1980 Chrysler New Yorker Engine Intake Manifold Engine - Edelbrock, FAST, Ford Performance, Holley, Racing Head Service (RHS), Weiand

1980 Chrysler New Yorker Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer Series Intake Manifold

Part # P311-42F22AF Manu # 21763 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $580.85

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish
Black Finish 4 bbl Carb Non-EGR Idle-5500 rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 273-360 Chrysler Small Block LA engines
Performer Series Intake Manifold
Product Attributes:
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.630
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 4.130
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.130
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.

Brand: Edelbrock

Vehicle	Engine Version	Block	Engine	CID	CC
1980 - Chrysler New Yorker	N/R	V	8 Cyl 5.9L	360	-

1980 Chrysler New Yorker Engine Intake Manifold Edelbrock - Performer 318/360 Intake Manifold

Part # P311-577157F Manu # 3776 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.62

Performer Intake Manifold Small-Block Chrysler
EGR Idle-5500rpm For 4 bbl Carbs Use Chrysler Intake Gasket PN[4494462AB]~ Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 318-340-360 Chrysler Small Block LA engines
Performer 318/360 Intake Manifold
Product Attributes:
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.630
- CNC Ported: No
- EGR Port: Yes - For 1972-86
- Flange Type: 4150
- Front Maximum Height: 4.130
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.130
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

Brand: Edelbrock

Vehicle	Engine VIN	Engine Version
1980 - Chrysler New Yorker	H	N/R

1980 Chrysler New Yorker Engine Intake Manifold Edelbrock - Performer Series Intake Manifold

Part # P311-57B30F3 Manu # 2176 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $451.34

Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines
Cast Finish 4 bbl Carb Non-EGR Idle-5500 rpm Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer 318/360 Intake Manifold for 1966-87 Chrysler "LA" Small-Block Engines is Designed for Street 318-340-360 c.i.d. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR
Performer Series Intake Manifold
Product Attributes:
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.630
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 4.130
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.130
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

Brand: Edelbrock

Vehicle	Engine VIN	Engine Version
1980 - Chrysler New Yorker	G	N/R

1980 Chrysler New Yorker Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer 318/360 Intake Manifold

Part # P311-577157F Manu # 3776 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $511.62

Performer Intake Manifold Small-Block Chrysler
EGR Idle-5500rpm For 4 bbl Carbs Use Chrysler Intake Gasket PN[4397642]~ Recommend Edelbrock Gasket PN[7276] for Manifold Gasket~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 318-340-360 Chrysler Small Block LA engines
Performer 318/360 Intake Manifold
Product Attributes:
- Basic Operating RPM Range: Idle-5500
- Center Maximum Height: 4.630
- CNC Ported: No
- EGR Port: Yes - For 1972-86
- Flange Type: 4150
- Front Maximum Height: 4.130
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.130
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #3776 Performer EGR intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's with EGR valve. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

Brand: Edelbrock

Vehicle	Engine Version	Block	Engine	CID	CC
1980 - Chrysler New Yorker	N/R	V	8 Cyl 5.9L	360	-

1980 Chrysler New Yorker Engine Intake Manifold 8 Cyl 5.9L Edelbrock - RPM Air-Gap Intake Manifold

Part # P311-58CF07C Manu # 75763 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $662.84

RPM Air-Gap Small Block Chrysler Black Intake Manifold
Black 4 bbl Carb Non-EGR 1500-6500rpm Accepts Early-Style Waterneck Only Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock RPM Air-Gap Intake Manifold for 318-340-360 Chrysler Small Block LA engines
RPM Air-Gap Intake Manifold
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 5.350
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 4.900
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.800
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that's been used on our Victor Series competition intakes for years. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Accepts 1975 and earlier waterneck only. No provision for exhaust heated chokes and no exhaust crossover. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Includes nitrous bosses. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.

