Finish Selecting Your Vehicle

Choose your Submodel for your 1988 Chrysler New Yorker

  • Base
  • Landau
  • Turbo

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Mando
    Mando
  • Raybestos
    Raybestos

Showing Products For 1988 Chrysler New Yorker Disc Brake Caliper

Below are all the different brands and applications for 1988 Chrysler New Yorker Disc Brake Caliper

Showing 1 - 10 of 21 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1988 Chrysler New Yorker Disc Brake Caliper - Front Left 4 Cyl 2.2L Cardone - Unloaded Caliper

P311-465654A    18-4178  Remanufactured

4238693 , 4313961

Qty:
In Stock & Ready to Ship
$7.20 $30.45
Cardone Disc Brake Caliper  Front Left
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.125
    • Piston Size (OD) (mm): 53.975
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1988 - Chrysler New Yorker Front Left L 4 Cyl 2.2L 135 -
Centric
1988 Chrysler New Yorker Disc Brake Caliper - Front Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-33A4AF0    141.63039  Remanufactured

Qty:
In Stock & Ready to Ship
$5.00 $26.52
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 0.375
      • 3/8"-24
    • Bore Size mm: 54
    • Bore Size(s) millimeters: 54
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Bracket Required Y/N: No
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.02190
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 0.4375
      • 0.438
      • 7/16"-20
    • Mounting Bracket Included: No
    • Pads Included: No
    • Piston 1 Diameter: 54.000
    • Piston 2 Diameter: 54.000
    • Piston Material: Phenolic
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Rear Brake Position
1988 - Chrysler New Yorker Turbo Drum Front Right
Cardone
1988 Chrysler New Yorker Disc Brake Caliper - Front Right 4 Cyl 2.2L Cardone - Unloaded Caliper

P311-50710F2    18-4177  Remanufactured

4238692 , 4313960

Qty:
In Stock & Ready to Ship
$7.20 $30.45
Cardone Disc Brake Caliper  Front Right
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.125
    • Piston Size (OD) (mm): 53.975
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1988 - Chrysler New Yorker Front Right L 4 Cyl 2.2L 135 -
Cardone
1988 Chrysler New Yorker Disc Brake Caliper - Front Right 6 Cyl 3.0L Cardone - Unloaded Caliper

P311-5CB4EA2    18-4335  Remanufactured

4383468

Qty:
In Stock & Ready to Ship
$37.60
Cardone Disc Brake Caliper  Front Right
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Size (OD) (in): 2.356
    • Piston Size (OD) (mm): 59.8424
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1988 - Chrysler New Yorker Front Right V 6 Cyl 3.0L 181 2972
Cardone
1988 Chrysler New Yorker Disc Brake Caliper - Front Left 6 Cyl 3.0L Cardone - Unloaded Caliper

P311-28FDA54    18-4336  Remanufactured

4383469

Qty:
In Stock & Ready to Ship
$37.60
Cardone Disc Brake Caliper  Front Left
  • with Phenolic Piston Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Phenolic
    • Piston Size (OD) (in): 2.356
    • Piston Size (OD) (mm): 59.8424
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1988 - Chrysler New Yorker Front Left V 6 Cyl 3.0L 181 2972
Centric
1988 Chrysler New Yorker Disc Brake Caliper - Front Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-4EE7877    141.63049  Remanufactured

Qty:
In Stock & Ready to Ship
$25.41
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 0.375
      • 3/8"-24
    • Bore Size mm: 60
    • Bore Size(s) millimeters: 60
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Bracket Required Y/N: No
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.04780
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 0.4375
      • 0.438
      • 7/16"-20
    • Mounting Bracket Included: No
    • Pads Included: No
    • Piston 1 Diameter: 60.000
    • Piston 2 Diameter: 60.000
    • Piston Material: Phenolic
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Submodel Rear Brake Position
1988 - Chrysler New Yorker Base Drum Front Right
Centric
1988 Chrysler New Yorker Disc Brake Caliper - Front Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-5829EA5    141.63050  Remanufactured

Qty:
In Stock & Ready to Ship
$25.41
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper with New Phenolic Pistons
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 0.375
      • 3/8"-24
    • Bore Size mm: 60
    • Bore Size(s) millimeters: 60
    • Bracket Included: No
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): No
    • Bracket Required Y/N: No
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.04780
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 0.4375
      • 0.438
      • 7/16"-20
    • Mounting Bracket Included: No
    • Pads Included: No
    • Piston 1 Diameter: 60.000
    • Piston 2 Diameter: 60.000
    • Piston Material: Phenolic
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Submodel Rear Brake Position
1988 - Chrysler New Yorker Base Drum Front Left
Raybestos
1988 Chrysler New Yorker Disc Brake Caliper - Front Right Raybestos - R-Line; Friction-Ready Caliper, Remanufactured

