1991 Suzuki Swift Ignition Performance Module Ignition

Ignition Performance Module Holley

Part # P311-022962D Manu # 556-151 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $397.56

Sniper EFI Hyperspark CD Ignition Box
Sniper EFI Hyperspark CD Ignition Box; Includes Ignition/Harness/Mounting Screws/Lock Washers;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed To Work w/Sniper EFI - Minimal Wiring Required
- Hall Effect Crank Sensor In Billet Dist. Housing
- Provides A Noise Free Signal To Sniper ECU
- Pre-Terminated Ignition Coil Connector
- Ignition Box is Sealed and Powdercoated For Harshest Of Locations
- LED on Ign. Box Helps Verify 12V/Cranking RPM/Low Battery Volts
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing HyperSpark Ignition, from Sniper EFI. The complete system consists of a CD Ignition Box, Billet distributor with Hall effect crank signal sensor, an ignition coil, and complete wiring harness ready to plug and play with your Sniper EFI System

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Ignition Performance Module Holley

Part # P311-2A238BA Manu # 556-154 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $392.69

Sniper EFI Hyperspark 2 Ignition Box
Sniper EFI Hyperspark 2 Ignition Box; Includes Ignition Harness;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Plug And Play With Existing Hyperspark Installations/Or Sniper EFI Hyperspark Main Harnesses
- Includes An Ignition Harness For Fresh Sniper Efi Installs Simply Wanting To Add Timing Control
- New Processor And Board Design Provide A Highly Efficient Ignition
- High RPM Operation And Maximum Output Using The Hyperspark Ignition Coil
- Consistently High Spark Energy Of 135Mj To 150Mj For Every Firing/From Idle To Redline Rpm
- Operates On Most 7 To 28-Volt Electrical Systems
- Fully Protected Against An Open Coil/Shorted Coil And Open Load
- Quickens Throttle Response And Improves Starting
- Tach Output To Drive An External Tachomete
The HyperSpark 2 ignition box packs all of the proven features of its predecessor into a smaller form factor package, making it easier to mount, providing the cleanest installation possible. This ignition box packs up to 150mj of spark energy when used with its matching ignition coil, PN 556-152, resulting in enough energy to safely fire your Sniper EFI engine combination.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Ignition Performance Module AutoMeter

Part # P311-319B488 Manu # 5323 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $51.15

SIGNAL SPLITTER / ADAPTER, OBD-II
OBD-II SIGNAL SPLITTER/ADAPTER
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Device And Vehicle Compatibility May Vary
- Maintain OBD-II Data Signal Integrity
This low profile OBD-II signal splitter / pass through alows for remote location of connections for AutoMeter products like AirDrive,DashLink,DashControl and SmartConnect instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: AutoMeter

Vehicle

Ignition Performance Module AutoMeter

Part # P311-3B9B317 Manu # 9109 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $108.94

FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES
FUEL SIGNAL ADAPTER FOR AUTOMETER GAUGES
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message:
  - Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
  - [triangle Explanation Mark] Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Allows You To Use Any AutoMeter Fuel Level Gauge
- 3 Push Buttons w/LED Display For Easy Set Up
- Low Fuel Level Warning At 10 Percent
- 8 Pre-Programmed Resistance Ranges
- Configurable Option w/Linear Adjustments At 5 Points
The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy set up. This unit is a compact size at 3 1/8" wide x 2 1/2" tall x 3/4" thick. A low fuel level warning is available at 10% and off at 15%. It can turn on an LED or relay.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: AutoMeter

Vehicle

Ignition Performance Module AutoMeter

Part # P311-3E6A331 Manu # 9113 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $417.89

OBD-II DATA MODULE, CAN BRIDGE
Autometer CAN Bridge OBDll Data Interface Module
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- Simplifies instrumentation wiring and installation - no sensors to hookup, which means less wires to connect and no adapters to worry about
- Works with most OBD-11 applications which is standardized across all OEMs starting in 1996
- Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation
- Sensor data must be present on the OBD II data stream to function, otherwise a discrete sensor must be used
- Plug-n-play from OBDll to lnVision LCD dashes and traditional round AutoMeter tachometers, electronic speedometers, and short sweep electric gauges
- 6 total channels available - tachometer, speedometer, fuel level, temp, pressure, & volts
The new CAN Bridge from AutoMeter is the ideal solution to streamline adding gauges or an lnVision LCD dash to OBDll based engine and vehicle platforms (1996+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, water temperature, fuel level, oil pressure, and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice utilizing the module's menu navigation buttons and OLED display. Simplify the next instrumentation installation on your ride with the advanced CAN Bridge system from AutoMeter!

