Finish Selecting Your Vehicle

Choose your Submodel for your 1985 Cadillac Fleetwood

  • 75
  • 75 Formal
  • Base
  • Brougham
  • Brougham d'Elegance
  • d'Elegance

Shop By Brand

The Following brands are available based on your search.

  • AP Exhaust
    AP Exhaust
  • BBK Performance
    BBK Performance
  • Borla
    Borla
  • Dynomax
    Dynomax
  • FlowTech
    FlowTech
  • Flowmaster
    Flowmaster
  • Gibson
    Gibson
  • Hooker
    Hooker
  • MBRP Exhaust
    MBRP Exhaust
  • Magnaflow
    Magnaflow
  • Pypes Performance exhaust
    Pypes Performance exhaust
  • SLP Performance
    SLP Performance
  • Stainless Works
    Stainless Works
  • Vibrant Performance
    Vibrant Performance
  • Walker Exhaust
    Walker Exhaust

Showing Products For 1985 Cadillac Fleetwood Exhaust Muffler

Below are all the different brands and applications for 1985 Cadillac Fleetwood Exhaust Muffler

Showing 1 - 10 of 346 Products for Exhaust Muffler.

Refine Your Search

AP Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 8 Cyl 5.7L AP Exhaust

P311-177886A    700056  New

Qty:
In Stock & Ready to Ship
$45.35
AP Exhaust Exhaust Muffler
  • Muffler - MSL Maximum
  • DIRECT FIT MSL/MAXIMUM Muffler
  • Muffler - MSL Maximum; Oval Body - H4.06" X W10.5" X L18"; 22.5" OAL; 2.25" ID Config. O/OO
  • Product Attributes:
    • Body Height: 4.06
    • Body Length: 18
    • Body Material: Aluminized Steel
    • Body Width: 10.5
    • Grade Type: Regular
    • Heat Shield Attached: No
    • Inlet Inside Diameter: 2.25
    • Inlet Location: Right Center
    • Inlet Type: Pipe
    • Muffler Configuration: O/oo
    • Muffler Type: Baffled
    • Outlet Inside Diameter: 2.25
    • Outlet Location: Left Center
    • Outlet Type: Pipe
    • Overall Length: 22.5
    • Shape: Oval
    • Sound Level: Oe Comparable
    • Tunable: No
Brand: AP Exhaust
Additional Fitment Information:
Vehicle Submodel Drive Type Engine VIN Block Engine CID CC
1985 - Cadillac Fleetwood Brougham RWD N V 8 Cyl 5.7L 350 -
AP Exhaust
1985 Cadillac Fleetwood Exhaust Muffler - Front 8 Cyl 4.1L AP Exhaust

P311-177886A    700056  New

Qty:
In Stock & Ready to Ship
$45.35
AP Exhaust Exhaust Muffler  Front
  • Muffler - MSL Maximum
  • DIRECT FIT MSL/MAXIMUM Muffler
  • Muffler - MSL Maximum; Oval Body - H4.06" X W10.5" X L18"; 22.5" OAL; 2.25" ID Config. O/OO
  • Product Attributes:
    • Body Height: 4.06
    • Body Length: 18
    • Body Material: Aluminized Steel
    • Body Width: 10.5
    • Grade Type: Regular
    • Heat Shield Attached: No
    • Inlet Inside Diameter: 2.25
    • Inlet Location: Right Center
    • Inlet Type: Pipe
    • Muffler Configuration: O/oo
    • Muffler Type: Baffled
    • Outlet Inside Diameter: 2.25
    • Outlet Location: Left Center
    • Outlet Type: Pipe
    • Overall Length: 22.5
    • Shape: Oval
    • Sound Level: Oe Comparable
    • Tunable: No
Brand: AP Exhaust
Position: Front
Additional Fitment Information:
Vehicle Submodel Drive Type Engine VIN Position Block Engine CID CC
1985 - Cadillac Fleetwood Brougham RWD 8 Front V 8 Cyl 4.1L 250 -
Walker Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 8 Cyl 4.1L Walker Exhaust - Walker SoundFX Direct Fit Muffler

