1980 Cadillac Seville Distributor Ignition - Cardone, Edelbrock, FAST, Holley, MSD, Pertronix

1980 Cadillac Seville Distributor 8 Cyl 5.7L Cardone - Distributor

Part # P311-57052AD Manu # 30-1804 Condition: Remanufactured

This Part Fits the Following OEM/Substitute Numbers: 1103405

Qty:

In Stock & Ready to Ship

Best Price: $163.19

Electronic Distributor
Distributor
Product Attributes:
- Coil Wire Included: No
- Distributor Cap Included: No
- Distributor Type: Magnetic Coil
- E-Waste: Yes
- Electronic Module Supplied: Yes
- Features and Benefits:
  - 100% New Points And Condensers Installed Where Applicable
  - All Electronic Module Components Are 100% Computer Tested To Ensure Full Functionality
  - Automated Test Equipment Verifies Signal Strength, Correct Polarity Of Wire Harness, Air Gap, Crank Reluctor Tooth Size, As Well As Ignition Coil And Pickup Performance
  - Guaranteed Fit And Function
  - Meets Or Exceeds O.e.m. Performance
  - O.e. Components With Consistently High Failure Rates Are 100% Replaced Or Repaired To Meet Or Exceed O.e. Performance
  - Precise Machining Tolerances Prevent Oil Leakage, Poor Timing, Setting Of The "check Engine" Light, And Premature Failure
  - Remanufactured Under Stringent Quality Standards To Ensure Product Reliability
- Ignition Rotor Included: No
- Integrated Ignition Coil: No
- Product Condition: Remanufactured
CARDONE Remanufactured Distributors provide reliable performance at the best price. Installing a CARDONE Distributor on your vehicle will ensure that proper voltage is transmitted to the spark plugs in the correct timing pattern so that your vehicle will perform on command.

Brand: Cardone

Vehicle	Fuel Type	Block	Engine	CID	CC
1980 - Cadillac Seville	GAS	V	8 Cyl 5.7L	350	-

1980 Cadillac Seville Distributor 8 Cyl 6.0L MSD - Pro-Billet Distributor

Part # P311-41CB961 Manu # 8363 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $573.59

Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear;CARB E.O. D-40-39
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear;
Pro-Billet Distributor
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Cadillac 368-500
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed for Cadillac 368/425/472 and 500 ci. engines
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Special oil tract improves lubrication to the dist./cam gear
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CARB E.O. Approved
Cadillac cruisers will be excited about this new Pro-Billet distributor for the 368, 425, 472 and 500 cubic inch engines. The Distributor begins life as a billet of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball-bearing and long sintered bushing for high-rpm accuracy.MSDs race proven magnetic pickup supplies a trigger signal that is accurate to within one degree at any rpm. Mounted above this pickup is an adjustable mechanical advance and is supplied with different springs and stop bushings for a number of curves. For street cruising economy, as if theres any such thing in a Caddy, there is a vacuum advance canister.

Brand: MSD

Vehicle	Block	Engine	CID	CC
1980 - Cadillac Seville	V	8 Cyl 6.0L	368	-

1980 Cadillac Seville Distributor 8 Cyl 6.0L MSD - Pro-Billet Distributor

Part # P311-41CB961 Manu # 8363 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $573.59

Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear;CARB E.O. D-40-39
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; Iron Gear;
Pro-Billet Distributor
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Cadillac 368-500
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Designed for Cadillac 368/425/472 and 500 ci. engines
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Special oil tract improves lubrication to the dist./cam gear
- Mech. advance assem. can be locked out for crank trigger systems
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Vacuum advance canister for improved economy (can be locked out)
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- CARB E.O. Approved
Cadillac cruisers will be excited about this new Pro-Billet distributor for the 368, 425, 472 and 500 cubic inch engines. The Distributor begins life as a billet of 6061-T6 aluminum before being CNC-machined to precise dimensions. The sturdy, flex-free housing is fitted with a sealed ball-bearing and long sintered bushing for high-rpm accuracy.MSDs race proven magnetic pickup supplies a trigger signal that is accurate to within one degree at any rpm. Mounted above this pickup is an adjustable mechanical advance and is supplied with different springs and stop bushings for a number of curves. For street cruising economy, as if theres any such thing in a Caddy, there is a vacuum advance canister.

