Finish Selecting Your Vehicle

Choose your Engine for your 1992 Pontiac Grand Am

  • 6 Cyl 3.3L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Cardone
    Cardone
  • Holley
    Holley
  • Painless Wiring
    Painless Wiring
  • Standard Ignition
    Standard Ignition
  • Standard Remanufactured
    Standard Remanufactured

Showing Products For 1992 Pontiac Grand Am Engine Control Module

Below are all the different brands and applications for 1992 Pontiac Grand Am Engine Control Module

Showing 1 - 10 of 22 Products for Engine Control Module.

Refine Your Search

Cardone
1992 Pontiac Grand Am Engine Control Module 6 Cyl 3.3L Cardone - Engine Control Module

P311-3C0E7EA    77-8706  Remanufactured

1228706 , 16198266

Qty:
In Stock & Ready to Ship
$107.81
Cardone Engine Control Module
  • The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc) may be required
  • Engine Control Module
  • Product Attributes:
    • FAQs:
      • Chrysler Pcm's Identified With A "v" Suffix Will Need To Be Vin Programmed.
      • Do All Chrysler Power Train Control Modules (pcm) Need Vin Programming?
      • Do All Ford Vehicles Require A Passive Anti Theft System (p.a.t.s) Reset?
      • I Replaced The Pcm In My Gm Vehicle. Do I Need To Reset The Passlock Or Passkey Vehicle Anti Theft System (vats)?
      • No, Not All Ford Vehicles Require A Pats Reset. Check The Pats Chart Found On The Motorcraft Site For Your Application.
      • Prior To Replacing The Original Ecm/pcm, The Installer Should Determine What Caused The Original To Fail. Common Areas That Cause Failures Are: Poor Grounds And Powers, Bad Wiring Harness, Shorted Solenoids/relays.
      • The Replacement Ecm For A Ford Vehicle Won’t Start The Vehicle. Why?
      • The Wrong Ecm May Have Been Installed. Verify The Ford Engineering Id Number, Found On The Ecm/pcm, Crosses To The Correct Cardone Number.
      • What Steps Should I Take To Assure The Original Ecm/pcm Is Causing The Issue?
      • Yes, There's A 10 Minute Procedure Utilizing A Tech 2 Scanner And A Gm Terminal Subscription. There Is Also A 30 Minute Manual Procedure That Can Be Done Without A Scanner. Refer To An Oe Approved Service Manual For Either Option.
    • Features and Benefits:
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • On-car Vehicle Validation Is Done To Test Durability And Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Re-soldering Of Critical Components Ensures Superior Electrical Connections. This Prevents Intermittent Failures And Leads To Longer Product Life.
      • Tested With Automated Computer Equipment Or Bench-tested, Depending On Application, To Ensure Functionality.
  • CARDONE Remanufactured Electronic and Powertrain Control Modules are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. All critical components are re-soldered or replaced at our Philadelphia manufacturing plant, and each unit is 100% computer tested to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1992 - Pontiac Grand Am V 6 Cyl 3.3L 204 -
ACDelco
1992 Pontiac Grand Am Engine Control Module 6 Cyl 3.3L ACDelco - Remanufactured; LABELED 1228706

P311-52D8C35    88999199  Remanufactured

Qty:
In Stock & Ready to Ship
$135.00 $119.06
ACDelco Engine Control Module
  • Remanufactured; LABELED 1228706
Brand: ACDelco
Additional Fitment Information:
Vehicle Engine VIN Block Engine
1992 - Pontiac Grand Am N V 6 Cyl 3.3L
Standard Remanufactured
1992 Pontiac Grand Am Engine Control Module 6 Cyl 3.3L Standard Remanufactured - Engine Control Computer

P311-38785B3    EM8706  New

Qty:
In Stock & Ready to Ship
$30.00 $99.86
Standard Remanufactured Engine Control Module
  • OE No. 16198266, 1228706 Blue Streak Premium Quality; Remanufactured
  • Engine Control Computer
Brand: Standard Remanufactured
Additional Fitment Information:
Vehicle Engine VIN Block Engine CID CC
1992 - Pontiac Grand Am N V 6 Cyl 3.3L 204 -
Standard Ignition
Engine Control Module Standard Ignition

