1986 Subaru GL-10 Distributor Ignition - Cardone, Holley, MSD, Pertronix

1986 Subaru GL-10 Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-09BB2CE Manu # 31-853 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA053

Qty:

In Stock & Ready to Ship

Best Price: $296.77

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Optical
- E-Waste: Yes
- Electronic Module Supplied: No
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Aspiration	Block	Engine	CID	CC
1986 - Subaru GL-10	FWD	Naturally Aspirated	H	4 Cyl 1.8L	-	1781

1986 Subaru GL-10 Distributor 4 Cyl 1.8L Cardone - Distributor

Part # P311-4C6F732 Manu # 31-850 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 22100AA044 , 22100AA082 , 22100AA083 , 22100AA102 , 22100AA111 , 22100AA112 , 22100AA190 , 22100AA192 , 22100AA240 , 22100AA250 , 22100AA310

Qty:

In Stock & Ready to Ship

Core Price: $35.10 Best Price: $296.77

with California Emissions System Module not Supplied Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Cylinders: 4
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Drive Type	Block	Engine	CID	CC
1986 - Subaru GL-10	4WD	H	4 Cyl 1.8L	-	1781

Distributor MSD

Part # P311-05B983A Manu # 85501 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $486.07

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/Locked-Out Timing; Chevy V8; Bronze Gear; Red;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed Primarily For Race Applications w/No Mech. Advance
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Supplied w/0.006 in. Oversized Bronze Gear Installed
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Adj. slip collar mounting flange for engines w/modified deck hts.
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. Trigger signals are produced via a high-output magnetic pick-up. This pickup is extremely accurate and never requires adjustment. Since this distributor is designed primarily for race engines, an oversized (+.006) bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-05CCF92 Manu # 8485 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $489.45

VW Type 1 Billet Distributor
VW Type 1 Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Air Cooled;
Product Attributes:
- Distributor Type: Single Point
- Engine Make/Size: Vw Type 1
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- A performance upgrade designed for VW Type I air cooled engines
- Supplied w/Bolt Down Distributor Cap And Rotor
- Must Be Used w/An MSD Ignition Control
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- CNC machined billet aluminum housing and Dupont Rynite base
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- Maintenance-free magnetic pickup and precision reluctor
Using technology gained from building distributors for off-road and NASCAR racers, MSD offers this Billet Distributor for the popular Type 1 engine. A maintenance-free magnetic pickup is responsible for triggering the MSD Ignition. This pickup is accurate to within 1anddeg; at any rpm so you wont have to worry about points float or burbles at top end speeds. The pickup is triggered by a precision reluctor that is attached to a hardened steel shaft. For increased stability, a sealed ball bearing is used to guide the shaft. Since every engine application is different, the MSD Billet distributor features an easy-to-adjust mechanical advance assembly. By simply changing the advance springs and stop bushing you can tune in 24 different advance curves.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-45C1AE6 Manu # 85705 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $807.79

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chevy Engine; Must Be Used w/MSD 6/7/8/10 Ignition Box; Supplied w/Bronze Gear;
Product Attributes:
- Distributor Type: Hall-effect Pick Up
- Engine Make/Size:
  - Chevy Big Block (396-502)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Adj. slip collar mounting flange for engines w/modified deck hts.
- Billet reluctor/magnetic pickup produce accurate trigger signals
- Large diameter Ford style cap prevents spark scatter
- Securely bolts in place
- A Weather tight connector seals and locks the pickup wiring
- Pickup/Reluctor Parylene Coated for Resistance Against Corrosion
MSD is proud to offer a new Pro-Billet Distributor designed to handle the rigors and harsh racing conditions of late model, modified, and off-road racing. The new distributor was designed with input from top racers and engine builders in circle track competition.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-092F516 Manu # 8570 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $504.74

