Finish Selecting Your Vehicle

Choose your Engine for your 1980 Buick LeSabre

  • 6 Cyl 3.8L
  • 6 Cyl 4.1L
  • 8 Cyl 4.9L
  • 8 Cyl 5.7L

Shop By Brand

The Following brands are available based on your search.

  • ACDelco
    ACDelco
  • BBB Industries
    BBB Industries
  • Cardone
    Cardone
  • Centric
    Centric
  • Dynamic Friction
    Dynamic Friction
  • Mando
    Mando
  • Powerstop
    Powerstop
  • Raybestos
    Raybestos

Showing Products For 1980 Buick LeSabre Disc Brake Caliper

Below are all the different brands and applications for 1980 Buick LeSabre Disc Brake Caliper

Showing 1 - 10 of 26 Products for Disc Brake Caliper.

Refine Your Search

Cardone
1980 Buick LeSabre Disc Brake Caliper - Front Right Cardone - Remanufactured Brake Caliper

P311-39D9EB7    18-4020  New

18003761 , 18003761 , 18005265 , 18005265 , 18007946 , 18007946 , 18012309 , 18012309 , 18015428 , 18020904

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Right
  • Remanufactured Unloaded Caliper
  • Installation Hardware Included with Metal Piston
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.5
    • Bracket Included: No
    • Caliper Color: Gray/black
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number: K18007151
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Cast Iron
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Port Size:
      • 0.394
      • 10.00366
    • Inlet Thread Size: M10x1.5
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: Yes
    • Mounting Bracket Included: No
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.704
      • 17.87456
    • Mounting Hole Thread Diameter:
      • 0.704
      • 17.87456
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 2.935
      • 74.54
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Brand: Cardone
Position: Front Right
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Right
Cardone
1980 Buick LeSabre Disc Brake Caliper - Front Left Cardone - Remanufactured Brake Caliper

P311-2BA0B51    18-4021  New

18003760 , 18003760 , 18005264 , 18005264 , 18012308 , 18012308 , 18015427 , 18015427 , 18020903

Qty:
In Stock & Ready to Ship
$26.10 $38.44
Cardone Disc Brake Caliper  Front Left
  • Remanufactured Unloaded Caliper
  • Installation Hardware Included with Metal Piston
  • Remanufactured Brake Caliper
  • Product Attributes:
    • Abutment Clips Included: No
    • Anti-Rattle Spring Included: Yes
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Quantity: 1
    • Bleeder Thread Size: M10x1.5
    • Bracket Included: No
    • Caliper Color: Gray
    • Caliper Finish: Oil Emulsion
    • Caliper Slides Included: Yes
    • Caliper Type: Floating
    • Casting Number: K18007150
    • Contains Electronic Components: No
    • Disc Brake Caliper Casting Material: Cast Iron
    • Does it require SDS: No
    • Dust Boots Included: Yes
    • E-Waste: No
    • FAA_A1: Not Recommended. The O.e. Manufacturers Specified Steel Or Phenolic Pistons Based On The Intended Use Of The Vehicle. It Is Recommended That The Installer Follow The Manufacturer’s Recommendations.
    • FAA_A2: As A Rule, Always Use Brake Fluid Recommended By O.e. The Fluid Type Is Stamped On The Master Cylinder Reservoir Lid. Always Use New Fluid In A Sealed Container.
    • FAA_A3: Inspect Both Calipers For Binding Or Sticky Slides Or Pins. Also Ensure That Brake Hoses Are Not Collapsed Or Restricted And Inspect Steering/suspension Components For Proper Operation.
    • FAA_A4: Brake Squeal Can Be Caused By Improper Installation Of The Brake Pads, Improperly Installed Brake Hardware And Improper Brake Rotor Finish.
    • FAA_A5: A Symptom Of A Low Brake Pedal Is Usually Caused By Air In The System, Misadjusted Rear Brake Shoes, Deteriorated Brake Hose(s) Or A Defective Master Cylinder.
    • FAA_A6: A Silicone Grease Is Used On Floating Caliper Mounting Pins.
    • FAA_A7: New Hardware Is Included With All Of Our Calipers However The Mounting Bracket Is An Added Option Depending On Part Number And Application. Mounting Brackets Are Also Sold Separately For Most Applications.
    • FAQ_Q1: Can I Switch Out A Phenolic Piston Caliper For A Steel Piston Caliper Or Vice Versa?
    • FAQ_Q2: What Type Of Fluid Should I Use: Dot 3, Dot 4, Or Dot 5?
    • FAQ_Q3: Car Pulls To One Side During Braking. Why?
    • FAQ_Q4: Brakes Squeal All Of The Time. What's Causing The Squeal?
    • FAQ_Q5: Could Calipers Be The Cause Of A Low Brake Pedal?
    • FAQ_Q6: What Type Of Grease Is Used On Floating Caliper Mounting Pins?
    • FAQ_Q7: Do All Of Your Calipers Come With The New Hardware And A Mounting Bracket For Installation?
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Port Size:
      • 0.394
      • 10.00366
    • Inlet Thread Size: M10x1.5
    • Is Item A Chemical: No
    • Is Or Contains A Battery: No
    • Is Or Contains A Bulb: No
    • Is Prop Sixty Five Affected: No
    • Is the item CARB affected: No
    • Mounting Bolt Included: Yes
    • Mounting Bracket Included: No
    • Mounting Hardware Included: Yes
    • Mounting Hole Diameter:
      • 0.704
      • 17.87456
    • Mounting Hole Thread Diameter:
      • 0.704
      • 17.87456
    • Pad Wear Sensor Included: No
    • Pads Included: No
    • Piston Diameter:
      • 2.935
      • 74.54
    • Piston Material: Steel
    • Piston Quantity: 1
    • Product Condition: Remanufactured
    • Rust Resistant Coating: Yes
  • Features:
    • Pistons are durable, resistant to cracking or pitting and handle great loads.
    • Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
    • Mounting bracket is included where applicable for a hassle-free installation.
    • Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
    • New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
    • New bleeder screws provide trouble-free bleeding and a positive seal.
    • New washers are included where applicable for a proper seal.
    • A plastic cap plug protects every brake port thread to ensure trouble-free installation.
    • New stainless steel hardware clips and new mounting pins are included where applicable.
    • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
    • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Brand: Cardone
Position: Front Left
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Left
Centric
1980 Buick LeSabre Disc Brake Caliper - Front Right Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-2D0C262    141.62051  Remanufactured

