Q-JET CARBURATOR, 650 CFM ELECTRIC CHOKE, "C" STYLE THROTTLE LINKAGE, 283-350 CI Engines
Product Attributes:
Prop 65 (C, R or CR):Cr
Features:
New, not rebuilt or remanufactured
Industry first fuel enrichment adjustment allowing up to 15 percent circuit rich lean
Universal replacement for most GM Applications
Includes most required vacuum ports
Complete with a one wire electric choke
Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
Brand: PRW
Additional Fitment Information:
Vehicle
Engine Version
Block
Engine
CID
CC
1980 - Buick LeSabre
Oldsmobile
V
8 Cyl 5.7L
350
-
1980 Buick LeSabre Carburetor PRW
P311-4BC13384228351New
Qty:
In Stock & Ready to Ship
$699.89
Q-JET CARBURATOR, 650 CFM ELECTRIC CHOKE
Q-JET CARBURATOR, 650 CFM ELECTRIC CHOKE, "U" STYLE THROTTLE LINKAGE, 283-350 CI Engines
Product Attributes:
Prop 65 (C, R or CR):Cr
Features:
All - New, not rebuilt or remanufactured
Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment
Universal replacement for most GM
Includes most required vacuum ports
Complete with a one wire electric choke
Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA!
Our new Rochester Quadrajet® carburetors are manufactured with all new components. They are a significant upgrade to stock carburetors for most GM Automotive applications. Every carburetor is equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. PRW carburetors are compatible with “C” and “U” style throttle linkages suitable for stock intake manifolds.
4 bbl
750cfm
Square Flange 4150
Manual Choke
Single Fuel Inlet Capability
Gasoline
Mechanical Secondary w/Velocity Air Valve
Universal Throttle Linkage Type
Satin Finish
Non-EGR Compatible~ Calibrated For Performance~ Electric Choke PN1478 Can Be Added If Needed~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer
May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes
Edelbrock Performer Series 750 cfm, Square-Flange, Manual Choke Carburetor (non-EGR)
RGL:Warning: This Product Can Expose You To Zinc, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Secondary Jet Diameter:0.107
Spring Force:5" Hg (orange)
The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Performer Carburetor #1411 750 CFM With Electric Choke, Satin Finish (Non-EGR)
4 bbl
750cfm
Square Flange 4150
Electric Choke
Single Fuel Inlet Capability
Gasoline
Mechanical Secondary w/Velocity Air Valve
Universal Throttle Linkage Type
Satin Finish
Non-EGR Compatible~ Calibrated For Fuel Economy With Performance~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer
May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes
Edelbrock Performer Series 750 cfm, Square-Flange, Electric Choke Carburetor (non-EGR)
RGL:Warning: This Product Can Expose You To Zinc, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Secondary Jet Diameter:0.107
Spring Force:5" Hg (orange)
The Edelbrock 1411 Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1411 Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.
Performer Carburetor #1403 500 CFM With Electric Choke, Satin Finish (Non-EGR)
4bbl.
500cfm
Square Flange 4150/Dual Quad 4150
Electric Choke
Single Fuel Inlet Capability
Gasoline
Mechanical Secondary w/Velocity Air Valve
Universal Throttle Linkage Type
Satin Finish
Non-EGR Compatible~ Calibrated For Performance~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer
May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Recom. CI Displacement For Small Block Dual Quad Apps Is 302-400+ cid~ Recom. CI Displacement For Big Block Dual Quad Apps Is 396-502+ cid
Edelbrock Performer Series 500 cfm, Square-Flange, Electric Choke Carburetor (non-EGR)
RGL:Warning: This Product Can Expose You To Zinc, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information, Visit Www.p65warnings.ca.gov.
Secondary Jet Diameter:0.095
Spring Force:5" Hg (orange)
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1403 Performer Series 500 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to "hold a tune", so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that's reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. Without a doubt the Edelbrock line of carburetor's are the most innovative and dependable street performance carburetor's available.
Brand: Edelbrock
Additional Fitment Information:
Vehicle
Engine Version
Block
Engine
CID
CC
1980 - Buick LeSabre
Pontiac
V
8 Cyl 4.9L
301
-
Carburetor PRW
P311-145C3664228371New
Qty:
In Stock & Ready to Ship
$725.89
MARINE Q-JET CARBURATOR, 650 CFM
MARINE Q-JET CARBURATOR, 650 CFM, ELECTRIC CHOKE, COMES WITH MERCRUISER MARINE LINKAGE, (MEETS U.S. COAST GUARD REQUIREMENTS)
Product Attributes:
Prop 65 (C, R or CR):Cr
Features:
New, not rebuilt or remanufactured
Industry first Lean/Rich adjustment allowing up to 15 percent rich lean main circuit adjustment
Universal replacement for most GM
Includes most required vacuum ports
Complete with a one wire electric choke
Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
Our Quadrajet carburetors are all new, with parts that you can trust to keep your engine running smoothly, mile after mile. It's also assembled and run tested right here in the USA! Our new Rochester Quadrajet carburetors are manufactured with all new components. In addition to our new Rochester Quadrajet carburetors.
