1980 Mercedes-Benz 300CD Engine Cylinder Head Gasket Victor Reinz
P311-4EF040AW0133-1621481New
Qty:
In Stock & Ready to Ship
$49.99
This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
VR-2000
Brand: Victor Reinz
Additional Fitment Information:
Vehicle
1980 - Mercedes-Benz 300CD
Engine Cylinder Head Gasket Cometic Gasket
P311-07A1D42C5635-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.530in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv/v/iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-2BD52D3C5764-051New
Qty:
In Stock & Ready to Ship
$125.00
GM L18 Vortec 8100 Gen-VII Big Block V8 Cylinder Head Gasket
GM L18 Vortec 8100 Gen-VII Big Block V8 .051in. MLS Cylinder Head Gasket; 4.280in. Bore; LHS
Product Attributes:
Engine Make/Size:Gm/mercury Marine 8.1l
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.051". Left Side. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-1EC80FEC5641-060New
Qty:
In Stock & Ready to Ship
$135.70
GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .060in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.060". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-046971AC5641-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV Cylinder Head Gasket
GM/Marine Marine 1050 Gen-IV Big Block V8 .051in. MLS Cylinder Head Gasket; W/2 Slotted Lifter Valley Bolts; 4.600in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 2 Slotted Valley Bolts. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-246AE48C5637-051New
Qty:
In Stock & Ready to Ship
$114.71
GM/Mercury Marine Gen-IV/V/VI Cylinder Head Gasket
GM/Mercury Marine Big Block V8 Gen-IV/V/VI .051in. MLS Cylinder Head Gasket; W/4 Bolts in Lifter Valley; 4.600in. Bore
Product Attributes:
Engine Make/Size:Gm/mercury Marine Gen Iv/v/iv Big Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed thickness is 0.051". 4 Bolts in Valley. Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-30F793BC5077-052New
Qty:
In Stock & Ready to Ship
$145.42
GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .052in. MLX Cylinder Head Gasket; 4.200in. Bore; RHS
Product Attributes:
Engine Make/Size:Gm Lsx
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Cylinder Head Gasket
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-5F33216C5076-040New
Qty:
In Stock & Ready to Ship
$145.42
GM LSX Gen-4 Small Block V8 Cylinder Head Gasket
GM LSX Gen-4 Small Block V8 .040in. MLX Cylinder Head Gasket; 4.100in. Bore; LHS
Product Attributes:
Engine Make/Size:Gm Lsx Small Block
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Cylinder Head Gasket
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
The Cometic MLS gasket is comprised of three to five layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and resist corrosion. The outer layers of the gasket are embossed and coated on both sides with a Viton rubber material designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 250°C or 482°F.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-4A245D9C5760-040New
Qty:
In Stock & Ready to Ship
$124.28
GM/Mercury Marine 525/625 502 Gen-VI Big Block V8 Cylinder Head Gasket
GM/Mercury Marine 525/625 502 Gen-VI Big Block V8 .040in. MLS Cylinder Head Gasket; 4.470in. Bore
Product Attributes:
Engine Make/Size:Gm Gen Ii/mark Vi 502ci V8 Mercury Marine 525/625
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.040". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Engine Cylinder Head Gasket Cometic Gasket
P311-1F4F7DBC5744-045New
Qty:
In Stock & Ready to Ship
$136.21
Ford 460 Pro Stock V8 Cylinder Head Gasket
Ford 460 Pro Stock V8 .045in. MLS Cylinder Head Gasket; 4.685in. Bore; A460 Block
Product Attributes:
Engine Make/Size:Ford 460 Prostock V8
WARNING CA Proposition 65:Yes
WARNING CA Proposition 65 Message:The State Of California Has Determined That Certain Chemicals Used In The Manufacture Of This Product Have Been Known To Cause Cancer And Birth Defects. For More Information; Visit Www.p65warnings.ca.gov
Features:
Provides Maximum Sealing Performance
Ideal For Aluminum Heads To Aluminum Blocks
Ideal For Aluminum Heads To Cast Iron Blocks
Comprised Of Multiple Layers Of Stainless Steel
Creates The Ability To Rebound And Resist Corrosion
Embossed Outer Layers Coated w/Viton
Comprised of multiple embossed layers of stainless steel with the outer layers utilizing a Viton rubber coating. Compressed operating thickness is 0.045". Cometic MLS (Multi-Layer Steel) Head Gaskets provide maximum sealing performance for todays high output engines and require no sealants. MLS gaskets are ideal for both aluminum heads to aluminum blocks and aluminum heads to cast iron blocks. They can withstand the shearing force created by the two materials. MLS gaskets have increased strength because they are comprised of multiple layers of stainless steel; which also creates the ability to rebound and resist corrosion. The outer layers are embossed and coated on both sides with Viton (a flour elastomer rubber based material that is heat resistant to 250 C/ 482 F). Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Cometic Gasket
Additional Fitment Information:
Vehicle
Showing
1 -
10
of
173 Products for Engine Cylinder Head Gasket.