1989 Chevrolet C3500 Fuel Tank Pickup Air and Fuel Delivery

Fuel Tank Pickup Holley

Part # P311-5CA9541 Manu # 16-203 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $50.64

HydraMat Install Kit
HydraMat Install Kit; Magnet Kit; Includes 4 Magnets w/Integrated 4-40 Mounting Studs/Nuts And Washers;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Magnet With Integrated Mounting Stud
- Easy Installation
- Available In 4-40 and 6-32 Stud Configurations
- 4-40 Kit Provides 15 lbs.. Of Mounting Strength Per Magnet
- Kit Includes 4 Magnets Nuts and Washers
The HydraMat magnet kits are designed as a cost effective solution for mounting the Holley HydraMat in the fuel tank or cell. Ideal for use in fuel tanks with a small sender opening where the Click Bond kits cannot be used. Once installed, the magnets can be positioned so the HydraMat lays flat in the bottom of the fuel tank.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-5BA3465 Manu # 16-101 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $326.49

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 15 in. Long x 8 in. Wide Cross; 15 Micron; Center Outlet 3/8 in. NPT;
Product Attributes:
- Micron Rating: 15
- Outlet Position: Center
- Product Length: 15.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
- Reduces Potential For Air To Enter Fuel System
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
- Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
- Internal Reservoir Assists Fuel Available At The Pickup
- Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
- No Need For A Separate Filter Before The Fuel Pump
- Can Be Folded and Compressed For Easy Install
- Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-20917C8 Manu # 16-111 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $257.93

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 3 in. x 15 in. Rectangle; 11mm Outlet;
Product Attributes:
- Micron Rating: 15
- Product Length: 15.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Design
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Unique Internal Reservoir Keeps Fuel Available At Pickup
- Pin Locking For Removal/Reposition w/o Damage/Loss Of Retention
- Outlet Has 6 Positions To Orient The Hydramat In The Fuel Cell
- Greatly Reduces Potential For Air To Enter Into The Fuel System
- SurfaceTension/Wicking Allow Fuel Draw w/Mat Uncovered
- Tiny Pores Seal Off w/Surface Tension Fuel From Other Area Of Mat
- No Specialty Reservoirs/Sumps/PickUp Pumps Saving Cost/Complexity
- No Need For A Separate Filter Before The Fuel Pump
Holleys latest Hydramat design has an 11mm outlet that connects to the TI 450LPH and other pumps that use the same attachment design. The outlet has 6 lock pin positions to allow you to index the Hydramat on the fuel pump for custom applications depending on your fuel tank or cell setup. The multiple pin locking feature on the pump inlet allows for removal and repositioning without damage or loss of retention. This is a huge advantage over the one use only filter socks that are included with most pumps.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-14FAE49 Manu # 16-102 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $326.49

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 15 in. Long x 8 Wide in. Cross; 15 Micron; Offset Outlet 3/8 in. NPT;
Product Attributes:
- Micron Rating: 15
- Outlet Position: Offset
- Product Length: 15.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
- Reduces Potential For Air To Enter Fuel System
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
- Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
- Internal Reservoir Assists Fuel Available At The Pickup
- Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
- No Need For A Separate Filter Before The Fuel Pump
- Can Be Folded and Compressed For Easy Install
- Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-46DE2E0 Manu # 16-105 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $246.87

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 15 in. Long x 3 in. Wide Rectangle; 15 Micron; Center Outlet 3/8 in. NPT;
Product Attributes:
- Micron Rating: 15
- Product Length: 15.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
- Reduces Potential For Air To Enter Fuel System
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
- Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
- Internal Reservoir Assists Fuel Available At The Pickup
- Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
- No Need For A Separate Filter Before The Fuel Pump
- Can Be Folded and Compressed For Easy Install
- Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-31118A3 Manu # 16-107 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $510.04