Marine version is a great upgrade from stock GM marine carburetors and are also equipped with our industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease.
Our carburetors are compatible with Mercruiser Marine throttle linkages. Available in 650 CFM and 695 CFM and meets U.S. coast guard requirements. All - NEW, not rebuilt or remanufactured 650 & 695 CFM Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment. Universal replacement for most GM marine applications Includes most required vacuum ports Complete with a one wire electric choke Meets US Coast Guard requirements.
Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: PRW
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-3B19A8167302New
Qty:
In Stock & Ready to Ship
$688.95
750 CFM, Mechanical Secondary, Black & Purple
Sold Each
Product Attributes:
Adjustable Float Level:Yes
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Air Cleaner Flange Diameter:0.25
Barrel Quantity:4
Base Length:5.25
Base Plate Material:Billet Aluminum
Base Width:5.25
Body Color:Black
Body Height:3.25
Body Material:Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
Center Hung Floats:Yes
CFM:750 Cfm
Choke:No Choke
Choke Type:Manual
Discharge Nozzle Size (Primary / Secondary):.031 In. / .031 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Finish:Black Diamond Finish
Flange Shape:4150 & 8090
Flange Style:Square Bore
Flange Type:Square/4150
Float Material:Nitrophyl
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Gasket Or Seal Included:Yes
Grade Type:Performance
Idle/High Speed Air Bleed Sizes:70 / 35
Inlet Fitting Thread Diameter:0.875
Linkage Attached:Yes
Main Body Material:Lightweight Aluminum
Main Venturi Diameter:1.875
Marine Approved:No
Material:Aluminum
Metering Block Material:Billet Aluminum
Mounting Hardware Included:No
Mounting Hole Diameter:0.25
Mounting Hole Quantity:4
Needle & Seat:110
Number of Barrels:4
Part Type:Carburetor
Primary Jet Diameter:0.08
Primary Main Jet Size:74 / .078
Primary Power Valve (Hg):4.5
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Barrel Type:Mechanical
Secondary Jet Diameter:0.0975
Secondary Main Jet Size:83 / .093
Series:Black Race Series
Small Venturi Diameter:1.75
Spacer Included:No
Street Legal:Yes
Throttle Linkage:Universal
Features:
Lightweight Aluminum Construction
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components! (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown! (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A.! (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-025A93367304New
Qty:
In Stock & Ready to Ship
$794.95
950 CFM, Mechanical Secondary, Black & Purple
Sold Each
Product Attributes:
Adjustable Float Level:Yes
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):33 / 33
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Air Cleaner Flange Diameter:0.25
Barrel Quantity:4
Base Length:5.25
Base Plate Material:Billet Aluminum
Base Width:5.25
Body Color:Black
Body Height:3.25
Body Material:Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
Center Hung Floats:Yes
CFM:950 Cfm
Choke:No Choke
Choke Type:Manual
Discharge Nozzle Size (Primary / Secondary):.033 In. / .033 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Finish:Black Diamond Finish
Flange Shape:4150 & 8090
Flange Style:Square Bore
Flange Type:Square/4150
Float Material:Nitrophyl
Ford Kickdown Bracket Included:Yes
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Gasket Or Seal Included:Yes
Grade Type:Performance
Idle/High Speed Air Bleed Sizes:70 / 33
Inlet Fitting Thread Diameter:0.875
Linkage Attached:Yes
Main Body Material:Lightweight Aluminum
Main Venturi Diameter:1.875
Marine Approved:No
Material:Aluminum
Metering Block Material:Billet Aluminum
Mounting Hardware Included:No
Mounting Hole Diameter:0.25
Mounting Hole Quantity:4
Needle & Seat:120
Number of Barrels:4
Part Type:Carburetor
Primary Jet Diameter:0.089
Primary Main Jet Size:79 / .086
Primary Power Valve (Hg):4.5
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Barrel Type:Mechanical
Secondary Jet Diameter:0.1025
Secondary Main Jet Size:88 / .100
Series:Black Race Series
Small Venturi Diameter:1.75
Spacer Included:No
Street Legal:Yes
Throttle Linkage:Universal
Features:
Lightweight Aluminum Construction
Based on the wildly popular original Race Series carburetors, PROFORM's Black Race Series Carburetors include a Black Diamond coating for enhanced fuel cooling. Each carburetor is hand assembled and tested in the U.S. utilizing the PROFORM High-Flow Carburetor Main Body, durable billet metering blocks, high performance billet throttle baseplate, and lightweight aluminum fuel bowls. PROFORM Black Race Series Carbs include: (1) Adjustable High-Flow Aluminum Main Body with Screw-In Air Bleeds, Maximum Air Flow: No Air Horn, Choke Tower, or Choke Control, Uses standard service and tuning components! (2) Billet Throttle Base Plates: Adjustable Secondary Air Flow Cam Bracket, Solid Billet Construction, Manufactured in the U.S.A., Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Power Valve Blow Out Protection, Progressive Slip Link Mechanical Secondary Linkage, Serviceable Throttle Levers, and Ford Kickdown! (3) Billet Metering Blocks: Solid Billet Construction, Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, Manufactured in the U.S.A.! (4) Aluminum Fuel Bowls: Lightweight Aluminum, Sight Glass Windows for easy float adjustment!