P311-429B8DC    EM2A  Remanufactured

Qty:
In Stock & Ready to Ship
$226.69
Standard Ignition Engine Control Module
  • Engine Control Computer
  • Product Attributes:
    • Connector Gender: Female
    • Connector Quantity: 2
    • Contents: Sensor Simulator Tester
    • Terminal Type: Wire Lead
  • Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box. As a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Standard Ignition
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-560F833    554-113  New

Qty:
In Stock & Ready to Ship
$1,860.46
Holley Engine Control Module
  • HP EFI ECU
  • HP EFI ECU; Includes EFI ECU/USB Cable/Software; 4 Programmable Inputs;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Simple Installation - Plug And Play
    • Significantly More Functionality Than Other Competitive ECUs
    • Laptop Programmable ECU Includes Many Base Maps For Easy Use
    • For Anything That Needs Simple And Powerful ECU/Harness Solution
    • Self Tune Fuel Strategy More Time Enjoying Your Vehicle Power
    • ECU Fully Potted/Can Mount In The Engine Compartment Or Interior
    • Sealed Automotive And Marine Grade Connectors
    • 1-5 Bar Map Sensor Capability
    • 5.7 Touchscreen And Digital Gauges For Control/Monitoring
  • Looking for a plug and play alternative for your stock or built late model factory EFI engine? How about a replacement ECU for your older Holley C950? Holley has you covered. HP EFI ECU and harness kits are designed to be used with popular factory EFI engines as an alternative to the factory ECU and harness or as a replacement for your C950 ECU. The HP allows you to accurately control the fuel and ignition of your engine along with additional controls for nitrous, boost or water meth.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-4661F87    550-607  New

Qty:
In Stock & Ready to Ship
$2,713.72
Holley Engine Control Module
  • HP EFI ECU And Harness Kit
  • HP EFI ECU And Harness Kit; GM LS2/LS3/LS7; Includes ECU/Harness; Includes Bosch Oxygen Sensor;
  • Product Attributes:
    • Connector Series: Jetronic / Minitimer (bosch)
    • Crank Reluctor: 58x
    • Ignition Type: Gm Ls 58x
    • WARNING CA Proposition 65: No
  • Features:
    • Simple Installation - Plug And Play
    • Significantly More Functionality Than Other Competitive ECUs
    • Laptop Programmable ECU Includes Many Base Maps For Easy Use
    • For Anything That Needs Simple And Powerful ECU/Harness Solution
    • Self Tune Fuel Strategy More Time Enjoying Your Vehicle Power
    • ECU Fully Potted/Can Mount In The Engine Compartment Or Interior
    • Sealed Automotive And Marine Grade Connectors
    • 1-5 Bar Map Sensor Capability
    • 5.7 Touchscreen And Digital Gauges For Control/Monitoring
  • Looking for a plug and play kit for your GM LS engine? The HP ECU allows you to accurately control the fuel and ignition of your engine plus much more. Got a stock LS engine? Simply download a base map and youre on your way. Got a turbocharged, nitrous fed LS engine on water/meth? This HP EFI kit can control that too!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-0ECCBB9    554-153  New

Qty:
In Stock & Ready to Ship
$1,231.84
Holley Engine Control Module
  • EFI Terminator X Max ECU
  • EFI Terminator X Max ECU; 4 Inputs; 4 Outputs; Boost Control; Nitrous Control; Advanced Tables;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • 4 Inputs
    • 4 Outputs
    • Boost Control
    • Nitrous Control
    • Advanced Tables
    • Free EFI Tuning Software
  • These standalone Terminator X ECUs (Electronic Control Unit) are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-4A6A259    554-152  New

