Finish Selecting Your Vehicle

Choose your Engine for your 1984 Nissan Sentra

  • 4 Cyl 1.6L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Mando
    Mando
  • Raybestos
    Raybestos

Showing Products For 1984 Nissan Sentra Disc Brake Caliper

Below are all the different brands and applications for 1984 Nissan Sentra Disc Brake Caliper

Showing 1 - 10 of 14 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1984 Nissan Sentra Disc Brake Caliper - Front Right Cardone - Unloaded Caliper w/Bracket

P311-15C7271    19-B870  Remanufactured

4100105A90RE , 4100161A01RE

Qty:
In Stock & Ready to Ship
$33.95
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied with Mounting Bracket Installation Hardware Included
  • Unloaded Caliper w/Bracket
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Bracket; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 48.0822
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Fuel Type Position
1984 - Nissan Sentra GAS Front Right
Centric
1984 Nissan Sentra Disc Brake Caliper - Front Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-569BEF3    141.42048  Remanufactured

Qty:
In Stock & Ready to Ship
$29.70
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Abutment Clips Included: Yes
    • Attribute ID (Type): California Proposition 65
    • Bleeder Screw Included: Yes
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Include: No
    • Bracket Required (Y/N): Yes
    • Bracket Required Y/N: Yes
    • Caliper & Pad Hardware Include: Yes
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.02750
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.0
    • Mounting Bracket Included: Yes
    • Pads Included: No
    • Piston 1 Diameter: 48.000
    • Piston 2 Diameter: 48.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
    • Rust Preventative Coating: Yes
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Body Fuel Type Position
1984 - Nissan Sentra Wagon DIESEL Front Left
Cardone
1984 Nissan Sentra Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-52F391C    19-871  Remanufactured

4101105A90RE , 4101161A01RE

Qty:
In Stock & Ready to Ship
$44.60
Cardone Disc Brake Caliper  Front Left
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 48.0822
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Fuel Type Position
1984 - Nissan Sentra GAS Front Left
Cardone
1984 Nissan Sentra Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-408CFC7    19-870  Remanufactured

4100105A90RE , 4100161A01RE

Qty:
In Stock & Ready to Ship
$44.60
Cardone Disc Brake Caliper  Front Right
  • with Metal Piston Supplied without Mounting Bracket Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.0
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.0
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: No
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (mm): 48.0822
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Fuel Type Position
1984 - Nissan Sentra GAS Front Right
Raybestos
1984 Nissan Sentra Disc Brake Caliper - Front Right Raybestos - R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket

P311-51FEB83    FRC3741  New

141.42043 , 19-B702 , 19-B703 , 99-00519B , SC0669 , SC0797

Qty:
In Stock & Ready to Ship
$8.00 $30.44
Raybestos Disc Brake Caliper  Front Right
  • R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
  • Product Attributes:
    • Bleeder Screw Thread: M10x1
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Cast Iron
    • Caliper Configuration: Semi-loaded
    • Caliper Piston Diameter:
      • 2.000
      • 50.800
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain
Brand: Raybestos
Position: Front Right
Additional Fitment Information:
Vehicle Fuel Type Position
1984 - Nissan Sentra DIESEL Front Right
Raybestos
1984 Nissan Sentra Disc Brake Caliper - Front Left Raybestos - R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket

P311-4112A36    FRC3742  New

141.42044 , 99-00519A , SC0670 , SC0798

Qty:
In Stock & Ready to Ship
$8.00 $30.44
Raybestos Disc Brake Caliper  Front Left
  • R-Line; Friction-Ready Caliper, Remanufactured; Includes Bracket
  • Product Attributes:
    • Bleeder Screw Thread: M10x1
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Nickel, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Caliper Casting Material: Cast Iron
    • Caliper Configuration: Semi-loaded
    • Caliper Piston Diameter:
      • 2.000
      • 50.800
    • Manufacturing Type: Remanufactured
    • Surface Finish: Plain
Brand: Raybestos
Position: Front Left
Additional Fitment Information:
Vehicle Fuel Type Position
1984 - Nissan Sentra DIESEL Front Left
BBB Industries
1984 Nissan Sentra Disc Brake Caliper - Front Right 4 Cyl 1.6L BBB Industries - Reman Caliper with Installation Hardware

P311-45A340F    99-00524B  Remanufactured

Qty:
In Stock & Ready to Ship
$6.00 $29.39
BBB Industries Disc Brake Caliper  Front Right
  • Supplied with Mounting Bracket
  • Reman Caliper with Installation Hardware
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: M10-1.0 X 35
    • Bleeder Screw Thread (in): 7/16-20
    • Bleeder Thread Size: M10-1.0
    • Bracket Included: Yes
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: Rust Preventative
    • Caliper Slides Included: Yes
    • Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 47s, T3, R
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (mm): M10-1.0 X 23.4
    • Inlet Thread Size: M10-1.0
    • Pads Included: No
    • Piston Material: Steel
    • Piston Outside Diameter (in): 2
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Fuel Type Position Block Engine CID CC
1984 - Nissan Sentra GAS Front Right L 4 Cyl 1.6L 97 1597
Cardone
1984 Nissan Sentra Disc Brake Caliper - Front Right 4 Cyl 1.6L Cardone - Unloaded w/o Bracket

P311-4CE717D    W0133-1625221  New

Qty:
In Stock & Ready to Ship
$8.00 $96.35
Cardone Disc Brake Caliper  Front Right
  • Cardone/OEF3 Reman
  • Friction Ready - with Installation Hardware w/o Bracket
  • Unloaded w/o Bracket
  • Front - Right
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1984 - Nissan Sentra Front Right L 4 Cyl 1.6L 97 1597
Cardone
1984 Nissan Sentra Disc Brake Caliper - Front Left 4 Cyl 1.6L Cardone - Unloaded w/o Bracket

P311-316EE88    W0133-1726114  New

Qty:
In Stock & Ready to Ship
$8.00 $96.35
Cardone Disc Brake Caliper  Front Left
  • Cardone/OEF3 Reman
  • Friction Ready - with Installation Hardware w/o Bracket
  • Unloaded w/o Bracket
  • Front - Left
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1984 - Nissan Sentra Front Left L 4 Cyl 1.6L 97 1597
Mando
Disc Brake Caliper Mando

P311-3F73648    16A5278  New

Qty:
In Stock & Ready to Ship
$84.53
Mando Disc Brake Caliper
  • New OE Disc Brake Caliper, Direct Replacement
  • Disc Brake Caliper failures are not as common compared to brake pads replacements, but undoubtedly normal/heavy usage over time will cause wear and eventually failure. Failures may include brake fluid leakages or simply lockage of your brake pads – both are major safety concerns. Mando brand new OE brake calipers are same brake calipers as the original ones found on your vehicle. Mando calipers come factory coated as specified by Hyundai and Kia, which is especially important in the snowy-wet regions of the world. Don’t settle for just any value line brake caliper, replace proudly with Mando - We Are OE!

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mando
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 14 Products for Disc Brake Caliper.