P311-4BDD5B9    18234  New

700172

Qty:
In Stock & Ready to Ship
$49.72
Walker Exhaust Exhaust Muffler
  • SoundFX Exhaust Muffler
  • If welded assembly, replace all required parts
  • SoundFX, Aluminized, Specific Fit, Inlet - 2.25 Offset, Outlet - 2 Offset
  • Walker SoundFX Direct Fit Muffler
  • Product Attributes:
    • Body Height: 4.25
    • Body Length: 19
    • Body Material: Steel
    • Body Width: 9.75
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 2.25
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 2.25
    • Inlet Offset: 2.875
    • Inlet Type: Pipe Connection
    • Muffler Type: Combination
    • Outlet 1 Inside Diameter: 2
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 2
    • Outlet Type: Pipe Connection
    • Overall Length: 23
    • Reversible: No
    • Shape: Oval
    • Tunable: No
  • Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Submodel Drive Type Block Engine CID CC
1985 - Cadillac Fleetwood 75 Formal FWD V 8 Cyl 4.1L 250 -
Walker Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 8 Cyl 4.1L Walker Exhaust - Walker SoundFX Direct Fit Muffler

P311-5A4352F    18235  New

6578 , 700056 , 700218 , 700358

Qty:
In Stock & Ready to Ship
$50.15
Walker Exhaust Exhaust Muffler
  • SoundFX Exhaust Muffler
  • SoundFX, Aluminized, Specific Fit, Inlet - 2.25 Offset, Outlet - 2.25 Offset
  • Walker SoundFX Direct Fit Muffler
  • Product Attributes:
    • Body Height: 4.25
    • Body Length: 18
    • Body Material: Steel
    • Body Width: 9.75
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 2.25
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 2.25
    • Inlet Offset: 2.875
    • Inlet Type: Pipe Connection
    • Muffler Type: Combination
    • Outlet 1 Inside Diameter: 2.25
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 2.25
    • Outlet Type: Pipe Connection
    • Overall Length: 23
    • Reversible: No
    • Shape: Oval
    • Tunable: No
  • Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1985 - Cadillac Fleetwood Brougham d'Elegance V 8 Cyl 4.1L 250 -
Walker Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 6 Cyl 4.3L Walker Exhaust - Walker SoundFX Universal Muffler

P311-23295BE    18105  New

Qty:
In Stock & Ready to Ship
$49.59
Walker Exhaust Exhaust Muffler
  • SoundFX Exhaust Muffler
  • with 18 (in) Muffler Body Modifications and/or Additional Parts May Be Required for Installation
  • SoundFX Universal, Aluminized, Universal Fit, Inlet - 2 Offset, Outlet - 2 Offset
  • Walker SoundFX Universal Muffler
  • Product Attributes:
    • Body Height: 4.25
    • Body Length: 18
    • Body Material: Steel
    • Body Width: 8.813
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 2
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 2
    • Inlet Offset: 2.625
    • Inlet Type: Pipe Connection
    • Muffler Type: Combination
    • Outlet 1 Inside Diameter: 2
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 2
    • Outlet Type: Pipe Connection
    • Overall Length: 24.5
    • Reversible: No
    • Shape: Oval
    • Tunable: No
  • Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Drive Type Block Engine CID CC
1985 - Cadillac Fleetwood FWD V 6 Cyl 4.3L 260 -
Walker Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 8 Cyl 4.1L Walker Exhaust - Walker SoundFX Universal Muffler

