Thread 1.500 In. Studs Included; Washers Sold Separately; Officially Licensed GM Product; Sold As One Set of Four Pieces
Product Attributes:
Category:Mini Nuts
Emblem:Chevy Bowtie Emblem
Feature/Benefit:These Custom Valve Cover Mini Nuts Feature A Bowtie Logo On The Top Of Each Fastener.
Length:1 3/8 Inch
Part Type:Valve Cover Mini Nuts
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Pbb / Bbp
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Stud Length:1.75 Inch
Thread Size:1-1/4-inch-20 Thread
These custom valve cover mini nuts feature a Bowtie logo on the top of each fastener. Separate studs are included for precise gasket positioning. The wing nuts fit Chevrolet Big-Block, Small-Block, and V6 cylinder heads. Sold 4 per package.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Engine Valve Cover Mini Nut Fasteners; Chrome Plated Finish with No Logo; Made from High-Quality Aluminum; Hex Head with 1/4-20 Thread 1.000 Inch Studs Included; Stainless Washers Included; Sold as One Set of Four Pieces
Product Attributes:
Category:Mini Nuts
Feature/Benefit:1/4 Inch X 20 With Stainless Steel Washers.
Part Type:Mini Nuts
Stud Length:1.5 Inch
1/4in x 20 with Stainless Steel washers. For an uncluttered, highly distinctive look. 4 per package.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Engine Valve Cover Wing Nuts; Chrome Plated Finish With Bowtie Logo; Made From Steel; 4.25 Inches Tall With 1/4-20 Thread 1.00 Inch Studs Included; Washers Sold Separately; Officially Licensed GM Product; Sold As One Set of Four Pieces
Product Attributes:
Category:Wing Nuts
Emblem:Chevy Bowtie Emblem
Feature/Benefit:Premium Chrome Wing Nuts.
Length:4 1/8 Inch
Part Type:Valve Cover Wing Nuts
Stud Length:1.5 Inch
Thread Size:1/4in X 20 Threads
Premium Chrome Wing Nuts. Chevrolet Bowtie Emblem is cut sharply into the top of each wing nut. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution, and each wing nut is supplied with a separate stud which permits precise gasket positioning on the head prior to mounting the valve covers. Fits Chevrolet small and big block, and V6. 1/4in x 20 threads. 4 per package
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Engine Valve Cover Nut Proform
P311-2CCD6D3141-871New
Qty:
In Stock & Ready to Ship
$394.51
Engine Valve Covers; Tall; Die-Cast; BB Chevy; Chevy Orange with Raised Chevy Logo
Engine Valve Covers; Slant-Edge; Tall Style With Baffles; Chevy Orange Finish With Raised and Milled Chevy and Bowtie Logos; Fits 1965 to 1996 396-454 Big Block Chevys; Die-Cast Aluminum; Officially Licensed Chevrolet Performance Product
It's time to give your Big-Block Chevy a long overdue engine makeover. The new Slant-Edge look for big-block is the perfect way to customize your engine so it turns heads when you pop the hood at your local car show! With 13 different finish and Bowtie emblem combinations there's something for everyone, and the best part is that most these valve covers can be complemented with a matching Slant-Edge air cleaner, and breather caps to finish off the look in a perfectly coordinated way. There are three emblems to choose from: raised with a CNC machined finish, recessed and hand painted, blackfield recessed and raised, and lastly a new redfield recessed and raised. These premium die-cast aluminum valve covers have been optimized for maximum internal clearance, and feature innovative die-casting on the intake side so you don't have to struggle with bolts in tight places. Each pair of valve cover includes baffles, rubber grommets, and 6 special length mounting bolts for use on the intake side. Patent Pending.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Engine Valve Cover Wing Nuts; Chrome Plated Finish With Red Bowtie Logo; Made From Steel; 4.25 Inches Tall with 1/4-20 Thread 1.00 Inch Studs Included; Washers Sold Separately; Officially Licensed GM Product; Sold As One Set Of Four Pieces
Product Attributes:
Category:Wing Nuts
Emblem:Chevy Bowtie Emblem
Feature/Benefit:Premium Chrome Wing Nuts.
Length:4 1/8 Inch
Part Type:Valve Cover Wing Nuts
Prop 65 - Short Label:Warning: Cancer And Reproductive Harm
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Pbb / Bbp
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Stud Length:1.5 Inch
Thread Size:1/4in X 20 Threads
Premium Chrome Wing Nuts. Chevrolet Bowtie Emblem is cut sharply into the top of each wing nut then inlaid with classic Chevrolet red. The lower ends of the shafts are manufactured with wide shoulders for broad load distribution, and each wing nut is supplied with a separate stud which permits precise gasket positioning on the head prior to mounting the valve covers. Fits Chevrolet small and big block, and V6. 1/4" x 20 threads. 4 per package
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Engine Valve Cover Nut Proform
P311-572832B66038New
Qty:
In Stock & Ready to Ship
$30.26
Engine Valve Cover Mini Nuts; Hi-Torque Steel; Chrome; Studs Included; Pack of 4
Engine Valve Cover Mini Nut Fasteners; Hi-Torque Model; Chrome Plated Finish with No Logo; Made from High-Quality Steel; Hex Head with 1/4-20 Thread 1.000 Inch Studs Included; Washers Not Included; Sold as One Set of Four Pieces
Product Attributes:
Category:Mini Nuts
Feature/Benefit:Steel Mini Nuts, Clean Look, May Be Selected When More Torque Is Required To Prevent Leaks.
Part Type:Valve Cover Nut
Stud Length:1.5 Inch
Steel mini nuts, clean look, may be selected when more torque is required to prevent leaks. 1-1/2" high. 4 per pkg.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
11 Products for Engine Valve Cover Nut.