Brand: MSD

Vehicle	Block	Engine	CID	CC
1980 - Cadillac Seville	V	8 Cyl 6.0L	368	-

1980 Cadillac Seville Distributor 8 Cyl 5.7L Edelbrock - Max Fire Distributor

Part # P311-0194230 Manu # 22764 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $477.65

Three Wire Hook-Up; Centerless Ground Shaft; High Output Magnetic Pickup; Large Paddle Wheel Reluctor;CARB E.O. For Use On Pre-Pollution Controlled Vehicles
Max-Fire Distributor for Oldsmobile 260-455 V8
Max Fire Distributor
Product Attributes:
- Distributor Type: High Performance
- Engine Make/Size: Olds 260-455
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chromium; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
Features:
- CNC Machined From 6061-T6 Alum. w/O-Ring Grooves
- For Use in Fully Machined Engine Block
- Cap And Rotor Are Molded In 30 Percent Glass Filled Polyester
- Features Brass Contacts
- Stainless Steel Rotor Spring For Max. Conductivity
- Hardened Iron Drive Gear Ensures Long Service Life
- Adj. Mechanical And Vacuum Adv. For Increased Mileage Potential
Edelbrock part #22764 Max-Fire distributor for Oldsmobile 260-455 V-8 engines is ready to run right out-of-the-box and are the perfect upgrade for your ignition system. They're ideal for replacing or upgrading from a points triggered distributor. They feature precision machining for a perfect fit along with a simple three wire hook up for an easy installation with no need to run an external ignition control box. The centerless ground shaft utilizes an upper sealed roller bearing with an extra long lower bronze Oil-Lite bushing for smooth operation. The high output magnetic pickup and large paddle wheel reluctor deliver a strong trigger signal at high RPM for maximum performance. All of these features allow Max-Fire distributors to provide unrivaled voltage to the coil, ensuring that you're getting maximum performance from your engine. We recommend a new Max-Fire coil for maximum voltage output, ensuring you get the most from your high performance engine at higher RPM's. Each distributor includes a cap, rotor, retainer and mechanical advance curve kit.FEATURES AND BENEFITS:- CNC machined from 6061-T6 aluminum with O-ring grooves for use in a fully machinedengine block- Cap and rotor are molded in high quality 30% glass filled polyester for durability andcarbon tracking resistance- Features brass contacts and a stainless steel rotor spring for maximum conductivity- Hardened iron drive gear ensures long service life- Fully adjustable mechanical and vacuum advance for increased mileage potential

Brand: Edelbrock

Vehicle	Block	Engine	CID	CC
1980 - Cadillac Seville	V	8 Cyl 5.7L	350	-

Distributor MSD

Part # P311-2D70FA1 Manu # 8566 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $521.00

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Oldsmobile V8; Iron Gear;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Oldsmobile V8
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- Supplied w/HEI style distributor cap/rotor (accepts Cap-A-Dapts)
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Mech. advance assem. can be locked out for crank trigger systems
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- QPQ coated polished steel shaft
- guided by 2 sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
Sharing the CNC machining techniques with the rest of the MSD Distributor line, the Olds housing is machined from high quality 6061-T6 aluminum. Adding to this strength are two sealed ball bearings that guide the 0.500 shaft accurately through 10,000+ rpm. TIG-welded on top of the polished steel shaft is MSDs adjustable mechanical advance assembly. To accurately trigger the ignition, a high-output magnetic pick-up is bolted to the base. This trigger pick-up produces a precise trigger signal. An MSD red cap with brass terminals and Race Rotor are supplied.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-07D7303 Manu # 83506 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $679.16

Pro-Billet Marine Ready-To-Run Distributor
Pro-Billet Marine Ready-To-Run Distributor; Ford 351C-460; Iron Gear; Red;
Product Attributes:
- Distributor Type: Ready To Run
- Engine Make/Size: Ford Marine 351c-460
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Only three wires to connect for a simple installation
- High output module produces quick starts/smooth idle/performance
- Accurate/maintenance-free magnetic pick-up never needs adjustment
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
- No MSD Ignition control required
MSDs Ready-to-Run Marine Distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These new distributors feature a powerful ignition module built into the billet aluminum housing. This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down, injection-molded cap, a maintenance-free magnetic pick-up produces accurate trigger signals while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom tailor a timing curve to match your application. The Ready-to-Run Distributors are a breeze to install. Simply drop it in the engine and connect three wires and youre ready-to-run across the lake! Supplied with a cap, rotor, gear and Weathertight wiring harness.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-28B734B Manu # 85221 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $352.58