Qty:
In Stock & Ready to Ship
$10.00 $21.71
Centric Disc Brake Caliper  Front Right
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.5
    • Bore Size mm: 75
    • Bore Size(s) millimeters: 75
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.00520
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.5
    • Piston 1 Diameter: 75.000
    • Piston 2 Diameter: 75.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Right
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Right
Centric
1980 Buick LeSabre Disc Brake Caliper - Front Left Centric - Centric Premium Semi-Loaded Disc Brake Calipers

P311-35FB7FA    141.62052  Remanufactured

Qty:
In Stock & Ready to Ship
$10.00 $21.71
Centric Disc Brake Caliper  Front Left
  • Centric Semi-Loaded Brake Caliper
  • Remanufactured to meet the most exacting standards for reliable performance. 100% pressure tested & inspected to ensure proper operation & fitment. Treated with anti-corrosion finish. Comes without brake pads. Includes hardware and brackets
  • Centric Premium Semi-Loaded Disc Brake Calipers
  • Product Attributes:
    • Attribute ID (Type): California Proposition 65
    • Bleeder Thread Diameter:
      • 10.000
      • M10x1.5
    • Bore Size mm: 75
    • Bore Size(s) millimeters: 75
    • Caliper Color: Gray
    • Friction Materials Standards Institute Pad Number: 10x.00520
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter:
      • 10.0
      • 10.000
      • M10x1.5
    • Piston 1 Diameter: 75.000
    • Piston 2 Diameter: 75.000
    • Piston Material: Steel
    • Prop 65 [cntrc]: California Proposition 65
  • Brake calipers are critical parts of the brake assembly. This Centric caliper is remanufactured to ensure predictable and reliable performance while providing long service life. To achieve like new condition and protection from rust; the part is tumble blasted then treated with an anti-corrosion finish. The caliper is 100% pressure tested and inspected to guarantee proper operation and fitment. Hardware and brackets are included; where applicable; to facilitate an easy installation. Founded in Southern California in 2000; Centric® achieved recognition for its aftermarket and brake components systems worldwide. Today the company is a leading manufacturer and supplier of brakes; big brake kits; high performance brakes; calipers; discs; rotors; pads; racing brakes; fluid; aftermarket brakes; armored vehicle brake upgrades; big brake kits (BBKs); OEM brake systems for everyday cars; heavy-duty vehicles; and high performance cars. All Centric products are known under the StopTech; C-Tek; Centric; and PosiQuiet labels and backed by quality research and development.
Brand: Centric
Position: Front Left
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Left
ACDelco
1980 Buick LeSabre Disc Brake Caliper - Front Left ACDelco

P311-2A2F601    18FR624  Remanufactured

Qty:
In Stock & Ready to Ship
$16.00 $41.63
ACDelco Disc Brake Caliper  Front Left
  • Remanufactured; Excludes Police & Taxi
Brand: ACDelco
Position: Front Left
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Left
ACDelco
1980 Buick LeSabre Disc Brake Caliper - Front Right ACDelco

P311-0C521BE    18FR623  Remanufactured

Qty:
In Stock & Ready to Ship
$16.00 $42.41
ACDelco Disc Brake Caliper  Front Right
  • Remanufactured; Excludes Police & Taxi
Brand: ACDelco
Position: Front Right
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Right
Powerstop
1980 Buick LeSabre Disc Brake Caliper - Front Left 6 Cyl 4.1L Powerstop - Autospecialty By Power Stop Remanufactured Calipers w/Brackets

