Finish Selecting Your Vehicle

Choose your Engine for your 1982 Buick Regal

  • 6 Cyl 3.8L
  • 6 Cyl 4.1L
  • 8 Cyl 4.4L
  • 8 Cyl 5.0L
  • 8 Cyl 5.7L

Shop By Brand

The Following brands are available based on your search.

  • BBB Industries
    BBB Industries
  • Borgeson
    Borgeson
  • Cardone
    Cardone
  • Mapco
    Mapco
  • Tuff Stuff Performance Accessories
    Tuff Stuff Performance Accessories

Showing Products For 1982 Buick Regal Power Steering Pump

Below are all the different brands and applications for 1982 Buick Regal Power Steering Pump

Showing 1 - 10 of 32 Products for Power Steering Pump.

Refine Your Search

Cardone
1982 Buick Regal Power Steering Pump 8 Cyl 5.0L Cardone - Power Steering Pump

P311-10F4EA9    20-661  Remanufactured

15076608 , 15076609 , 15076611 , 15077366 , 15077397 , 15134700 , 15267673 , 15267676 , 15267677 , 15270799 , 15754216 , 15766354 , 15833567 , 15909830 , 19153678 , 26000518 , 26003871 , 26004122 , 26008897 , 26015764 , 26015767 , 26015770 , 26016582 , 26016588 , 26017260 , 26020019 , 26020020 , 26020023 , 26020778 , 26024242 , 26025302 , 26027974 , 26031458 , 26031756 , 26037445 , 26041315 , 26042589 , 26068923 , 33001907 , 3815968 , 4333055 , 4470330 , 4470555 , 52039489AC , 52039489AD , 53000092 , 7389817 , 7838617 , 7839787 , 7839788 , 7839792 , 7839803 , 7839812 , 7839817 , 7839997 , 7840244 , 7841536 , 7843087 , 88963509 , 88963600 , 88963602 , 88963605 , T0674708

Qty:
In Stock & Ready to Ship
$22.50 $55.76
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1982 - Buick Regal V 8 Cyl 5.0L 305 -
Cardone
1982 Buick Regal Power Steering Pump 6 Cyl 4.1L Cardone - Power Steering Pump

P311-2204E48    20-862  Remanufactured

055145157A , 175422155A , 26000268 , 26000269 , 26010257 , 26010327 , 26010328 , 26019685 , 26020781 , 26026916 , 26032951 , 3251017 , 3815971 , 4333134 , 4333292 , 4470338 , 4470378 , 4470379 , 52007101 , 52007104 , 52039489 , 53000719 , 53003904 , 53007140 , 7838686 , 7838838 , 7839087 , 7839345 , 7839790 , 7839794 , 7839795 , 7839796 , 7839811 , 7839820 , 7840240 , 7840304 , 7841780 , 7842490 , 7844462

Qty:
In Stock & Ready to Ship
$11.70 $53.88
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: No
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal GAS V 6 Cyl 4.1L 252 -
BBB Industries
1982 Buick Regal Power Steering Pump 8 Cyl 4.4L BBB Industries - Reman Power Steering Pump

P311-337F4FC    731-0127  Remanufactured

19318691

Qty:
In Stock & Ready to Ship
$9.00 $59.32
BBB Industries Power Steering Pump
  • w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Reservoir
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Fuel Type Engine VIN Block Engine CID CC
1982 - Buick Regal GAS J V 8 Cyl 4.4L 267 -
BBB Industries
1982 Buick Regal Power Steering Pump 8 Cyl 5.7L BBB Industries - New Power Steering Pump

P311-4E92493    N731-0118  New

15928343 , 19318682 , 20832683

Qty:
In Stock & Ready to Ship
$145.18
BBB Industries Power Steering Pump
  • w/o Reservoir
  • New Power Steering Pump
Brand: BBB Industries
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal DIESEL V 8 Cyl 5.7L 350 -
BBB Industries
1982 Buick Regal Power Steering Pump 8 Cyl 5.7L BBB Industries - Reman Power Steering Pump

