1991 BMW 318i Engine Cylinder Head Gasket Engine - Cometic Gasket, Elring, FelPro, Ford Racing, Sce Gaskets

1991 BMW 318i Engine Cylinder Head Gasket 4 Cyl 1.8L Elring

Part # P311-5690D5E Manu # 767.859 Condition: New

This Part Fits the Following OEM/Substitute Numbers: 0015447 , 035-1888 , 0351888 , 1 721 546 , 1 721 547 , 10069200 , 10103900 , 11 12 1 721 546 , 11 12 1 721 547 , 30-026346-10 , 30-026346-20 , 30-026346-30 , 414631 , 414631 AO , 414631P , 50231 , 54682 , 60-28485-00 , 61-28485-00 , BY560 , BY561 , H50231-00

Qty:

In Stock & Ready to Ship

Best Price: $35.41

Gasket, cylinder head
Installed Thickness: 1.74mm Diameter: 85mm
Product Attributes:
- Additionally required articles (article numbers): 802.760
- Gasket Design: Fibre Composite
- Installed Thickness [Mm]: 1,74

Brand: Elring

Vehicle	Block	Engine	CID	CC
1991 - BMW 318i	L	4 Cyl 1.8L	-	1796

1991 BMW 318i Engine Cylinder Head Gasket Elring

Part # P311-0BAE713 Manu # W0133-2076803 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $56.91

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
1.74mm

Brand: Elring

Vehicle
1991 - BMW 318i

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-229830C Manu # C5639-051 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $114.71

GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.530in. Bore
Product Attributes:
- Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-266EF3A Manu # C5640-051 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $114.71

GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.580in. Bore
Product Attributes:
- Engine Make/Size: Gm/mercury Marine Gen Iv Big Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-2BD52D3 Manu # C5764-051 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $125.00

GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; LHS
Product Attributes:
- Engine Make/Size: Gm/mercury Marine 8.1l
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-06B5042 Manu # C5634-051 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $114.71

GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.500in. Bore
Product Attributes:
- Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-0BFE3AF Manu # C5702-040 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $145.42

GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; RHS
Product Attributes:
- Engine Make/Size: Gm Lsx
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
- Improved Clamp Load Around The Cylinder
- Requires No Sealants Or Re-Torque
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Right Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-544C02F Manu # C5703-040 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $145.42

GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.165in. Bore; LHS
Product Attributes:
- Engine Make/Size: Gm Lsx
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Utilizes Integrated Stopper Layer For Combustion Chamber Sealing
- Improved Clamp Load Around The Cylinder
- Requires No Sealants Or Re-Torque
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". 18 Bolt Heads. Left Side. Cometic MLX (Multi-Layer Stopper) gaskets utilize an integrated stopper layer for combustion chamber sealing and improved clamp load around the cylinder without increasing bore distortion. MLX technology can be found in some head gaskets and are made from the same materials as our MLS Head Gaskets. No sealants or re-torque required.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-41B76FA Manu # C5582-040 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $113.10

Chrysler R3 Race Block Cylinder Head Gasket
Chrysler R3 Race Block .040in. MLS Cylinder Head Gasket; 4.185in. Bore; W7;W8;W9 Heads
Product Attributes:
- Engine Make/Size: Chrysler/dodge R3 Iron Nascar«/late Model V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Thickness is 0.040". W7-W8-W9 Heads. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Engine Cylinder Head Gasket Cometic Gasket

Part # P311-246AE48 Manu # C5637-051 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $114.71

GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.600in. Bore
Product Attributes:
- Engine Make/Size: Gm/mercury Marine Gen Iv/v/iv Big Block
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
- Provides Maximum Sealing Performance
- Ideal For Aluminum Heads To Aluminum Blocks
- Ideal For Aluminum Heads To Cast Iron Blocks
- Comprised Of Multiple Layers Of Stainless Steel
- Creates The Ability To Rebound And Resist Corrosion
- Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Cometic Gasket

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1991 BMW 318i Engine Cylinder Head Gasket