Finish Selecting Your Vehicle

Choose your Engine for your 1981 Chevrolet C10

  • 6 Cyl 4.1L
  • 6 Cyl 4.8L
  • 8 Cyl 5.0L
  • 8 Cyl 5.7L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Powerstop
    Powerstop
  • Raybestos
    Raybestos

Showing Products For 1981 Chevrolet C10 Disc Brake Caliper

Below are all the different brands and applications for 1981 Chevrolet C10 Disc Brake Caliper

Showing 1 - 10 of 55 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-39D9EB7    18-4020  Remanufactured

18003761 , 18005265 , 18007946 , 18012309 , 18015428 , 18020904

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • with Brake Code JB1 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10 X 1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Right
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-39D9EB7    18-4020  Remanufactured

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • with Brake Code JB3 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10 X 1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Right
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-2BA0B51    18-4021  Remanufactured

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • with Brake Code JB3 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10 X 1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Left
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-2BA0B51    18-4021  Remanufactured

18003760 , 18005264 , 18012308 , 18015427 , 18020903

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • with Brake Code JB1 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10 X 1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Left
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-5D2A9ED    18-4126  Remanufactured

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • with Brake Code JD3 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Right
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-5D2A9ED    18-4126  Remanufactured

18005246 , 18007948 , 18015384

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • with Brake Code JD5 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Right
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Right Cardone - Unloaded Caliper

P311-5D2A9ED    18-4126  Remanufactured

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • with Brake Code JB5 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Right
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-2237D4D    18-4127  Remanufactured

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • with Brake Code JD5 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Left
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-2237D4D    18-4127  Remanufactured

18005245 , 18007947 , 18015383

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • with Brake Code JD3 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Left
Cardone
1981 Chevrolet C10 Disc Brake Caliper - Front Left Cardone - Unloaded Caliper

P311-2237D4D    18-4127  Remanufactured

Qty:
In Stock & Ready to Ship
$17.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • with Brake Code JB5 with Metal Piston GM Brake Codes are on the "Service Parts Identification" Sticker Installation Hardware Included
  • Unloaded Caliper
  • Product Attributes:
    • Bleeder Port Size: M10x1.5
    • Brake Caliper Finish: Oil Emulsion
    • Caliper Color: Gray
    • E-Waste: No
    • FAQs:
      • A Silicone Grease Is Used On Floating Caliper Mounting Pins.
      • A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
      • As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
      • Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
      • Brakes Squeal All Of The Time. What's Causing The Squeal?
      • Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
      • Car Pulls To One Side During Braking. Why?
      • Could Calipers Be The Cause Of A Low Brake Pedal?
      • Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
      • Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
      • New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
      • Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
      • What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
      • What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • Features and Benefits:
      • A Plastic Cap Plug Protects Every Brake Port Thread To Ensure Trouble-free Installation.
      • As A Remanufactured Original Equipment Part, This Unit Guarantees A Perfect Vehicle Fit.
      • Calipers Are Treated With A Special Formulated Rust Inhibitor And Kept In The Original Equipment Finish.
      • Mounting Bracket Is Included Where Applicable For A Hassle-free Installation.
      • New Banjo Bolts Are Included Where Applicable To Ensure A Perfect Fit And Quick Installation.
      • New Bleeder Screws Provide Trouble-free Bleeding And A Positive Seal.
      • New Stainless Steel Hardware Clips And New Mounting Pins Are Included Where Applicable.
      • New Washers Are Included Where Applicable For A Proper Seal.
      • Our Remanufacturing Process Is Earth-friendly, As It Reduces The Energy And Raw Material Needed To Make A New Part By 80%.
      • Pistons Are Durable, Resistant To Cracking Or Pitting And Handle Great Loads.
      • Rubber Seals Are Replaced With New High Temperature Epdm Rubber For Extended Life And Optimum Performance.
    • Inlet Port Size: M10x1.5
    • Installation Hardware Included: Yes
    • Mounting Bolts Included: Yes
    • Package Contents: Caliper; Hardware Kit
    • Pads Included: No
    • Piston Material: Steel
    • Piston Size (OD) (in): 2.935
    • Piston Size (OD) (mm): 74.549
    • Product Condition: Remanufactured
  • Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1981 - Chevrolet C10 Front Left

Showing 1 - 10 of 55 Products for Disc Brake Caliper.