Finish Selecting Your Vehicle

Choose your Submodel for your 1990 Chevrolet C1500

  • 454 SS
  • Cheyenne
  • Scottsdale
  • Silverado
  • WT

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • Cometic Gasket
    Cometic Gasket
  • Fel-Pro
    Fel-Pro
  • FelPro
    FelPro
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Mr Gasket
    Mr Gasket

Showing Products For 1990 Chevrolet C1500 Engine Intake Manifold Gasket

Below are all the different brands and applications for 1990 Chevrolet C1500 Engine Intake Manifold Gasket

Showing 1 - 10 of 52 Products for Engine Intake Manifold Gasket.

Refine Your Search

ACDelco
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 5.0L ACDelco

P311-591EBDE    W0133-1688184  New

Qty:
In Stock & Ready to Ship
$34.45
ACDelco Engine Intake Manifold Gasket
  • This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
  • Genuine GM
  • Gasket Kit
Brand: ACDelco
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 5.0L 305 -
Cometic Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Cometic Gasket - Intake Manifold Gasket

P311-38EE2BE    C5428-060  New

Qty:
In Stock & Ready to Ship
$32.35
Cometic Gasket Engine Intake Manifold Gasket
  • Chevrolet Mark-IV Big Block V8 Intake Manifold Gasket Set
  • 0.060 in. Aramid Fiber; Brodix Big Brodie Head; Rectangle Port
  • Chevrolet Mark-IV Big Block V8 .060in. Fiber Intake Manifold Gasket Set; Brodix Race-Rite 26 Degree/Dragon Slayer/BB-1/BB-2/BB-2 Plus/BB-2 X/BB-2 Xtra Heads
  • Intake Manifold Gasket
  • Product Attributes:
    • Engine Make/Size: Gm Gen Ii/mark Iv
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Premium Hi-Temperature / Hi-Density / Creep Resistant Material
    • Requires No Re-Torqueing And Is Fuel Resistant
    • Asbestos Free
  • COMETIC Aramid Fiber is a premium hi-temperature, hi-density, creep resistant material that requires no re-torqueing and is fuel resistant. All Cometic fiber materials are asbestos free and require no additional sealants. Brodix Big Brodie Rectangle Port.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1990 - Chevrolet C1500 454 SS V 8 Cyl 7.4L 454 -
Cometic Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Cometic Gasket - Intake Manifold Gasket

P311-38EE2BE    C5428-060  New

Qty:
In Stock & Ready to Ship
$32.35
  • Chevrolet Mark-IV Big Block V8 Intake Manifold Gasket Set
  • 0.060 in. Aramid Fiber; Brodix Big Brodie Head; Rectangle Port
  • Chevrolet Mark-IV Big Block V8 .060in. Fiber Intake Manifold Gasket Set; Brodix Race-Rite 26 Degree/Dragon Slayer/BB-1/BB-2/BB-2 Plus/BB-2 X/BB-2 Xtra Heads
  • Intake Manifold Gasket
  • Product Attributes:
    • Engine Make/Size: Gm Gen Ii/mark Iv
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
  • Features:
    • Premium Hi-Temperature / Hi-Density / Creep Resistant Material
    • Requires No Re-Torqueing And Is Fuel Resistant
    • Asbestos Free
  • COMETIC Aramid Fiber is a premium hi-temperature, hi-density, creep resistant material that requires no re-torqueing and is fuel resistant. All Cometic fiber materials are asbestos free and require no additional sealants. Brodix Big Brodie Rectangle Port.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1990 - Chevrolet C1500 Silverado V 8 Cyl 7.4L 454 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 5.7L Mr Gasket - Intake Gasket

P311-315C03A    126  New

Qty:
In Stock & Ready to Ship
$45.00
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.38 in. x H-2.25 in.; Thickness .125 in.; Brodix Aluminum Head
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.38 in. x H-2.25 in.; Thickness .125 in.; Brodix Aluminum Head;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Small Block Gen I
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.380 In. X 2.250 In.
    • Thickness: 0.125 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Forms An Airtight Leak Proof Seal
    • Precision Die Cut For Excellent Seal And Fit
    • Can Be Trimmed To Meet Your Specifications
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 5.7L 350 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 5.7L Mr Gasket - Intake Gasket