P311-40B9AD9    18141  New

5528

Qty:
In Stock & Ready to Ship
$46.38
Walker Exhaust Exhaust Muffler
  • SoundFX Exhaust Muffler
  • Modifications and/or Additional Parts May Be Required for Installation
  • SoundFX Universal, Aluminized, Universal Fit, Inlet - 2.25 Offset, Outlet - 2.25 Offset
  • Walker SoundFX Universal Muffler
  • Product Attributes:
    • Body Height: 4.25
    • Body Length: 18
    • Body Material: Steel
    • Body Width: 8.813
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 2.25
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 2.25
    • Inlet Offset: 2.625
    • Inlet Type: Pipe Connection
    • Muffler Type: Combination
    • Outlet 1 Inside Diameter: 2.25
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 2.25
    • Outlet Type: Pipe Connection
    • Overall Length: 23
    • Reversible: No
    • Shape: Oval
    • Tunable: No
  • Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX® universal mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1985 - Cadillac Fleetwood Brougham d'Elegance V 8 Cyl 4.1L 250 -
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-59D9865    MVR13  New

Qty:
In Stock & Ready to Ship
$116.94
  • Race Pro 14in. 2.5in. off/center
  • Race Pro 14in. 2.5in. off/center
  • Product Attributes:
    • Body Height: N/a
    • Body Length: 14.000 In.
    • Body Width: N/a
    • Inlet Connection Type: Clamp-on
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Center
    • Outlet Type: Single Center Outlet
    • Overall Length: 14.000 In.
    • Shape: Rectangular
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • Race Pro Muffler
  • Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Race Pro Muffler. This baby features a 'straight through' path that guarantees throughput that's 99% of straight tubing! The sound is surprisingly calm considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pros aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of rock wool before the unit is sealed. Highly recommended for the track where every 1/10th counts. Of course, there are plenty of these mufflers hidden under some fine street machines too. Not recommended on lower horsepower vehicles as low end torque may suffer. Think of these mufflers as large inhalers for your engine. The welded case makes for a sturdy muffler that will not rattle. The stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. 409 Stainless steel construction resists corrosion. Welded case ensures long life and no rattle. 5 unique designs. One will match your needs! Limited Lifetime Warranty. Sound Rating = [7.0].

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-33532FD    MVR200S  New

Qty:
In Stock & Ready to Ship
$86.31
Pypes Performance exhaust Exhaust Muffler
  • M-80 2.5in. round STNLS
  • M-80 2.5in. round STNLS
  • Product Attributes:
    • Body Length: 14.000 In.
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Center
    • Inlet Type: Single Center
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Center
    • Outlet Type: Single Center Outlet
    • Overall Length: 14.000 In.
    • Shape: Round
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • 2.5 in. M-80 Muffler
    • 304 Polished Stainless
  • Sometimes you just gotta have the best of everything. When it comes to flow, you just can't get anything better than our Race Pro Muffler. This baby features a 'straight through' path that guarantees throughput that's 95% of straight tubing! The sound is surprisingly tame considering the absence of any impedance when you look down its barrel. At idle and low rpm cruising, you will not draw much attention, but upon acceleration, bystanders lookout! The Race Pros aggressive sound is the result of applying a layer of stainless mesh around a unique internal 3.5 in. perforated tube, accompanied by a healthy stuffing of rockwool insulation before the unit is sealed. Highly recommended for the track where every 1/10th counts. This 4 in. round version is also great for many street rod applications. Think of these mufflers as large inhalers for your engine. The welded case makes for a sturdy muffler that will not rattle. The stainless construction of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Stainless steel construction resists corrosion. Welded case ensures long life and no rattle. 5 unique designs. One will match your needs! Limited Lifetime Warranty.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Pypes Performance exhaust
Exhaust Muffler Pypes Performance exhaust

