Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Mando
    Mando
  • Raybestos
    Raybestos

Showing Products For 1988 Merkur Scorpio Disc Brake Caliper

Below are all the different brands and applications for 1988 Merkur Scorpio Disc Brake Caliper

Showing 1 - 8 of 8 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1988 Merkur Scorpio Disc Brake Caliper - Rear Right Cardone - Unloaded Caliper

P311-419491E    19-1346  Remanufactured

E7RY2552A

Qty:
In Stock & Ready to Ship
$20.70 $69.76
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 42.799
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position
1988 - Merkur Scorpio Rear Right
BBB Industries
1988 Merkur Scorpio Disc Brake Caliper - Front Right BBB Industries - Reman Caliper with Installation Hardware

P311-0D8E54D    99-07804A  Remanufactured

Qty:
In Stock & Ready to Ship
$3.00 $43.72
BBB Industries Disc Brake Caliper  Front Right
  • Supplied with Mounting Bracket
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: M10-1.0 X 32
    • Bleeder Screw Thread (mm): M10-1.0
    • Bleeder Thread Size: M10-1.0
    • Bracket Cast Numbers: 80
    • Bracket Included: Yes
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Yes
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 96, 38
    • Inlet Fitting Type: Plug
    • Inlet Port Thread Size (mm): M10-1.0
    • Inlet Thread Size: M10-1.0
    • Pads Included: No
    • Piston 1 Diameter (mm): 60
    • Piston Material: Steel
    • Piston Outside Diameter (in): 2
    • Piston Outside Diameter (mm): 60
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Position
1988 - Merkur Scorpio Front Right
Cardone
1988 Merkur Scorpio Disc Brake Caliper - Rear Right Cardone - Unloaded Caliper w/Bracket

P311-21248F5    19-B1346  Remanufactured

E7RY2552A

Qty:
In Stock & Ready to Ship
$20.70 $79.00
Cardone Disc Brake Caliper  Rear Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 42.799
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Rear Right
Additional Fitment Information:
Vehicle Position
1988 - Merkur Scorpio Rear Right
Mando
Disc Brake Caliper Mando

P311-3F73648    16A5278  New

Qty:
In Stock & Ready to Ship
$84.53
Mando Disc Brake Caliper
  • New OE Disc Brake Caliper, Direct Replacement
  • Disc Brake Caliper failures are not as common compared to brake pads replacements, but undoubtedly normal/heavy usage over time will cause wear and eventually failure. Failures may include brake fluid leakages or simply lockage of your brake pads – both are major safety concerns. Mando brand new OE brake calipers are same brake calipers as the original ones found on your vehicle. Mando calipers come factory coated as specified by Hyundai and Kia, which is especially important in the snowy-wet regions of the world. Don’t settle for just any value line brake caliper, replace proudly with Mando - We Are OE!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mando
Additional Fitment Information:
Vehicle
Mando
Disc Brake Caliper Mando

P311-4ACCC08    16A5276  New

Qty:
In Stock & Ready to Ship
$84.53
Mando Disc Brake Caliper
  • New OE Disc Brake Caliper, Direct Replacement
  • Disc Brake Caliper failures are not as common compared to brake pads replacements, but undoubtedly normal/heavy usage over time will cause wear and eventually failure. Failures may include brake fluid leakages or simply lockage of your brake pads – both are major safety concerns. Mando brand new OE brake calipers are same brake calipers as the original ones found on your vehicle. Mando calipers come factory coated as specified by Hyundai and Kia, which is especially important in the snowy-wet regions of the world. Don’t settle for just any value line brake caliper, replace proudly with Mando - We Are OE!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mando
Additional Fitment Information:
Vehicle
Raybestos
Disc Brake Caliper Raybestos

P311-3227B2A    FRCD12837N  New

19B7148 19B7149 , 19B714819B7149

Qty:
In Stock & Ready to Ship
$126.43
Raybestos Disc Brake Caliper
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Configuration: Semi-loaded
    • Manufacturing Type: New
    • Surface Finish: Plain

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Raybestos
Additional Fitment Information:
Vehicle
Raybestos
Disc Brake Caliper Raybestos

P311-450C9EE    RC11573  New

Qty:
In Stock & Ready to Ship
$60.00 $87.26
Raybestos Disc Brake Caliper
  • Product Attributes:
    • Bleeder Screw Thread: M10x1
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Aluminum
    • Caliper Configuration: Loaded
    • Friction Material: Hybrid
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Raybestos
Additional Fitment Information:
Vehicle
Raybestos
Disc Brake Caliper Raybestos

P311-1DD62A9    RC11574  New

Qty:
In Stock & Ready to Ship
$60.00 $87.26
Raybestos Disc Brake Caliper
  • Product Attributes:
    • Bleeder Screw Thread: M10x1
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Aluminum
    • Caliper Configuration: Loaded
    • Friction Material: Hybrid
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Raybestos
Additional Fitment Information:
Vehicle

Showing 1 - 8 of 8 Products for Disc Brake Caliper.