P311-15D5273    113  New

Qty:
In Stock & Ready to Ship
$45.74
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.31 in. x H-2.31 in.; Thickness .125 in.; Large Port And Bolt Locations
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.31 in. x H-2.31 in.; Thickness .125 in.; Large Port And Bolt Locations;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Small Block Gen I
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.310 In. X 2.310 In.
    • Thickness: 0.125 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Forms An Airtight Leak Proof Seal
    • Precision Die Cut For Excellent Seal And Fit
    • Can Be Trimmed To Meet Your Specifications
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 5.7L 350 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Mr Gasket - Intake Gasket

P311-4EF7D37    110  New

1239

Qty:
In Stock & Ready to Ship
$45.35
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.75 in. x H-2.50 in.
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.75 in. x H-2.50 in.;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Big Block Mark Iv
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.750 In. X 2.500 In.
    • Thickness: 0.120 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Forms An Airtight Leak Proof Seal
    • Precision Die Cut For Excellent Seal And Fit
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 7.4L 454 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 5.7L Mr Gasket - Intake Gasket

P311-315C03A    126  New

Qty:
In Stock & Ready to Ship
$45.00
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.38 in. x H-2.25 in.; Thickness .125 in.; Brodix Aluminum Head
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.38 in. x H-2.25 in.; Thickness .125 in.; Brodix Aluminum Head;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Small Block Gen I
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.380 In. X 2.250 In.
    • Thickness: 0.125 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Forms An Airtight Leak Proof Seal
    • Precision Die Cut For Excellent Seal And Fit
    • Can Be Trimmed To Meet Your Specifications
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 5.7L 350 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Mr Gasket - Intake Gasket

P311-3236D72    108  New

Qty:
In Stock & Ready to Ship
$39.78
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.75 in. x H-2.50 in.; Hi-Performance Only
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.75 in. x H-2.50 in.; Hi-Performance Only;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Big Block Mark Iv
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.750 In. X 2.500 In.
    • Thickness: 0.060 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Forms An Airtight Leak Proof Seal
    • Precision Die Cut For Excellent Seal And Fit
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 7.4L 454 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Mr Gasket - Ultra Seal Intake Gasket

P311-156F686    5827  New

1212

Qty:
In Stock & Ready to Ship
$47.28
Mr Gasket Engine Intake Manifold Gasket
  • 1.75 in. x 2.16 in. Oval Port; Ultra-Seal Material
  • Ultra Seal Intake Gasket; 1.75 in. x 2.16 in. Oval Port; Ultra-Seal Material;
  • Ultra Seal Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Big Block Mark Iv
    • Package Type: Retail
    • Port Shape: Oval
    • Port Size: 1.750 In. X 2.160 In.
    • Thickness: 0.060 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Made From Cellulose/Nitrile Composition
    • Provides Excellent Sealing And Durability
    • Has Silicone Beading On Both Sides
    • Eliminates Need For Adding Silicone
  • Mr. Gasket Ultra-Seal Intake Manifold Gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes manifold end seals and distributor gasket.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 7.4L 454 -
Mr Gasket
1990 Chevrolet C1500 Engine Intake Manifold Gasket 8 Cyl 7.4L Mr Gasket - Intake Gasket

P311-43CBDB2    122  New

Qty:
In Stock & Ready to Ship
$51.17
Mr Gasket Engine Intake Manifold Gasket
  • Rectangle Port Shape; Port Dimensions W-1.85 in. x H-2.55 in.; Thickness .120 in.
  • Intake Gasket; Rectangle Port Shape; Port Dimensions W-1.85 in. x H-2.55 in.; Thickness .120 in.;
  • Intake Gasket
  • Product Attributes:
    • Engine Make/Size: Chevrolet Big Block Mark Iv
    • Package Type: Retail
    • Port Shape: Rectangle
    • Port Size: 1.850 In. X 2.550 In.
    • Thickness: 0.120 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Made From Cellulose/Nitrile Composition
    • Provides Excellent Sealing And Durability
    • Can Be Trimmed If Necessary
  • Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. They provide excellent sealing and durability. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle Block Engine CID CC
1990 - Chevrolet C1500 V 8 Cyl 7.4L 454 -

Showing 1 - 10 of 52 Products for Engine Intake Manifold Gasket.