1984 Plymouth Voyager Power Steering Pump Steering - BBB Industries, Borgeson, Cardone, Mapco, Maval, Tuff Stuff Performance Accessories

1984 Plymouth Voyager Power Steering Pump Mapco

Part # P311-4D2B26E Manu # 9726M Condition: New

This Part Fits the Following OEM/Substitute Numbers: 26028563 , 6444NR

Qty:

In Stock & Ready to Ship

Core Price: $35.00 Best Price: $68.04

POWER STEERING PUMP
Pulley needs to be transferred with proper pulley removal/install toll.

Brand: Mapco

Vehicle
1984 - Plymouth Voyager

1984 Plymouth Voyager Power Steering Pump BBB Industries - Reman Power Steering Pump

Part # P311-42B3091 Manu # 731-0128 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 19318692

Qty:

In Stock & Ready to Ship

Core Price: $20.00 Best Price: $62.82

w/o Reservoir
Reman Power Steering Pump
Product Attributes:
- Filter Included: No
- Inlet Attachment Type: Reservoir
- Installation Kit Included: Yes
- Outlet Thread Size: M16x1.50
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Cap Included: No
- Reservoir Included: No
- Sensor Included: No

Brand: BBB Industries

Vehicle
1984 - Plymouth Voyager

1984 Plymouth Voyager Power Steering Pump BBB Industries - Reman Power Steering Pump

Part # P311-42F70AB Manu # 731-2143 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 19319792

Qty:

In Stock & Ready to Ship

Core Price: $12.00 Best Price: $65.09

with Reservoir; ** Reservoir Units Are Recommended Replacement **
Reman Power Steering Pump
Product Attributes:
- Inlet Attachment Type: Reservoir
- Inlet Diameter: 0.379
- Inlet Size: 0.379
- Installation Kit Included: Yes
- Outlet Thread Size: M16x1.50
- Pulley Attachment Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Cap Included: No
- Reservoir Included: Yes
- Sensor Included: No

Brand: BBB Industries

Vehicle
1984 - Plymouth Voyager

1984 Plymouth Voyager Power Steering Pump Cardone - w/o Reservoir

Part # P311-1A550B0 Manu # W0133-2227990 Condition: Remanufactured

Qty:

In Stock & Ready to Ship

Core Price: $14.00 Best Price: $87.75

Remanufactured
w/o Reservoir

Brand: Cardone

Vehicle
1984 - Plymouth Voyager

1984 Plymouth Voyager Power Steering Pump Cardone - Power Steering Pump

Part # P311-539263D Manu # 20-863 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 1387724 , 13877246 , 3815956 , 3815982 , 4333367 , 49110W2405 , 5274221 , 53009761 , 8936288 , 8943359

Qty:

In Stock & Ready to Ship

Best Price: $53.88

Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Power Steering Pump
Product Attributes:
- E-Waste: No
- FAQs:
  - A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
  - I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
  - I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
  - Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
  - The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
  - The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
  - There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
  - Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
  - Why Is The Pump Making A Whining Noise All Of The Time?
  - Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
- Features and Benefits:
  - All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
  - All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
  - Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
- Hose Port Type: O-ring
- Housing Material: Cast Iron
- Mounting Hardware Included: No
- Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
- Power Steering Outlet ID Size: 0
- Power Steering Outlet Thread Size: 16x1.5
- Power Steering Pump Inlet Attachement Type: Hose Barb
- Power Steering Pump Outlet Attachment Type: Threaded
- Power Steering Reservoir Cap Included: No
- Product Condition: Remanufactured
- Pulley Attachement Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Included: No
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle
1984 - Plymouth Voyager

1984 Plymouth Voyager Power Steering Pump Cardone - Power Steering Pump

Part # P311-078AA40 Manu # 20-7833 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 3815956 , 4333367 , 5274221

Qty:

In Stock & Ready to Ship

Core Price: $10.80 Best Price: $53.88

Reservoir Included In-Line Filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
Power Steering Pump
Product Attributes:
- E-Waste: No
- FAQs:
  - A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
  - I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
  - I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
  - Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
  - Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
  - The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
  - The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
  - Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
  - Why Is The Pump Making A Whining Noise All Of The Time?
  - Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
- Features and Benefits:
  - All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
  - All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
  - As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
  - Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
  - Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
  - Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
  - Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
- Hose Port Type: O-ring
- Housing Material: Cast Iron
- Mounting Hardware Included: No
- Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
- Power Steering Outlet ID Size: 0
- Power Steering Outlet Thread Size: 16x1.5
- Power Steering Pump Inlet Attachement Type: Hose Barb
- Power Steering Pump Outlet Attachment Type: Threaded
- Power Steering Reservoir Cap Included: No
- Product Condition: Remanufactured
- Pulley Attachement Type: Press-on
- Pulley Included: No
- Remote Reservoir: No
- Reservoir Included: Yes
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Brand: Cardone

Vehicle
1984 - Plymouth Voyager

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-4EDB934 Manu # 6175AL-7 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $166.73

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; GM Pressure Slip; 8mm Through Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-2135F81 Manu # 6175AL-2 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $178.98

Type II Alum. Power Steering Pump
Type II Alum. Power Steering Pump; An-6 And AN-10 Fittings; M8x1.25 Threaded Hole Mounting; Aluminum; For Street Rods/Custom Vehicles w/Limited Engine Space; Factory Cast PLUS+;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Compact Size Ideal For Tight Applications
- Requires A Press Fit Pulley Not Included
- 1200 PSI Rated To Work With Most Gear Boxes
- 3 GPM Flow
- Top Pressure Port
- Clockwise Rotation Only
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Power Steering Pump Tuff Stuff Performance Accessories

Part # P311-2AA7DBB Manu # 6174A Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $229.90

Saginaw Style Power Steering Pump
Saginaw Style Power Steering Pump; Univ. Fit; 5/8 in. Keyed Shaft; 850 PSI; 5/8-18 SAE Pressure Fittings; 3/8 in.-16 Mtg. Holes; Chrome;
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm – Www.p65warnings.ca.gov
Features:
- Includes Reservoir/Pump Assembly/Billet Cap/Dipstick/Hardware
- Requires A Bolt On Pulley Which Is Not Included
- Clockwise Rotation Only
- 850 PSI Rating
- 2 GPM Flow
- 100% New Components
- Made In The U.S.A.
Our GM Saginaw style pump features all new components including reservoir and pump assembly. Includes billet chrome cap, new dipstick and hardware. Pumps are 1200 PSI rated to work with most gearbox systems, 850 PSI valve available for Mustang II rack and pinion available upon request. Our Type II compact size pump is ideal for tight installations. For use with factory or remote reservoir tank depending upon part number. Pumps are rated at 1200 PSI rating, 850 PSI valve available upon request. Perfect for street rods and custom vehicles with limited engine space. Pumps are available in chrome plated, various colors and plain, as cast finishes.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: Tuff Stuff Performance Accessories

Vehicle

Shop By Brand

Showing Products For 1984 Plymouth Voyager Power Steering Pump