802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Submodel for your 1986 Chevrolet Caprice

  • Base
  • Classic
  • Classic Brougham

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • Weiand
    Weiand

Showing Products For 1986 Chevrolet Caprice Engine Intake Manifold

Below are all the different brands and applications for 1986 Chevrolet Caprice Engine Intake Manifold

Showing 1 - 10 of 19 Products for Engine Intake Manifold.

Refine Your Search

Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer EPS Intake Manifold

P311-513408C    27014  New

Qty:
$371.58
Edelbrock Engine Intake Manifold
  • E-SHINE 2701 SBC PERF EPS INTAKE
  • ; Endurashine(TM); Idle-5500 rpm; Non-EGR; Dual-Plane Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • Performer EPS Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27". Port exit dimensions: 1.15" x 1.87". Camshaft Recommendations: #2102, #2103, #2208, #2209
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Classic V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer Series Air-Gap Intake Manifold

P311-0C5ED71    2601  New

Qty:
$350.19
Edelbrock Engine Intake Manifold
  • SB CHEVY PERFORMER AIR GAP MANIFOLD
  • ; Satin Finish; 4 bbl Carb; Idle-5500 rpm; Non-EGR Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • Performer Series Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Performer Air-Gap Series Intake Manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, the Performer Air-Gap features the air-gap design for the ultimate street performance in the idle to 5500 rpm range.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Classic V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.7L Edelbrock - Torker II Series Intake Manifold

P311-42407D5    5001  New

Qty:
$251.39
Edelbrock Engine Intake Manifold
  • TORKER II MANIFOLD
  • ; Non-EGR; 2500-6500rpm; 4 bbl Carb Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Will Fit Corvette and 87 and Later Stock Heads
  • Torker II Series Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: 2500-6500
    • Usage: Racing
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for 1955-86 high-performance street 262-400 c.i.d. small-block Chevys. Will fit Corvette and '87 and later stock heads. Accepts late-model water neck, air-conditioning, alternator and H.E.I. Will not fit '87 and later cast iron heads and will not cover port openings of Chevrolet Bowtie or LT1 heads. Not for heavy vehicles (trucks, vans etc.); use Performer EPS #2701. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 600-800 cfm, use bracket #8031 or #8036 for 1972-78. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold height: A-3.53",B-4.63"; Carb pad height: 4.08" (see pages 81-82). Port exit dimensions: 1.09" x 1.73". Camshaft Recommendations: Torker Plus #5002.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Base V 8 Cyl 5.7L 350 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - RPM Air-Gap Intake Manifold

P311-387D993    75013  New

Qty:
$469.22
Edelbrock Engine Intake Manifold
  • INTAKE MANIFOLD PERF RPM AIR GAP SB CHEV. W/BLK POWDER COAT FINISH
  • ; Black; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only Recommend Edelbrock Gasket PN[7201] for Manifold Gasket~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Base V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer EPS Intake Manifold

P311-52D503E    2701  New

Qty:
$169.77
Edelbrock Engine Intake Manifold
  • MANIFOLD; SBC PERFORMER EPS INTAKE
  • ; Cast Finish; Idle-5500 rpm; Non-EGR; Dual-Plane Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • Performer EPS Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27". Port exit dimensions: 1.15" x 1.87". Camshaft Recommendations: #2102, #2103, #2208, #2209
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Base V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer EPS Intake Manifold

P311-00FB9BF    2703  New

Qty:
$273.93
Edelbrock Engine Intake Manifold
  • INTAKE MANIFOLD PERF EPS SBC W/OIL FILL TUBE/BREATHER
  • ; Cast Finish; Idle-5500rpm; Non-EGR; Dual-Plane; w/Oil Fill Tube Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • Performer EPS Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: Idle -5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. ** Carburetor Recommendations: Edelbrock Thunder Series AVS or Performer Series carb, 500-650 cfm. Installation Notes: Recommended intake gasket: Edelbrock #7201. Manifold ht: A-3.74", B-4.80"; Carb pad height: 4.27". Port exit dimensions: 1.15" x 1.87". Camshaft Recommendations: #2102, #2103, #2208, #2209
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Classic V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - RPM Air-Gap Intake Manifold

P311-3902D32    75014  New

Qty:
$501.79
Edelbrock Engine Intake Manifold
  • E-SHINE 7501 SBC RPM AIR-GAP INTAKE
  • ; Endurashine(TM); 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only Recommend Edelbrock Gasket PN[7201] for Manifold Gasket~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Classic V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - RPM Air-Gap Intake Manifold

P311-3AE176F    7501  New

Qty:
$344.85
Edelbrock Engine Intake Manifold
  • S/B CHEVY RPM AIR-GAP INTAKE
  • ; Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR; For Square-Bore Carbs; Street/Hi Perf. Use Only Recommend Edelbrock Gasket PN[7201] for Manifold Gasket~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • RPM Air-Gap Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Base V 8 Cyl 5.0L 305 -
Edelbrock
1986 Chevrolet Caprice Engine Intake Manifold 8 Cyl 5.0L Edelbrock - Performer RPM Intake Manifold

P311-3247F26    7101  New

Qty:
$268.25
Edelbrock Engine Intake Manifold
  • PERFORMER RPM MANIFOLD
  • ; Cast Finish; 4 bbl Carb; 1500-6500rpm; Non-EGR Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ For Pre-Pollution Controlled Or Race Use Or Engine Swaps
  • Performer RPM Intake Manifold
  • Product Attributes:
    • Cylinder Head Type: Chevy Small Block
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block (262-400)
    • Number of Carbs: One
    • Position: N/a
    • RPM Range: 1500-6500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for 1955-86 262-400 c.i.d. Chevy V8s for maximum power and a broad torque curve for high-performance street/marine. Provides power like a single-plane and throttle response like a dual-plane. Has provisions to add oil fill tube.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1986 - Chevrolet Caprice Classic V 8 Cyl 5.0L 305 -
Weiand
1986 Chevrolet Caprice Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Speed Warrior(TM) Intake Manifold

P311-1BCF854    8150  New

Qty:
$205.73
Weiand Engine Intake Manifold  Lower
  • MANIFOLD-SBC SPEED WARRIOR
  • ; Power Band 1500-6700 RPM; High-Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish Legal Only For Off-Highway Use Or Racing
  • Speed Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Finish: Satin
    • Front Height: 4.190 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Position: Lower
    • Rear Height: 5.270 In.
    • RPM Range: 1500-6700
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • The Weiand Speed Warrior features long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. All of this usable power makes this intake perfect for your street and strip hot rod! Weiand developed the first ever aluminum intake manifold in 1937. Thirty years later Weiand developed complete blower drives for the GMC 6–71 supercharger. Today, Weiand is still at the forefront of intake manifold and blower development as well as high flow water pumps. To make more power you have to get more air to your engine. Look to Weiand as your power source! *** Utilizes late model alternator an A/C bracket mounting provisions. Has additional vacuum tap off of runner. Recommended intake manifold gasket - Mr Gasket #'s 5821 or 101G ** Plenum depth: From the carb flange to the bottom of the upper plenum is 2-3/16". To the bottom of the lower plenum is 4-1/16".
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1986 - Chevrolet Caprice Lower V 8 Cyl 5.0L 305 -

Showing 1 - 10 of 19 Products for Engine Intake Manifold.