EGR
Idle-5500rpm
For 4 bbl Carbs
Use Chrysler Intake Gasket PN[4494462AB]~ Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 318-340-360 Chrysler Small Block LA engines
Performer 318/360 Intake Manifold
Product Attributes:
Basic Operating RPM Range:Idle-5500
Center Maximum Height:4.630
CNC Ported:No
EGR Port:Yes - For 1972-86
Flange Type:4150
Front Maximum Height:4.130
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:5.130
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Single Or Dual Plane Type:Dual
Vehicle Model:Chrysler
Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Version
1983 - Chrysler Cordoba
N/R
1983 Chrysler Cordoba Engine Intake Manifold Edelbrock - Performer Series Intake Manifold
P311-57B30F32176New
Qty:
In Stock & Ready to Ship
$451.34
Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines
Cast Finish
4 bbl Carb
Non-EGR
Idle-5500 rpm
Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer 318/360 Intake Manifold for 1966-87 Chrysler "LA" Small-Block Engines is Designed for Street 318-340-360 c.i.d. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR
Performer Series Intake Manifold
Product Attributes:
Basic Operating RPM Range:Idle-5500
Center Maximum Height:4.630
CNC Ported:No
EGR Port:No
Flange Type:4150
Front Maximum Height:4.130
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:5.130
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Single Or Dual Plane Type:Dual
Vehicle Model:Chrysler
Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Version
1983 - Chrysler Cordoba
N/R
1983 Chrysler Cordoba Engine Intake Manifold Edelbrock - Performer Series Intake Manifold
P311-42F22AF21763New
Qty:
In Stock & Ready to Ship
$580.85
Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish
Black Finish
4 bbl Carb
Non-EGR
Idle-5500 rpm
Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 273-360 Chrysler Small Block LA engines
Performer Series Intake Manifold
Product Attributes:
Basic Operating RPM Range:Idle-5500
Center Maximum Height:4.630
CNC Ported:No
EGR Port:No
Flange Type:4150
Front Maximum Height:4.130
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:5.130
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Single Or Dual Plane Type:Dual
Vehicle Model:Chrysler
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Version
1983 - Chrysler Cordoba
N/R
Engine Intake Manifold Racing Head Service (RHS)
P311-0B981AA11903-KITNew
Qty:
In Stock & Ready to Ship
$822.06
Dominator Flange EFI Single Plane Intake with Fuel Rails for Chevrolet Big Block
Offering excellent performance for drag race and marine Chevrolet Big Blocks, this EFI manifoldrail kit delivers excellent flow, throttle response and torque. The RHS 24 Degree Manifold provides a distinct advantage over the competition.
Product Attributes:
Basic Operating RPM Range:3000-8000
Bolt Centerline to Port Floor:1.15
Bolt Hole Centerline to Port Roof:1.34
Carb Angle:0
Carb Height:7.46
Carburetor Mounting Pattern:4500/dominator
Center Maximum Height:7.46
CNC Ported:No
EGR?:No
Finish:Natural
Front Maximum Height:2.81
Fuel Rail End Type:-8 An Female O-ring
Gasket Or Seal Included:No
Grade Type:Performance
Includes Fuel Rails?:Yes
Injectors Included?:No
Intake Port Height:2.49
Intake Port Width:1.71
Long Fuel Rail Stand Injector Compatibility:Ev1 Style
Long Fuel Rail Stand Length:2.48
Material:Aluminum
Mounting Hole Diameter:7/16 Slotted
Mounting Hole Quantity:12
Multiport EFI Ready?:Yes
Nitrous Bosses?:No
Plenum Volume (including Runners):268
Rear Maximum Height:2.36
Short Fuel Rail Stand Injector Compatibility:Ls3 Style
Short Fuel Rail Stand Length:1.4
Single Or Dual Plane Type:Single
Throttle Body Included?:No
These manifolds are designed for maximum airflow and power with a 4500 Dominator-style carburetor flange. Engineered to fit most 24-degree style race cylinder heads, RHS took additional efforts to ensure excellent port matching when paired with RHS Big Block Chevrolet cylinder heads. These manifolds are available in both carb and EFI versions and offer excellent performance for drag racing and marine applications.