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Red; For Chevy V8;
Product Attributes:
- Distributor Type: Magnetic Pickup
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
- 3/8 in. Smaller/7/8 in. Shorter Than Conv. Chevy V-8 w/Points Cap
- Supplied w/small diameter HEI style distributor cap and rotor
- Will accept PN[8441] Cap-A-Dapt
- Will not accept a vacuum advance canister
- No CARB Exemption Order Number
- O-ring seals can be installed for oil press. control (Mods only)
- Must Be Used w/An MSD 6/7/8/10 Series Ignition
- Special oil tract improves lubrication to the dist./cam gear
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
This Distributor was designed for racers and street rodders that have space limitations due to firewall interference, blowers or oversized intake manifolds such as tunnel rams. The distributor is 3/8 narrower and almost 1 shorter than a standard distributor. Proven performance features include a high output magnetic pick-up and precision machined reluctor for accurate ignition triggering. A fully adjustable mechanical advance allows you to tailor the advance curve to your specific application. Topping it all off is our own small diameter cap. This is molded out of durable Rynite(R) material and comes with an optional wire retainer.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-2D70FA1 Manu # 8566 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $558.25

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Oldsmobile V8; Iron Gear;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Oldsmobile V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by 2 sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
Sharing the CNC machining techniques with the rest of the MSD Distributor line, the Olds housing is machined from high quality 6061-T6 aluminum. Adding to this strength are two sealed ball bearings that guide the 0.500 shaft accurately through 10,000+ rpm. TIG-welded on top of the polished steel shaft is MSDs adjustable mechanical advance assembly. To accurately trigger the ignition, a high-output magnetic pick-up is bolted to the base. This trigger pick-up produces a precise trigger signal. An MSD red cap with brass terminals and Race Rotor are supplied.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-3F00D6B Manu # 85561 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $393.99

Pro-Billet Distributor
Pro-Billet Distributor; w/Slip-Collar; Designed For Racing Blocks w/Maximum Increased Deck Height; Chevy V8; Iron Gear;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size:
  - Chevy Big Block (396-454)
  - Chevy Small Block (262-400)
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing and billet aluminum base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- O-ring seals can be installed for oil press. control (Mods only)
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by sealed ball bearings
If you have a slightly taller block or have decked the heads, the distance between the distributor mounting pad and the cam gear/oil pump drive may be different. MSD offers these Distributor with an adjustable slip collar with 1.5 of adjustment so you can be sure the distributor is installed correctly. The distributor shares the same features of the standard Pro-Billet Chevrolet model including a ball bearing guide, long sintered lower bushing and an oil seal. To trigger the MSD Ignition a maintenance-free magnetic pick-up is secured in the billet base of the distributor. Just above this pick-up assembly is an adjustable mechanical advance assembly.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-07D7303 Manu # 83506 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $778.85

Pro-Billet Marine Ready-To-Run Distributor
Pro-Billet Marine Ready-To-Run Distributor; Ford 351C-460; Iron Gear; Red;
Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size: Ford Marine 351c-460
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Only three wires to connect for a simple installation
- High output module produces quick starts/smooth idle/performance
- Accurate/maintenance-free magnetic pick-up never needs adjustment
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- No MSD Ignition control required
MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pick-up produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run Distributors are a breeze to install. Simply drop it in the engine and connect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and Weathertight wiring harness.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-5ED1F5F Manu # 83606 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $701.77

Pro-Billet Marine Ready-To-Run Distributor
Pro-Billet Marine Ready-To-Run Distributor; Chevy V8; Iron Gear; Red;
Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size: Chevy Marine V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Only three wires to connect for a simple installation
- High output module produces quick starts/smooth idle/performance
- Accurate/maintenance-free magnetic pick-up never needs adjustment
- Adjust The Mechanical Adv. w/Supplied Springs/Stop Bushings
- Now includes built-in Rev Limiter
MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run distributors are a breeze to install. Simply drop it into the engine and contect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and weathertight wiring harness.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1986 Subaru GL-10 Distributor