P311-2810E43    731-0118  Remanufactured

15928343 , 19318682 , 20832683

Qty:
In Stock & Ready to Ship
$37.00 $56.76
BBB Industries Power Steering Pump
  • w/o Reservoir
  • Reman Power Steering Pump
  • Product Attributes:
    • Filter Included: No
    • Inlet Attachment Type: Reservoir
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: No
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal DIESEL V 8 Cyl 5.7L 350 -
BBB Industries
1982 Buick Regal Power Steering Pump 8 Cyl 4.4L BBB Industries - Reman Power Steering Pump

P311-3C0831A    731-2164  Remanufactured

19319813 , 7841780

Qty:
In Stock & Ready to Ship
$27.00 $60.79
BBB Industries Power Steering Pump
  • with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • Reman Power Steering Pump
  • Product Attributes:
    • Inlet Attachment Type: Reservoir
    • Inlet Diameter: 0.379
    • Inlet Size: 0.379
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: Yes
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Fuel Type Engine VIN Block Engine CID CC
1982 - Buick Regal GAS J V 8 Cyl 4.4L 267 -
BBB Industries
1982 Buick Regal Power Steering Pump 8 Cyl 5.0L BBB Industries - Reman Power Steering Pump

P311-020A9B9    731-2131  Remanufactured

19319780

Qty:
In Stock & Ready to Ship
$86.00 $59.93
BBB Industries Power Steering Pump
  • with Reservoir; ** Reservoir Units Are Recommended Replacement **
  • Reman Power Steering Pump
  • Product Attributes:
    • Inlet Attachment Type: Reservoir
    • Inlet Diameter: 0.379
    • Inlet Size: 0.379
    • Installation Kit Included: Yes
    • Outlet Thread Size: M16x1.50
    • Pulley Attachment Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Cap Included: No
    • Reservoir Included: Yes
    • Sensor Included: No
Brand: BBB Industries
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal GAS V 8 Cyl 5.0L 305 -
Cardone
1982 Buick Regal Power Steering Pump 8 Cyl 5.0L Cardone - Power Steering Pump

P311-010C19B    96-661  New

15076608 , 15076609 , 15076611 , 15077366 , 15077397 , 15134700 , 15267673 , 15267676 , 15267677 , 15754216 , 15766354 , 15833567 , 19153678 , 26000518 , 26003871 , 26004122 , 26008897 , 26015764 , 26015767 , 26015770 , 26016582 , 26016588 , 26017260 , 26020019 , 26020020 , 26020023 , 26020778 , 26024242 , 26025302 , 26027974 , 26031458 , 26031756 , 26037445 , 26041315 , 26042589 , 26068923 , 33001907 , 3815968 , 4333055 , 4470330 , 4470555 , 52039489AD , 53000092 , 7838617 , 7839787 , 7839788 , 7839792 , 7839803 , 7839812 , 7839817 , 7839997 , 7840244 , 7841536 , 7843087 , 88963509 , 88963600 , 88963602 , 88963605 , T0674708

Qty:
In Stock & Ready to Ship
$156.35
Cardone Power Steering Pump
  • Reservoir Not Included In-Line Filter available For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system with Seal Kit
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • Manufactured With Premium Grade, High-temperature Seals For Added Durability Under All Driving Conditions.
      • Meets Or Exceeds O.e. Performance.
      • Precise Bushing Alignment Prevents Premature Shaft And Seal Wear, Significantly Reducing Noise And Vibration.
      • Rigorous Computer Load Testing Ensures Optimal Performance And Durability By Incorporating Real-world Parameters During The Test Cycle.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: New
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: No
  • Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Brand: Cardone
Additional Fitment Information:
Vehicle Block Engine CID CC
1982 - Buick Regal V 8 Cyl 5.0L 305 -
Cardone
1982 Buick Regal Power Steering Pump 6 Cyl 3.8L Cardone - Power Steering Pump

P311-1D760D5    20-7911  Remanufactured

53000719 , 53003904 , 7839087 , 7839345 , 7839795 , 7839796 , 7841780 , 8953000719