Cam Sync Plug
Cam Sync Plug; Ford 289/302; CNC Billet Housing w/Black Anodized Cap; Plug-N-Play; Built-In L.E.D.; Supplied w/Steel Distributor Gear;
Product Attributes:
- Distributor Gear: Steel
- Distributor Type: Cam Sync Plug
- Engine Make/Size: Ford 289-302
- Sensor Type: Hall Effect
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Built-In LED Makes Set-Up And Indexing Quick And Easy
- CNC Billet Housing w/Black Anodized Cap
- Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
- Plug-N-Play w/Holley EFI
- Supplied w/Steel Distributor Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-52319DF Manu # 85061 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $352.58

Cam Sync Plug
Cam Sync Plug; Ford 351W; CNC Billet Housing w/Black Anodized Cap; Plug-N-Play; Built-In L.E.D.; Supplied w/Steel Distributor Gear;
Product Attributes:
- Distributor Gear: Steel
- Distributor Type: Cam Sync Plug
- Engine Make/Size: Ford 351w
- Sensor Type: Hall Effect
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- Built-In LED Makes Set-Up And Indexing Quick And Easy
- CNC Billet Housing w/Black Anodized Cap
- Compatible w/Other Aftermarket EFI Sys. Requiring Cam Sync Signal
- Plug-N-Play w/Holley EFI
- Supplied w/Steel Distributor Gear
MSDs cam sync plugs are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a hall-effect cam sync signal needed for the EFI system to reference the # 1 cylinder. For wet sump applications, the plug also drives the oil pump. MSDs cam syncs are plug and play with Holley EFI systems and can easily interface with most aftermarket EFI systems.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-1E96FDB Manu # 85463 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $505.84

Pro-Billet Distributor
Pro-Billet Distributor; For Use w/Chrysler 426/440 Engines; Must Be Used w/6/7/8 Series Ignition; Black;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Chrysler 426
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC machined billet aluminum housing
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- CNC machined billet aluminum housing and billet aluminum base
- Easy-to-adjust mechanical advance
- Supplied w/springs and stop bushings (except locked out versions)
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated for friction reduction
- Advance weight pins are staked and tig welded to the plate
- Nylon pads ensure smooth operation of the advance weights
- Mech. advance assem. can lock out for crank trigger/race app.
MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Distributor MSD

Part # P311-4887D96 Manu # 8594 Condition: New

Qty:

In Stock & Ready to Ship

Best Price: $523.58

Pro-Billet Distributor
Pro-Billet Distributor; Includes Cap/Race Rotor; Use w/MSD 6/7/8/10 Series Ignition; w/o Vacuum Advance; Ford FE; Iron Gear;
Product Attributes:
- Distributor Type: Hei/breakerless
- Engine Make/Size: Ford Fe
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
Features:
- CNC Machined Billet Alum. Housing and Billet Alum. Base
- Will not accept a vacuum advance or MSD Cap-A-Dapt
- Supplied w/An HEI Style Distributor Cap And Rotor
- Must Be Used w/An MSD Ignition Control
- Mech. advance assem. can be locked out for crank trigger systems
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
- Advance plate and weights are fine blanked from chrome moly steel
- QPQ coated polished steel shaft
- guided by sealed ball bearings
- Maintenance-free magnetic pickup and precision reluctor
- Creates stable trigger signals throughout the rpm range
- Easy-to-adjust mech. advance w/supplied springs and stop bushings
Racers and nostalgic Ford enthusiasts using the famous Ford FE engine now have access to a distributor that is truly equal to the performance level of their engine. A magnetic pick-up triggers your MSD Ignition Control accurately at any rpm. Above this pick-up the mechanical advance assembly is positioned so it can be adjusted without disassembling the distributor. In addition, the specially ground advance cam is tig-welded to the 9/16 hardened shaft and the weight pins are staked and TIG-welded to the advance plate.

Fitment Warning:
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.

Brand: MSD

Vehicle

Finish Selecting Your Vehicle

Shop By Brand

Showing Products For 1980 Cadillac Seville Distributor