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-0EB2E1E67199-ALCNew
Qty:
In Stock & Ready to Ship
$900.95
Mechanical Secondary
Sold Each
Product Attributes:
Adjustable Float Level:Yes
Air Cleaner Flange Diameter:0.25
Barrel Quantity:4
Base Length:5.25
Base Width:5.25
Body Color:Silver
Body Height:3.25
Body Material:Aluminum
Center Hung Floats:Yes
Choke Type:Manual
Flange Shape:4150 & 8090
Flange Type:Square/4150
Float Material:Nitrophyl
Gasket Or Seal Included:Yes
Grade Type:Performance
Inlet Fitting Thread Diameter:0.875
Linkage Attached:Yes
Main Venturi Diameter:1.875
Marine Approved:No
Mounting Hardware Included:No
Mounting Hole Diameter:0.375
Mounting Hole Quantity:4
Primary Jet Diameter:0.136
Secondary Barrel Type:Mechanical
Secondary Jet Diameter:0.136
Small Venturi Diameter:1.75
Spacer Included:No
Street Legal:Yes
Features:
Lightweight Aluminum Construction
PROFORM's Race Series carbs are now available for Alcohol setups. PROFORM's new Race Series Carburetor is hand assembled in the U.S. utilizing the PROFORM's Next Gen (new in 2022) High-Flow Carburetor Main Body, durable billet metering blocks, a high performance billet throttle baseplate, and Next Gen (new in 2022) Aluminum Fuel Bowls. The PROFORM Race Series Carb includes: PROFORM High-Flow Carburetor Main Body with Dyno-Proven Horsepower and Torque Gain, Adjustable Screw-In Air Bleeds, No Air Horn, Choke Tower, or Choke Control, and the best part is that it uses standard service and tuning components. PROFORM Billet Throttle Base Plates with Adjustable Secondary Air Flow Cam Bracket, and Power Valve Blow Out Protection, Timed and Full Vacuum Tubes for Accessories and Tuning, Button Torx Head Throttle Plate Screws, Slabbed Shafts, Slip-Link Mechanical Secondary Linkage, Serviceable Throttle Levers. PROFORM Billet Metering Blocks that are Durable, No Warping or Porosity Problems, Changeable Idle Feed Restriction, and new Fuel Control Baffling. PROFORM Next Gen Aluminum Fuel Bowls that are Lightweight and include Sight Glass Windows for easy float adjustment, and in 2022 Internal Baffling and a Lower Fuel Ramp for Increased Fuel Control.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Proform
Additional Fitment Information:
Vehicle
Carburetor Proform
P311-4E109C767201New
Qty:
In Stock & Ready to Ship
$657.95
Mechanical Secondaries
Sold Each
Product Attributes:
Adjustable Float Level:Yes
Air Bleed Material:Brass
Air Bleed Size (Inner High Speed):35 / 35
Air Bleed Size (Outer Idle):70 / 70
Air Bleeds Included:Yes
Air Cleaner Flange Diameter:0.25
Barrel Quantity:4
Base Length:5.25
Base Plate Material:Billet Aluminum
Base Width:5.25
Body Color:Silver
Body Height:3.25
Body Material:Aluminum
Booster Style:Down-leg Boosters
Calibration:