P311-364DAD3    L4021  New

Qty:
In Stock & Ready to Ship
$58.13
Powerstop Disc Brake Caliper  Front Left
  • AS CALIPER W/O BRKT
  • Models with 11in rear drums~Models with 9in rear drums
  • Autospecialty Stock Replacement Brake Caliper
  • Autospecialty By Power Stop Remanufactured Calipers w/Brackets
  • Product Attributes:
    • Bleeder Screw Thread Diameter: 10mm
    • Bleeder Screw Thread Pitch: 1.50mm
    • Bleeder Screw Thread Size: M10 X 1.5
    • Caliper Casting Material: Cast Iron
    • Caliper Color: Gray
    • Caliper Piston Material: Steel
    • Caliper Type: Floating
    • Grade Type: Regular
    • Inlet Fitting Type: Banjo
    • Inlet Thread Diameter: 10.00mm
    • Inlet Thread Pitch: 1.50mm
    • Inlet Thread Size: M10 X 1.5
    • Mounting Bracket Included: No
    • Piston Diameter: 74.68mm
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message:
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium (hexavalent Compounds); Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium (hexavalent Compounds) Which Are Known To The State
      • Warning: This Product Can Expose You To Chemicals Including Lead; Chromium [hexavalent Compounds]; Nickel And Cobalt; Which Are Known To The State Of California To Cause Cancer; And Arsenic And Chromium [hexavalent Compounds] Which Are Known To The State
  • Features:
    • 100 Percent Pressure Tested To Prevent Leaks
    • Brand New Components
    • Includes Seals/boots/bleeder Screws/Hardware/Pins
    • High Temperature EPDM Rubber For Extended Life
    • Premium Silicone Lubrication For Smooth Operation
    • Remanufactured In Our Chicago IL Facility
  • Power Stop's Autospecialty OE Replacement Brake Calipers (Sold Individually) bolt directly in place of the stock calipers. Power Stop calipers and the brackets are remanufactured in our Chicago, IL facility. Power Stop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. Every caliper is expertly assembled using new seals, slide pins (where applicable), dust boots, bleeder screws, and stainless steel brake pad abutment clips. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. Power Stop Autospecialty OE Replacement Brake Calipers are perfect for the budget conscious consumer looking for a complete stock replacement brake kit!
Brand: Powerstop
Position: Front Left
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1980 - Buick LeSabre Front Left V 6 Cyl 4.1L 252 -
BBB Industries
1980 Buick LeSabre Disc Brake Caliper - Front Right BBB Industries - TechShield 360 (tm)

P311-10D24D5    97P17242A  New

Qty:
In Stock & Ready to Ship
$8.00 $23.86
  • TechShield 360 (tm)
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: 3/8-24 X 1
    • Bleeder Screw Thread (in): 3/8-24
    • Bracket Included: No
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: E-coat
    • Caliper Slides Included: Not Applicable
    • Disc Brake Caliper Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 18007151, N, R
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (in): 3/8-24
    • Inlet Port Thread Size (mm): M10-1.5 X 23.14
    • Inlet Thread Size: M10-1.5
    • Pads Included: No
    • Piston 1 Outside Diameter (in): 3
    • Piston 1 Outside Diameter (mm): 75
    • Piston Material: Steel
    • Piston Quantity: 1
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Right
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Right
BBB Industries
1980 Buick LeSabre Disc Brake Caliper - Front Left BBB Industries - TechShield 360 (tm)

P311-43F9BC3    97P17242B  New

Qty:
In Stock & Ready to Ship
$8.00 $23.86
  • TechShield 360 (tm)
  • Product Attributes:
    • Anti-Squeal Shims Included: No
    • Bleeder Screw Cap Included: No
    • Bleeder Screw Included: Yes
    • Bleeder Screw Size: 3/8-24 X 1
    • Bleeder Screw Thread (in): 3/8-24
    • Bracket Included: No
    • Bracket Mounting Bolts Included: No
    • Caliper And Pad Hardware Included: No
    • Caliper Color: Gray
    • Caliper Finish: E-coat
    • Caliper Slides Included: Not Applicable
    • Disc Brake Caliper Casting Material: Cast Iron
    • Dust Boots Included: Yes
    • Housing Cast Numbers: 18007150, N, L
    • Inlet Fitting Type: Banjo Bolt
    • Inlet Port Thread Size (in): 3/8-24
    • Inlet Port Thread Size (mm): M10-1.5 X 23.14
    • Inlet Thread Size: M10-1.5
    • Pads Included: No
    • Piston 1 Outside Diameter (in): 3
    • Piston 1 Outside Diameter (mm): 75
    • Piston Material: Steel
    • Piston Quantity: 1
    • Wear Sensors Included: No
Brand: BBB Industries
Position: Front Left
Additional Fitment Information:
Vehicle Position
1980 - Buick LeSabre Front Left

Showing 1 - 10 of 26 Products for Disc Brake Caliper.