P311-3F45EAC    MVS10  New

Qty:
In Stock & Ready to Ship
$117.03
  • Street Pro 14in. 2.5in. off/off
  • Street Pro 14in. 2.5in. off/off
  • Product Attributes:
    • Body Height: N/a
    • Body Length: 14.000 In.
    • Body Width: N/a
    • Inlet Connection Type: Clamp-on
    • Inlet Inside Diameter: 2.500 In.
    • Inlet Outside Diameter: 2.500 In.
    • Inlet Position: Offset
    • Inlet Type: Single Offset
    • Main Piping Diameter: 2.500 In.
    • Muffler Count: 1
    • Outlet Outside Diameter: 2.500 In.
    • Outlet Position: Offset
    • Outlet Type: Single Offset
    • Overall Length: 14.000 In.
    • Shape: Rectangular
    • Tip Quantity: 0
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals; Including Hexavalent Chromium Which Is Known To The State Of California To Cause Cancer; Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov
  • Features:
    • Stainless Steel Construction Resists Corrosion
    • Welded Case Ensures Long Life And No Rattle
    • Designed To Match Your Needs
    • Limited Lifetime Warranty
    • Highly Recommended For The Track Where Every 1/10th Counts
    • Welded Case Makes For A Sturdy Muffler That Will Not Rattle
    • Resists Corrosion
    • Superior Flow Improves Gas Mileage
    • Delivers The Ultimate In Sound And Performance
    • Street Pro Muffler
  • Don't let the looks of this muffler fool you. Although at idle, you may cause passengers to immediately reach for their seat belts, upon acceleration, a smooth authoritative tone turns apprehension into a reassuring confidence. This is a great street/strip muffler that will maintain its rich sound qualities for the life of the muffler because there is no filler to burn off. Recommended for stock to medium modified vehicles where an aggressive sound is appreciated but not advertised. Designed with acoustics in mind, these resonance chambers create the unique sound of this muffler and keep it that way for years to come. The welded case makes for a sturdy muffler that will not rattle. The aluminizing and seam-coating treatment of our mufflers enables them to resist corrosion and extends the lifespan of the product, while their superior flow improves gas mileage. Pypes mufflers, when used as a Pypes system component, can be precision matched to deliver the ultimate in sound and performance. Sound Rating = [7.0]

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Pypes Performance exhaust
Additional Fitment Information:
Vehicle
Walker Exhaust
1985 Cadillac Fleetwood Exhaust Muffler 8 Cyl 4.1L Walker Exhaust - Walker Quiet-Flow SS Muffler

P311-10744F7    22317  New

2356 , 2977 , 2995 , 3439

Qty:
In Stock & Ready to Ship
Walker Exhaust Exhaust Muffler
  • Quiet-Flow Exhaust Muffler
  • Premium Limited Lifetime Warranty
  • Quiet-Flow SS, Aluminized, Specific Fit, Inlet - 2.25 Offset, Outlet - 2.25 Offset
  • Walker Quiet-Flow SS Muffler
  • Product Attributes:
    • Body Height: 4.25
    • Body Width: 9.75
    • Grade Type: Regular
    • Inlet 1 Inside Diameter: 2.25
    • Inlet 1 Type: Pipe Connection
    • Inlet Configuration: Offset
    • Inlet Inside Diameter: 2.25
    • Inlet Offset: 2.875
    • Inlet Type: Pipe Connection
    • Muffler Type: Combination
    • Outlet 1 Inside Diameter: 2.25
    • Outlet 1 Type: Pipe Connection
    • Outlet Configuration: Offset
    • Outlet Inside Diameter: 2.25
    • Outlet Type: Pipe Connection
    • Overall Length: 23
    • Reversible: No
    • Shape: Oval
    • Tunable: No
  • The only broad-market muffler with 100% stainless-steel construction, Walker® Quiet-Flow® SS mufflers feature precision fit, superior flow and OE-style sound. Quiet-Flow SS mufflers are available for most domestic and import vehicles.
Brand: Walker Exhaust
Additional Fitment Information:
Vehicle Submodel Block Engine CID CC
1985 - Cadillac Fleetwood Brougham d'Elegance V 8 Cyl 4.1L 250 -

Showing 1 - 10 of 346 Products for Exhaust Muffler.