Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • Holley
    Holley
  • Mr Gasket
    Mr Gasket
  • Quick Fuel Technology
    Quick Fuel Technology

Showing Products For 1983 Cadillac Seville Carburetor Throttle Stud

Below are all the different brands and applications for 1983 Cadillac Seville Carburetor Throttle Stud

Showing 1 - 10 of 14 Products for Carburetor Throttle Stud.

Refine Your Search

Mr Gasket
Carburetor Throttle Stud Mr Gasket

P311-1A63A74    59  New

Qty:
In Stock & Ready to Ship
$27.90
Mr Gasket Carburetor Throttle Stud
  • Carburetor Studs
  • Carburetor Studs; Standard 1 3/8 in.; Package Of 4 Studs; Nuts And Washers;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Facilitates Removal
    • Facilitates Installation
  • Mr. Gasket Short Carburetor Studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1-3/8 inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete the job.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Carburetor Throttle Stud Mr Gasket

P311-3A1F029    61  New

Qty:
In Stock & Ready to Ship
$37.51
Mr Gasket Carburetor Throttle Stud
  • Carburetor Studs
  • Carburetor Studs; Long; 2 in.; Package Of 4 Studs; Nuts And Washers;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Zinc Plated
    • 2 in. Long
  • Mr. Gasket Carburetor Studs put an end to stripped-out threads in cast aluminum manifolds. They hold the gasket in place and perfectly align the carburetor in position. Zinc-plated and 2 inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete the job.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Carburetor Throttle Stud Mr Gasket

P311-5E50F46    60  New

Qty:
In Stock & Ready to Ship
$27.20
Mr Gasket Carburetor Throttle Stud
  • Carburetor Studs
  • Carburetor Studs; Zinc Coated; 1.5 in. Length; Coarse Thread On One End And Fine Thread On The Other;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Zinc Plated Steel
    • Fits All 5/16 in. x 1-1/2 in. Applications
    • 5/16 in. 16 And 5/16-24 Threads
    • Comes 4 ea. Per Set
  • Mr. Gasket Carburetor Studs put an end to stripped-out threads in cast aluminum manifolds. They hold the gasket in place and perfectly align the carburetor in position. Zinc-plated and 1-1/2 inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete the job.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Carburetor Throttle Stud Mr Gasket

P311-34A8DD8    6346G  New

Qty:
In Stock & Ready to Ship
$40.99
Mr Gasket Carburetor Throttle Stud
  • Carburetor Studs
  • Carburetor Studs; 6-Point Hex Head; 2 in. Length; 5.88 in. H x 4 in. W x 0.75 in. D; 4 pc.;
  • Product Attributes:
    • Length: 2.000 In.
    • WARNING CA Proposition 65: No
  • Features:
    • Features Bullet Nose For Ease Of Installation
    • Made Of Steel
    • Has A Black Oxide Coating
    • Coating Resists Corrosion
    • Extra Long 2 in.
  • These are high quality bolts that are easy to use. They have a bullet nose which is rounded for ease of installation, and that helps those carburetors slid down on the studs easier.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Mr Gasket
Carburetor Throttle Stud Mr Gasket

P311-07A948B    62  New

Qty:
In Stock & Ready to Ship
$31.38
Mr Gasket Carburetor Throttle Stud
  • Carburetor Studs
  • Carburetor Studs; Extra Long; 2.5 in.; Coarse Thread On One End And Fine Thread On The Other; 4 Studs w/Nuts And Washers;
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Fits Up To 1-3/4 in. Spacers
    • Made Of Zinc Coated Steel
    • 5/16-24 And 5/16x16 Threads
    • 4 ea. Per Set
  • This is a high quality long stud that will be needed if you add a carburetor spacer under your carb. This is usually something that you will forget up until you set that carb on and the bolts are too short. So pick up a set today and have them ready. These zinc-plated studs help prevent stripped out threads in your aluminum intake manifold, hold the gasket in place and guide the carburetor on. Includes 4 studs, nuts & washers. Extra long 2-1/2 inch length.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Mr Gasket
Additional Fitment Information:
Vehicle
Edelbrock
Carburetor Throttle Stud Edelbrock

P311-5D8BDCD    8007  New

Qty:
In Stock & Ready to Ship
$32.51
Edelbrock Carburetor Throttle Stud
  • Throttle and Auto Transmission Shoulder Stud Kit
  • THRO A/T KIT E/CHRYS
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • Throttle and Automatic Transmission
    • Gloss Black Painted Finish
  • Edelbrock #8007 Throttle & Automatic Transmission Shoulder Stud

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Edelbrock
Carburetor Throttle Stud Edelbrock

P311-0DE1900    8016  New

Qty:
In Stock & Ready to Ship
$35.60
Edelbrock Carburetor Throttle Stud
  • Carburetor Ball Stud
  • Ball End Stud for Holley Carburetors
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Features:
    • For Use With Holley Carburetors
    • Also Fits Carter AFB Carbs
    • Made In The U.S.A.
  • Edelbrock #8016 1/4" Ball End throttle stud ? ??

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Holley
Carburetor Throttle Stud Holley

P311-4810E53    20-67  New

Qty:
In Stock & Ready to Ship
$45.37
Holley Carburetor Throttle Stud
  • Carburetor Throttle Stud
  • Carburetor Throttle Stud; Chrysler Throttle And Cruise Control;
  • Product Attributes:
    • Package Quantity: 1
    • WARNING CA Proposition 65: No
  • Features:
    • Steel Material
    • Zinc Finish
  • Throttle and Cruise Control Stud for Chrysler Applications

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Carburetor Throttle Stud Holley

P311-21E53C0    20-64  New

Qty:
In Stock & Ready to Ship
$31.71
Holley Carburetor Throttle Stud
  • Carburetor Throttle Stud
  • Carburetor Throttle Stud; Throttle And Cruise Control;
  • Product Attributes:
    • Package Quantity: 1
    • WARNING CA Proposition 65: No
  • Features:
    • Steel Material
    • Zinc Finish
  • Universal Throttle and Cruise Control Stud

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle
Holley
Carburetor Throttle Stud Holley

P311-2E28A81    20-38  New

Qty:
In Stock & Ready to Ship
$35.81
Holley Carburetor Throttle Stud
  • Carburetor Throttle Stud
  • Carburetor Throttle Stud; 0.25 in. Dia.;
  • Product Attributes:
    • Package Quantity: 1
    • WARNING CA Proposition 65: No
  • Features:
    • Effective Mounting Point
    • For Carburetor Hookup
  • Throttle Cable Stud 1/4 in. Diameter

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Holley
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 14 Products for Carburetor Throttle Stud.