Featuring a single-plane design, they utilize individual runner dividers for excellent throttle response and exceptional torque. Available for both short and tall deck blocks, all versions utilize a standard BBC distributor – there is no need for a slip collar distributor or special distributor for tall deck engines. They feature auxiliary water ports, an integral water crossover and dual distributor hold-down pads. Ports for water lines are also provided at all four corners. RHS also teamed up with sister brand FAST to create a revolutionary EFI version of the manifold that features port angle optimized injector bung mounting and machining, which angles the injectors to point directly at the valve. In addition, the EFI manifolds feature integral sensor mounting points to improving function, fitment and packaging.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Racing Head Service (RHS)
Additional Fitment Information:
Vehicle
Engine Intake Manifold Weiand
P311-2466FAB7151WNDNew
Qty:
In Stock & Ready to Ship
$718.45
6-71 / 8-71 SuperCharger Intake Manifold
6-71 / 8-71 SuperCharger Intake Manifold; Lower; w/Rectangular Port Heads; Includes Rear Mounted Pop Off Plate; w/Boost Gauge Port; Satin Finish;
Product Attributes:
Blower Size:
6-71
8-71
Cylinder Head Type:Standard
Emission:N/a
Engine Make/Size:Chevy Big Block V8
RPM Range:N/a
Usage:Street/strip
WARNING CA Proposition 65:No
Features:
Easier Installation
Satin Finish
6-71/8-71 Chevy B/B 396-502
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Weiand
Additional Fitment Information:
Vehicle
Engine Intake Manifold Edelbrock
P311-17F66092504New
Qty:
In Stock & Ready to Ship
$626.60
Performer RPM 4V/Q-JET Marine Intake Manifold for 55-86 Small-Block Chevy
Performer RPM Q-JET Marine Intake Manifold For 1986 & Earlier Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors
Product Attributes:
Basic Operating RPM Range:1500-6500
Center Maximum Height:4.720
CNC Ported:No
Cylinder Head Type:Standard
EGR Port:No
Emission:N/a
Engine Make/Size:Chevy Small Block (262-400)
Flange Type:4150
Front Maximum Height:4.200
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:5.250
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
RPM Range:Idle -5500
Single Or Dual Plane Type:Dual
Usage:Oem
Vehicle Model:Chevrolet
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
Cast Aluminum
Broad Powerband
Edelbrock part #2504 Performer RPM Q-Jet marine intake manifold is designed for 1955-86 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. This Performer RPM Q-Jet intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Intake Manifold Edelbrock
P311-26216422506New
Qty:
In Stock & Ready to Ship
$631.93
Performer RPM 4V/Q-JET Marine Intake Manifold for 87-95 Small-Block Chevy
Performer RPM Q-JET Marine Intake Manifold For 1987-95 Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors
Product Attributes:
Basic Operating RPM Range:1500-6500
Center Maximum Height:4.720
CNC Ported:No
Cylinder Head Type:Standard
EGR Port:No
Emission:N/a
Engine Make/Size:Chevy Small Block (262-400)
Flange Type:4150
Front Maximum Height:4.200
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:5.250
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
RPM Range:Idle -5500
Single Or Dual Plane Type:Dual
Usage:Oem
Vehicle Model:Chevrolet
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
Cast Aluminum
Broad Powerband
Edelbrock part #2506 Performer RPM Q-Jet marine intake manifold is designed for 1987-95 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine. Delivers maximum power and a broad torque curve for high-performance marine. Carb pad will accept square-bore carbs without adapters. The Performer RPM Q-Jet marine intake manifold features brass lined front water crossover and brass flange inserts to cover the rear water openings.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Intake Manifold Edelbrock
P311-3E75DDF28001New
Qty:
In Stock & Ready to Ship
$885.73
Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevy
Edelbrock Big Victor 2 Spread-Port Intake Manifold for Big-Block Chevrolet
Product Attributes:
Basic Operating RPM Range:3500-8500
Center Maximum Height:9.210
CNC Ported:No
Cylinder Head Type:Big Chief
EGR Port:No
Emission:Without Egr
