Finish Selecting Your Vehicle

Choose your Engine for your 1990 Toyota Cressida

  • 6 Cyl 3.0L

Shop By Brand

The Following brands are available based on your search.

  • COMP Cams
    COMP Cams
  • Cometic Gasket
    Cometic Gasket
  • Elring
    Elring
  • FAG
    FAG
  • Fel-Pro
    Fel-Pro
  • Ford Racing
    Ford Racing
  • Ishino Stone
    Ishino Stone
  • NOK
    NOK
  • National Bearing
    National Bearing
  • Timken
    Timken

Showing Products For 1990 Toyota Cressida Engine Crankshaft Seal

Below are all the different brands and applications for 1990 Toyota Cressida Engine Crankshaft Seal

Showing 1 - 10 of 16 Products for Engine Crankshaft Seal.

Refine Your Search

NOK
1990 Toyota Cressida Engine Crankshaft Seal - Rear NOK

P311-1818FD7    W0133-1636213  New

Qty:
In Stock & Ready to Ship
$15.22
NOK Engine Crankshaft Seal  Rear
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • The earlier 20R & 22R seal (90311-80001) can be used. The 90311-80010 is the improved version. It is made out of silicone and has double lip for better sealing.
  • Rear
Brand: NOK
Position: Rear
Additional Fitment Information:
Vehicle Position
1990 - Toyota Cressida Rear
NOK
1990 Toyota Cressida Engine Crankshaft Seal - Front NOK

P311-0836975    W0133-1640815  New

Qty:
In Stock & Ready to Ship
$18.46
NOK Engine Crankshaft Seal  Front
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Brand: NOK
Position: Front
Additional Fitment Information:
Vehicle Position
1990 - Toyota Cressida Front
Ishino Stone
1990 Toyota Cressida Engine Crankshaft Seal - Front Ishino Stone - Made by NOK

P311-295D6B2    W0133-1640815  New

Qty:
In Stock & Ready to Ship
$38.85
Ishino Stone Engine Crankshaft Seal  Front
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • 52x70x8.5mm.
  • Made by NOK
  • Front
Brand: Ishino Stone
Position: Front
Additional Fitment Information:
Vehicle Position
1990 - Toyota Cressida Front
Timken
1990 Toyota Cressida Engine Crankshaft Seal - Rear 6 Cyl 3.0L Timken

P311-0734B49    228010  New

Qty:
In Stock & Ready to Ship
$20.47
Timken Engine Crankshaft Seal  Rear
  • Grease/Oil Seal
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Timken
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1990 - Toyota Cressida Rear L 6 Cyl 3.0L - 2954
Timken
1990 Toyota Cressida Engine Crankshaft Seal - Front 6 Cyl 3.0L Timken

P311-5DAD6CD    710187  New

Qty:
In Stock & Ready to Ship
$28.62
Timken Engine Crankshaft Seal  Front
  • Grease/Oil Seal
  • Vent holes allow lubricants to flow freely around the seal lip - cooling seal components and removing heat build-up
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.
Brand: Timken
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1990 - Toyota Cressida Front L 6 Cyl 3.0L - 2954
National Bearing
1990 Toyota Cressida Engine Crankshaft Seal - Front 6 Cyl 3.0L National Bearing

P311-5A9E1B5    710187  New

052-3387 , 052-3920 , 15-01552 , 19016647 , 19016647B , 19035183 , 19035183B , 20432 , 710187 , 90311-52003 , 90311-52013 , 90311-52022 , JV5144 , KS20432 , L49-8955 , NJ645

Qty:
In Stock & Ready to Ship
$28.46
National Bearing Engine Crankshaft Seal  Front
  • Crankshaft Seal
  • National 710187 Crankshaft Seal
  • Product Attributes:
    • Helix Type: Clockwise-spiral Lip Design
    • Housing Bore (Inch): 2.756
    • Inside Diameter:
      • 2.047
      • 52.000
    • Outside Diameter:
      • 2.766
      • 70.270
    • Outside Diameter (Inch): 2.766
    • Part Description: Oil Seal
    • Shaft (Inch): 2.047
    • Shaft (MM): 52.000
    • Unit of Dimension: Metric
    • Width (Inch): 0.335
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Brand: National Bearing
Position: Front
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1990 - Toyota Cressida Front L 6 Cyl 3.0L - 2954
National Bearing
1990 Toyota Cressida Engine Crankshaft Seal - Rear 6 Cyl 3.0L National Bearing