Brand: Edelbrock

Vehicle	Engine Version	Block	Engine	CID	CC
1980 - Chrysler New Yorker	N/R	V	8 Cyl 5.9L	360	-

1980 Chrysler New Yorker Engine Intake Manifold 8 Cyl 5.9L Edelbrock - Performer RPM 340/360 Intake Manifold

Part # P311-5207C3B Manu # 7176 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $507.11

Performer RPM Small Block Chrysler Intake Manifold
Non-EGR 1500-6500rpm For 4 bbl Carbs Accepts Early Style Waterneck Only Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles
Edelbrock Performer Intake Manifold for 318-340-360 Chrysler Small Block LA engines
Performer RPM 340/360 Intake Manifold
Product Attributes:
- Basic Operating RPM Range: 1500-6500
- Center Maximum Height: 5.350
- CNC Ported: No
- EGR Port: No
- Flange Type: 4150
- Front Maximum Height: 4.900
- Gasket Or Seal Included: No
- Grade Type: Performance
- Rear Maximum Height: 5.800
- RGL: Warning: This Product Can Expose You To Lead, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
- Single Or Dual Plane Type: Dual
- Vehicle Model: Chrysler
Edelbrock part #7176 Performer RPM intake manifold is designed for 340-360 c.i.d. Chrysler V8's and 318 c.i.d. engines with 340-360 cylinder heads. Latest technology in dual-plane design results in both excellent low-rpm torque and outstanding high rpm horsepower. Recommended for high-performance street, strip and fresh water marine applications. Accepts 1975 and earlier waterneck only. Will not accept stock Thermo-Quad carburetor. Will not fit 1992 and later Magnum engines. Match with Performer RPM heads #60779 for maximum performance.

Brand: Edelbrock

Vehicle	Engine Version	Block	Engine	CID	CC
1980 - Chrysler New Yorker	N/R	V	8 Cyl 5.9L	360	-

1980 Chrysler New Yorker Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Action +Plus Intake Manifold

Part # P311-3DC90FB Manu # 8007WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $463.00

Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Square Bore Carburetors May Require PN[9006] To Seal Properly
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Rear Height: 5.940 In.
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
- High Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Engine VIN	Position	Block	Engine	CID	CC
1980 - Chrysler New Yorker	H	Lower	V	8 Cyl 5.2L	318	5211

1980 Chrysler New Yorker Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Stealth Intake Manifold

Part # P311-29C7E7A Manu # 8022WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $456.58

Stealth™ Intake Manifold
Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
Stealth(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Rear Height: 5.940 In.
- RPM Range: Idle-6800
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- High Rise/Dual Plane Design
- Square Bore Carburetor Mounting Flange
- No EGR Provisions
- Idle-6800 RPM Power Band
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!

Brand: Weiand

Position: Lower

Vehicle	Engine VIN	Position	Block	Engine	CID	CC
1980 - Chrysler New Yorker	H	Lower	V	8 Cyl 5.2L	318	5211

1980 Chrysler New Yorker Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Action +Plus Intake Manifold

Part # P311-3DC90FB Manu # 8007WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $463.00

Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Square Bore Carburetors May Require PN[9006] To Seal Properly~Rotary A/C Compressor Will Not Clear On 1978 And Later Applications~Legal Only For Off-Highway Use Or Racing
Action +Plus Intake Manifold; Lower; Power Band Idle-6000 RPM; High Rise; Universal Mounting Flange; 4.88 in. Front H/5.94 in. Rear H; No EGR Provisions; Satin Finish;
Action +Plus Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Rear Height: 5.940 In.
- RPM Range: Idle-6000
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
- High Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.

Brand: Weiand

Position: Lower

Vehicle	Position	Block	Engine	CID	CC
1980 - Chrysler New Yorker	Lower	V	8 Cyl 5.2L	318	5211

1980 Chrysler New Yorker Engine Intake Manifold - Lower 8 Cyl 5.2L Weiand - Stealth Intake Manifold

Part # P311-29C7E7A Manu # 8022WND Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $456.58

Stealth™ Intake Manifold
Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
Stealth™ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
Stealth(TM) Intake Manifold
Product Attributes:
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Rear Height: 5.940 In.
- RPM Range: Idle-6800
- Usage: Street/strip
- WARNING CA Proposition 65: No
Features:
- High Rise/Dual Plane Design
- Square Bore Carburetor Mounting Flange
- No EGR Provisions
- Idle-6800 RPM Power Band
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!

Brand: Weiand

Position: Lower

Vehicle	Engine VIN	Position	Block	Engine	CID	CC
1980 - Chrysler New Yorker	H	Lower	V	8 Cyl 5.2L	318	5211

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1980 Chrysler New Yorker Engine Intake Manifold