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: AutoMeter

Vehicle

Ignition Performance Module MSD

Part # P311-44266FA Manu # 77303 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $632.94

Power Grid Ignition System™ Controller
Power Grid Ignition System™ Controller; For Use w/Ignition Control PN[7720]; Compatible w/Other MSD Ignition Boxes; Requires Windows-based Laptop For Configuration; Black;
Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Five Retard Stages For Nitrous
- Four Steps Of RPM Limits
- Advanced Individual Cylinder Timing
- Timing Based On Engine RPM And Gear Value
- Shift Light Settings For Each Gear
- Ignition Data Acquisition Accepts Multiple Runs
- USB Connection For Ease Of Programming
- Output Switch Set On RPM/Pressure/Time
The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing. The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products. The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units! The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware. NOTE: To use any modules with the Power Grid Ignition System, PN 7720 and 7730, users MUST plug the modules into a 4-Connector CAN-Bus Hub PN 7740 to be attached to the Power Grid System Controller.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Performance Module MSD

Part # P311-5AC5051 Manu # 7762 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $382.30

Power Grid Ignition System™ Boost/Retard Module
Power Grid Ignition System™ Boost/Retard Module; For Use w/MSD Power Grid System;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- USB Connection For Ease Of Programming
- Timing Based On Engine RPM And Gear Value
- Advanced Individual Cylinder Timing
- Five Retard Stages For Nitrous
- Four Steps Of RPM Limits
- Output Switch Set On RPM/Pressure/Time
- Shift Light Settings For Each Gear
- Ignition Data Acquisition Accepts Multiple Runs
This Power Grid module does exactly as its name suggests; retards the ignition timing in relation to boost, pressure. It also has an output wire that can be used to activate another device based on boost pressure, as well as an overboost shut-down feature that will shut the ignition off if boost exceeds the overboost target.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Performance Module MSD

Part # P311-452C50A Manu # 7730 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $663.44

Power Grid Ignition System™ Controller
Power Grid Ignition System™ Controller; Not Legal For Use Or Sale On Pollution Controlled Vehicles; Red;
Product Attributes:
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- USB Connection For Ease Of Programming
- Timing Based On Engine RPM And Gear Value
- Advanced individual cylinder timing based on gear or time
- Five Retard Stages For Nitrous
- Four steps of rpm limits for burnout
- spool
- launch and overrev
- Output switch set on rpm
- pressure or time
- Shift Light Settings For Each Gear
- Ignition Data Acquisition Accepts Multiple Runs
- Crank Trigger system highly recommended
The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based software is designed with tabs to help racers easily select different programming windows and parameters. Also, the data acquisition files of the ignition are now captured on a micro SD card for ease of storage and reviewing. The Power Grid Ignition incorporates CAN-Bus technology which reduces the amount of wiring and simplifies the addition of accessory modules. The CAN-Bus is a common harness that accessory controls are connected to and easily brought into the programming library of the View Software. With this technology, racers can connect the Power Grid system directly into their Racepak Data Recorder and other Racepak products. The Power Grid Controller is the brains behind the entire system and can be used with any MSD Ignition or the Pro Mag to provide advance ignition tuning capabilities. While it is compatible with all MSD boxes, the new Power Grid System Controller has been specially designed to mount to the Power Grid-7 box. Also, this new Ignition packs higher output than the current programmable units! The Power Grid Controller is supplied with the View Software, wiring harness, micro-SD card and mounting hardware. The ignition, available separately, is supplied with the harness and mounting hardware. NOTE: To use any modules with the Power Grid Ignition System, PN 7720 and 7730, users MUST plug the modules into a 4-Connector CAN-Bus Hub PN 7740 to be attached to the Power Grid System Controller.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Ignition Performance Module Edge

Part # P311-305E182 Manu # 98620 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $175.10

Edge Accessory System Starter Kit
Edge Accessory System Starter Kit; w/15 in. EGT Cable For CS/CTS/CS2/CTS2; Expandable;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Ideal For The Daily Diesel Driver
- Connect To Multiple EGT Sensors To Monitor Multiple Temps
- Monitor Exhaust Gas Temperatures
The Edge accessory system (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories daisy-chain style to the evolution CS or CTS. This means Edge can create optional accessories that can be added to the products by the owner at any time. An optional exhaust gas temperature (EGT) probe is one example of an optional accessory that will be offered by Edge. Look for a variety of other optional accessories to become available in the near future.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Edge

Vehicle

Shop By Brand

Showing Products For 1991 Suzuki Swift Ignition Performance Module