Qty:
In Stock & Ready to Ship
$869.05
Holley Engine Control Module
  • EFI Terminator X ECU
  • EFI Terminator X ECU; 4 Inputs; 4 Outputs; Boost Control; Nitrous Control; Advanced Tables;
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • 4 Inputs
    • 4 Outputs
    • Boost Control
    • Nitrous Control
    • Advanced Tables
    • Free EFI Tuning Software
  • These standalone Terminator X ECUs (Electronic Control Unit) are intended to be used as service components for your Terminator X EFI installation. The Terminator X ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, or progressive nitrous control. The Terminator X Max ECU features real-time fuel learn, high impedance injector drivers, an integrated 1bar MAP sensor, electronic transmission control, drive-by-wire throttle body control, and 4 programmable inputs and outputs. The inputs and outputs are ideal for electric fans, boost control solenoids, progressive nitrous control, and much more.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-023D512    550-606N  New

Qty:
In Stock & Ready to Ship
$2,957.32
Holley Engine Control Module
  • HP EFI ECU And Harness Kit
  • HP EFI ECU And Harness Kit; Universal Ford V8 Multi-Point Fuel Injection; Includes ECU/Harness; Includes NTK Oxygen Sensor;
  • Product Attributes:
    • Connector Series: Jetronic / Minitimer (bosch)
    • Ignition Type:
      • Coil - (no Timing Control)
      • Ford Tfi
      • Holley Dual Sync Distributor
    • WARNING CA Proposition 65: No
  • Features:
    • Simple Installation - Plug And Play
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • 5.7 in. Color Touchscreen For On-The-Fly Tune/DataLog/Gauge Panel
    • Advance Idle/Closed Loop/Enrichment Strategy For Stable Operation
    • ECU Fully Potted/Can Mount In The Engine Compartment Or Interior
    • Individual Cylinder Fuel/Spark Control To Unlock Engine Potential
    • Can Be Configured Wet Or Dry With Closed Loop Feedback
    • Full Timing Retard/Control Configured Per Stage By Rpm Or Time
    • Sealed Automotive And Marine Grade Connectors
    • Calibrated To Enter Percent Flow Of Injector Flow For Precision
    • Integrated Water/Methanol Injection Control
  • Looking for a alternative for your stock or built late model factory FORD EFI engine? How about a replacement ECU for your older Holley C950? Holley has you covered. HP EFI ECU and harness kits are designed to be used with popular factory EFI engines as an alternative to the factory ECU and harness or as a replacement for your C950 ECU. The HP allows you to accurately control the fuel and ignition of your engine along with additional controls for nitrous, boost or water meth.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Engine Control Module Holley

P311-552CE99    550-606  New

Qty:
In Stock & Ready to Ship
$2,524.39
Holley Engine Control Module
  • HP EFI ECU And Harness Kit
  • HP EFI ECU And Harness Kit; Universal Ford V8 Multi-Point Fuel Injection; Includes ECU/Harness; Includes Bosch Oxygen Sensor;
  • Product Attributes:
    • Connector Series: Jetronic / Minitimer (bosch)
    • Ignition Type:
      • Coil - (no Timing Control)
      • Ford Tfi
      • Holley Dual Sync Distributor
    • WARNING CA Proposition 65: No
  • Features:
    • Simple Installation - Plug And Play
    • Self-Tuning Fuel Table Strategy Greatly Simplifies Tuning Process
    • 5.7 in. Color Touchscreen For On-The-Fly Tune/DataLog/Gauge Panel
    • Advance Idle/Closed Loop/Enrichment Strategy For Stable Operation
    • ECU Fully Potted/Can Mount In The Engine Compartment Or Interior
    • Individual Cylinder Fuel/Spark Control To Unlock Engine Potential
    • Can Be Configured Wet Or Dry With Closed Loop Feedback
    • Full Timing Retard/Control Configured Per Stage By Rpm Or Time
    • Sealed Automotive And Marine Grade Connectors
    • Calibrated To Enter Percent Flow Of Injector Flow For Precision
    • Integrated Water/Methanol Injection Control
  • Looking for a alternative for your stock or built late model factory FORD EFI engine? How about a replacement ECU for your older Holley C950? Holley has you covered. HP EFI ECU and harness kits are designed to be used with popular factory EFI engines as an alternative to the factory ECU and harness or as a replacement for your C950 ECU. The HP allows you to accurately control the fuel and ignition of your engine along with additional controls for nitrous, boost or water meth.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 22 Products for Engine Control Module.