P311-38CFB2F    228010  New

0514.20 , 0514.50 , 052-1112 , 052-2193 , 052-3468 , 12014827 , 12014827B , 12015352 , 12015352B , 12183539 , 1218389-3 , 12279-21010 , 12279-A4600 , 12279-R4600 , 12279-R4601 , 12279-R4610 , 12279-R4611 , 1227921000 , 15-08307 , 15-09806 , 15-09815 , 17179 , 17211 , 17225 , 17227 , 17232 , 17233 , 19016605 , 19016605B , 19026794 , 19026794B , 211-6465 , 228010 , 31494 , 31513 , 51450 , 65-00417 , 65-00862 , 65-02288 , 66658 , 66748 , 7700517057 , 7700743161 , 7700859692 , 7703087035 , 7703087080 , 90311-80001 , 90311-80002 , 90311-80004 , 90311-80068 , 90311-80139 , BS239 , J0743161 , L-0020-015 , L-0061-013 , L-0071-003 , L49-7304 , L49-7410 , L497401 , N31511 , NA727 , NB312 , NJ030 , NJ056 , NJ558 , PR8387 , T3065057 , W10-703 , W10-708 , WR546

Qty:
In Stock & Ready to Ship
$20.10
National Bearing Engine Crankshaft Seal  Rear
  • Crankshaft Seal
  • with 0.512 (in) Width 3.951 (in) Outside Diameter
  • National 228010 Crankshaft Seal
  • Product Attributes:
    • Helix Type: Counter-clockwise-spiral Lip Design
    • Housing Bore (Inch): 3.937
    • Inside Diameter:
      • 3.150
      • 80.000
    • Outside Diameter:
      • 100.350
      • 3.951
    • Outside Diameter (Inch): 3.951
    • Part Description: Oil Seal
    • Shaft (Inch): 3.150
    • Shaft (MM): 80.000
    • Unit of Dimension: Metric
    • Width (Inch): 0.512
  • National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Brand: National Bearing
Position: Rear
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1990 - Toyota Cressida Rear L 6 Cyl 3.0L - 2954
Elring
1990 Toyota Cressida Engine Crankshaft Seal 6 Cyl 3.0L Elring

P311-099AAB9    473.150  New

15019600 , 19034730 , 19034730B , 2025 , 67860 , 81-53274-00 , 90311-42036 , 90311-42037 , 90311-42045 , J90 311 420 19 , JV5157 , P77595-01 , TCS 46080

Qty:
In Stock & Ready to Ship
$7.97
  • Shaft Seal, crankshaft
  • Width: 7mm Inner Diameter: 42mm Outer Diameter: 60mm Dust Cover: with dust lip Swirl Type: Right-hand Twist
  • Product Attributes:
    • Dust Cover: With Dust Lip
    • Radial Shaft Seal Design: As
Brand: Elring
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Toyota Cressida L 6 Cyl 3.0L - 2954
FAG
1990 Toyota Cressida Engine Crankshaft Seal - Rear FAG

P311-57DAF3E    SS3346  New

228015 , 31511 , 4133346100

Qty:
In Stock & Ready to Ship
$18.57
  • Multi-purpose Oil Seal
  • FAG Global Number 413 3346 100
  • Product Attributes:
    • :
      • 3.15
      • 80.01
    • Bore Diameter:
      • 100
      • 3.937
    • Seal Outside Diameter:
      • 100.203
      • 3.945
    • Seal Type: Rubber; Spring; Auxilary Lip
    • Seal Width:
      • 10.008
      • 3.15
    • Sealing Material: Silicone
  • Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG's quality standards. Seals are designed to protect wheel end components from contamination - such as dirt, dust, and moisture - and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Brand: FAG
Position: Rear
Additional Fitment Information:
Vehicle Position
1990 - Toyota Cressida Rear
Fel-Pro
1990 Toyota Cressida Engine Crankshaft Seal - Rear Fel-Pro

P311-028EEF2    W0133-2403660  New

Qty:
In Stock & Ready to Ship
$24.28
Fel-Pro Engine Crankshaft Seal  Rear
Brand: Fel-Pro
Position: Rear
Additional Fitment Information:
Vehicle Position
1990 - Toyota Cressida Rear

Showing 1 - 10 of 16 Products for Engine Crankshaft Seal.