Engine Make/Size:Chevy Big Block (396-502)
Flange Type:4500
Front Maximum Height:9.210
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:9.210
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
RPM Range:3500-8500
Single Or Dual Plane Type:Single
Usage:Racing
Vehicle Model:Chevrolet
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
For 3500 to 8500 RPM High-Performance Engines
For Large CID or High RPM Drag Racing Big Blocks
Use with Dart Big Chief Cylinder Heads
Require Port Matching and Can Use Oval Ports
Better Top End Horsepower and Consistency
Crisp Throttle Response off the Stop
Use for 9.8 in. Deck Height Engines
Use Appropriate 4500-Series Carburetor
Edelbrock part #28001 Big Victor 2 Spread-Port intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Intake Manifold Edelbrock
P311-5BB05E228002New
Qty:
In Stock & Ready to Ship
$897.74
Big Victor 2 Spread-Port, Tall Deck Intake Manifold for Big-Block Chevy
Edelbrock Big Victor 2 Spread-Port Tall Deck Intake Manifold for Big-Block Chevrolet
Product Attributes:
Basic Operating RPM Range:3500-8500
Center Maximum Height:9.530
CNC Ported:No
Cylinder Head Type:Big Chief
EGR Port:No
Emission:Without Egr
Engine Make/Size:Chevy Big Block (396-502)
Flange Type:4500
Front Maximum Height:9.530
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:9.530
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
RPM Range:3500-8500
Single Or Dual Plane Type:Single
Usage:Racing
Vehicle Model:Chevrolet
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
For 3500 to 8500 RPM High-Performance Engines
For Large CID or High RPM Drag Racing Big Blocks
Use with Dart Big Chief Cylinder Heads
Require Port Matching and Can Use Oval Ports
Better Top End Horsepower and Consistency
Crisp Throttle Response off the Stop
Use for 10.2 in. Deck Height Engines
Use Appropriate 4500-Series Carburetor
Edelbrock part #28002 Big Victor 2 Spread-Port Tall-Deck intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks with Edelbrock Big Victor, Dart Big Chief or Brodix Big Duke cylinder heads, this manifold has an average runner area of approximately 4.75 sq. in. The port exits have been reduced to accommodate the wide variety of intake port sizes and require port matching. The runners have a minimum corner radius of .500" from the plenum to the exit allowing the popular oval port shape to be used. The outside runners are shorter and straighter than competitor's manifolds and the plenum is longer front to back. These features, combined with approximately 5% taper in runner cross-sectional area, give better top end horsepower while maintaining consistency and throttle response off the stop. All applications are equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Intake Manifold Edelbrock
P311-165704128097New
Qty:
In Stock & Ready to Ship
$661.77
Super Victor Intake Manifold for Gen III LS1/LS2
Edelbrock Super Victor LS1/LS2 Carbureted Intake Manifold for Chevrolet LS Gen III
Product Attributes:
Basic Operating RPM Range:3500-8000
Center Maximum Height:6.070
CNC Ported:No
Cylinder Head Type:Standard
EGR Port:No
Emission:Without Egr
Engine Make/Size:Chevy Small Block Ls1
Flange Type:4150
Front Maximum Height:6.070
Gasket Or Seal Included:No
Grade Type:Performance
Rear Maximum Height:6.070
RGL:Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
RPM Range:3500-8000
Single Or Dual Plane Type:Single
Usage:Racing
Vehicle Model:Chevrolet
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
Offers Greater Air Flow Potential
Bigger Power Gains
Accepted By NASCAR For Grand National Series
For Use With Carburetor
Edelbrock part #28097 Super Victor LS1 intake manifold offers greater air flow potential for even bigger power gains, this manifold has been accepted by NASCAR for use in the Grand National West/Grand National East series. The carb mount pad is 1.12" taller than the Victor Jr. LS1, and the port exits have been increased to 1.08" x 2.74". Edelbrock offers the optional LS1 Timing Control Module #91238 to drive the stock LS1 Coil-on-Plug ignition system. LS2 applications require MSD's #6012 LS2 ignition controller (available through MSD Performance).
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
139 Products for Engine Intake Manifold.