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 15 in. x 15 in. Square; 15 Micron; Center Outlet 1/2 in. NPT;
Product Attributes:
- Micron Rating: 15
- Outlet Position: Center
- Product Length: 15.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
- Reduces Potential For Air To Enter Fuel System
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
- Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
- Internal Reservoir Assists Fuel Available At The Pickup
- Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
- No Need For A Separate Filter Before The Fuel Pump
- Can Be Folded and Compressed For Easy Install
- Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-5BDA77B Manu # 16-106 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $393.17

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 11 in. x 11 in. Square; 15 Micron; Center Outlet 1/2 in. NPT;
Product Attributes:
- Micron Rating: 15
- Outlet Position: Center
- Product Length: 11.000 In.
- WARNING CA Proposition 65: No
Features:
- Patent Pending Solves Problems w/Traditional Fuel Pick-Ups
- Reduces Potential For Air To Enter Fuel System
- Vehicles w/Fuel Starvation At Hard Corners/Stops/Inclines/Low Fuel
- Surface Tension/Fluid Wicking Allow Hydramat To Draw Fuel
- Area Of Hydramat Is Uncovered Tiny Pores In Media Seal
- Internal Reservoir Assists Fuel Available At The Pickup
- Eliminates Specialty Reservoirs Sumps/Pick Up Pumps
- No Need For A Separate Filter Before The Fuel Pump
- Can Be Folded and Compressed For Easy Install
- Hydramats Fit A Variety Of Stock Fuel Tanks/Race Fuel Cells
The amazing HydraMat(R) is Holleys patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. HydraMat is the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. HydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-5063946 Manu # 16-204 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $54.31

HydraMat Install Kit
HydraMat Install Kit; Magnet Kit; Includes 4 Magnets w/Integrated 6-32 Mounting Studs/Nuts And Washers;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Magnet With Integrated Mounting Stud
- Easy Installation
- Available In 4-40 and 6-32 Stud Configurations
- 6-32 Kit Provides 22 lbs.. Of Mounting Strength Per Magnet
- Kit Includes 4 Magnets Nuts and Washers
The HydraMat magnet kits are designed as a cost effective solution for mounting the Holley HydraMat in the fuel tank or cell. Ideal for use in fuel tanks with a small sender opening where the Click Bond kits cannot be used. Once installed, the magnets can be positioned so the HydraMat lays flat in the bottom of the fuel tank.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Fuel Tank Pickup Holley

Part # P311-3E9C986 Manu # 16-125 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $203.38

HydraMat Fuel Reservoir System
HydraMat Fuel Reservoir System; 3 in. x 8 in. Rectangle; w/6 Lock Pin End Position;
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Automotive 450 Liters Per Hour Plug Directly Into This Hydramat
- 8 in. Models With Either A Center Outlet Or Offset End Outlet
- Removal And Repositioning Without Damage Or Loss Of Retention
- Greatly Reduces The Potential For Air To Enter The Fuel System
- Perfect For Vehicles Experiencing Fuel Starvation
- Allow The Hydramat To Continue To Draw Fuel From The Tank
- HydraMat Is Uncovered Forcing Fuel To Be Drawn From Other Areas
- Unique Internal Reservoir Assists In Keeping Fuel Available
- Eliminates The Need For Specialty Reservoirs
- 15 Micron Pre-filter Eliminating The Need For A Separate Filter
The latest Hydramat design is a shorter 8 in. version of our popular 16-111 that includes an 11mm outlet that connects to the TI 450LPH and other pumps that use the same attachment design. Two models are available with either a center outlet or offset end outlet to help when space is limited in your tank. The outlet has 6 lock pin positions to allow you to index the Hydramat on the fuel pump for custom applications depending on your fuel tank or cell setup. The multiple pin locking feature on the pump inlet allows for removal and repositioning without damage or loss of retention. This is a huge advantage over the one use only filter socks that are included with most pumps.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Holley

Vehicle

Showing Products For 1989 Chevrolet C3500 Fuel Tank Pickup