Qty:
In Stock & Ready to Ship
$8.10 $56.81
Cardone Power Steering Pump
  • Reservoir Included In-Line Filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The System. Remove Reservoir Lid And Inspect Fluid Level And Condition. If Fluid Has Foam Or Air Bubbles Present, You Must Bleed The System Again. Some Systems Are Very Difficult To Bleed Manually And May Require
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Most Likely Cause Is Contamination. Remove The Pressure Hose And Pressure Fitting On The Power Steering Pump. Remove The Flow Control Valve And Spring. Clean The Valve And Check The Valve Bore For Damage. Reinstall The Spring, Valve, Fitting And Hose. Flu
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The End Of The Original Pump's Input Shaft Enlarged Causing The Pulley Hole To Increase During Removal. The Pulley Must Be Replaced.
      • The Problem Is Most Likely In The Steering Unit?the Pump Does Not Know Left From Right. Check For Binding Steering Components And Repair As Necessary.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: Yes
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal GAS V 6 Cyl 3.8L 231 3800
Cardone
1982 Buick Regal Power Steering Pump 8 Cyl 5.0L Cardone - Power Steering Pump

P311-3AB8F63    20-7803  Remanufactured

7839787 , 7839788

Qty:
In Stock & Ready to Ship
$22.50 $53.88
Cardone Power Steering Pump
  • Reservoir Included In-Line Filter available without Aftermarket Filtration Improvement For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system
  • Power Steering Pump
  • Product Attributes:
    • E-Waste: No
    • FAQs:
      • A Whining Pump Is Usually Caused By Air In The Power Steering System. Inspect The Reservoir For Proper Fluid Level. If Fluid Has Foam Or Air Bubbles Present, Air Has Entered The System Or Has Not Been Properly Bled (ensure All Hoses/clamps Are Tight). So
      • I Bought A Replacement Power Steering Pump And My Original Pulley Has A Loose Fit On The Replacement Pump Shaft. What Should I Do?
      • I Only Have Assist When Increasing Engine Rpm After Installing The Replacement Pump. What's Causing This?
      • Should I Ever Change My Fluid, Even Though Nothing Is Wrong?
      • The Problem Is Not In The Pump, It Is In The Steering Gear. The Pump Would Cause A Steering Problem In Both Directions.
      • The Pulley May Have Cracked Upon Removal. If The Shaft Was Mushroomed Before Removing The Pulley, It Has Now Enlarged The Bore In The Pulley. The Pulley Must Be Replaced.
      • There May Be Debris In The Flow Control Valve Bore Not Allowing The Flow Control Valve To Move As It Should. (valve And Bore Are Located Behind The High Pressure Fitting On The Pump). The System Must Be Checked For Contamination And Flushed.
      • Why Do I Still Have Hard Steering In One Direction After I Replaced The Pump?
      • Why Is The Pump Making A Whining Noise All Of The Time?
      • Yes. Some O.e. Manufacturers Recommend That Power Steering Fluid Be Changed At 50,000 Miles And Continue At That Interval. Just Like Engine Oil, Power Steering Fluid Will Eventually Break Down And Carry Suspended Contaminants From Component Wear And Break
    • Features and Benefits:
      • All Critical Components (cam Packs, Spool Valves, Etc.) Are Triple-tested To Ensure Product Reliability.
      • All Units Are Built With 100% New O-rings And Premium-grade Hnbr Seals To Prevent Leaks. Hnbr Does Not Break Down At High Temperatures Like Conventional Seal Material.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Final Pump Assembly Is Computer-tested To Measure Pressure, Bypass, Fluid Flow, Valve Operation, Steering Effort And Noise To Ensure Reliable Performance.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Shafts Are Surfaced To Precise Specifications To Eliminate Premature Seal Wear And Extend Pump Life.
      • Units Are Supplied With 100% Tested And Calibrated Pressure Relief Valves.
    • Hose Port Type: O-ring
    • Housing Material: Cast Iron
    • Mounting Hardware Included: No
    • Package Contents: Hydraulic Pump; Instruction Sheet; Sealing Kit
    • Power Steering Outlet ID Size: 0
    • Power Steering Outlet Thread Size: 16x1.5
    • Power Steering Pump Inlet Attachement Type: Hose Barb
    • Power Steering Pump Outlet Attachment Type: Threaded
    • Power Steering Reservoir Cap Included: No
    • Product Condition: Remanufactured
    • Pulley Attachement Type: Press-on
    • Pulley Included: No
    • Remote Reservoir: No
    • Reservoir Included: Yes
  • CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Brand: Cardone
Additional Fitment Information:
Vehicle Fuel Type Block Engine CID CC
1982 - Buick Regal GAS V 8 Cyl 5.0L 305 -

Showing 1 - 10 of 32 Products for Power Steering Pump.