P311-1DC4824    FRC4180  New

04214L , 04238692 , 04313961 , 079-5030 , 10-1027S , 10-4172 , 11-4172 , 114214 , 12-4172 , 141.63039 , 142.63039 , 14213 , 16249 , 18-4177 , 18-4177S , 22-17634L , 40-83040 , 41-83039 , 4172 , 4213 , 4214 , 4238692 , 4313961 , 511117 , 5204213 , 52267 , 6197 , 6204180 , 6282 , 633043 , 643043 , 94214 , 99-17634B , C263 , C4177 , C9008 , CR01795 , CR110445P , CR110446 , CR1795 , L110446 , L511116M , L55277AM , L55277M , PP6197 , R55276 , R55277S , RC6197 , RC7163M , RL6198M , SC0244 , SL2035 , SL55277 , SLC263 , TQM25111

Qty:
In Stock & Ready to Ship
$8.00 $28.22
Raybestos Disc Brake Caliper  Front Right
  • R-Line; Friction-Ready Caliper, Remanufactured
  • Product Attributes:
    • Bleeder Screw Thread: 3/8"-24
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Cast Iron
    • Caliper Configuration: Semi-loaded
    • Caliper Piston Diameter:
      • 2.000
      • 50.800
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain
Brand: Raybestos
Position: Front Right
Additional Fitment Information:
Vehicle Aspiration Position
1988 - Chrysler New Yorker Turbocharged Front Right
Raybestos
1988 Chrysler New Yorker Disc Brake Caliper - Front Left Raybestos - R-Line; Friction-Ready Caliper, Remanufactured

P311-21A4CB7    FRC4291  New

04321L , 04383468 , 079-5023 , 10-1040S , 10-4020 , 11-4020 , 114253 , 12-4020 , 141.6305 , 141.63050 , 141.67018 , 142.6305 , 142.63050 , 142.67018 , 18-4336 , 18-4336S , 18571 , 40-83049 , 4020 , 4254 , 4264 , 4322 , 4383468 , 5204292 , 5312 , 6204291 , 6274 , 6297 , 633057 , 643058 , 94263 , 97-17638A , C308 , C4336 , CR02513 , CR119055 , CR2513 , L119055 , L119055A , L55530AM , L55530BM , L55530M , SC0245 , SL2042 , SL2043 , SL55530 , SLC308

Qty:
In Stock & Ready to Ship
$8.00 $27.00
Raybestos Disc Brake Caliper  Front Left
  • R-Line; Friction-Ready Caliper, Remanufactured
  • Product Attributes:
    • Bleeder Screw Thread: 3/8"-24
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Cast Iron
    • Caliper Configuration: Semi-loaded
    • Caliper Piston Diameter:
      • 2.000
      • 50.800
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain
Brand: Raybestos
Position: Front Left
Additional Fitment Information:
Vehicle Aspiration Position
1988 - Chrysler New Yorker Naturally Aspirated Front Left
Raybestos
1988 Chrysler New Yorker Disc Brake Caliper - Front Right Raybestos - R-Line; Friction-Ready Caliper, Remanufactured

P311-042C81C    FRC4292  New

04322L , 04383469 , 079-5024 , 10-1041S , 10-4021 , 11-4021 , 114254 , 12-4021 , 141.63049 , 141.67017 , 142.63049 , 142.67017 , 16357 , 18-4335 , 18-4335S , 18570 , 40-83050 , 4021 , 4253 , 4263 , 4321 , 4383469 , 5204291 , 5313 , 6204292 , 6273 , 6296 , 633058 , 643057 , 94264 , 97-17638B , C309 , C4335 , CR02514 , CR119054 , CR2514 , L119054 , L119054A , L55531AM , L55531BM , L55531M , SC0246 , SL2042 , SL2043 , SLC309

Qty:
In Stock & Ready to Ship
$8.00 $27.00
Raybestos Disc Brake Caliper  Front Right
  • R-Line; Friction-Ready Caliper, Remanufactured
  • Product Attributes:
    • Bleeder Screw Thread: 3/8"-24
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Cast Iron
    • Caliper Configuration: Semi-loaded
    • Caliper Piston Diameter:
      • 2.000
      • 50.800
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain
Brand: Raybestos
Position: Front Right
Additional Fitment Information:
Vehicle Aspiration Position
1988 - Chrysler New Yorker Naturally Aspirated Front Right

Showing 1 - 10 of 21 Products for Disc Brake Caliper.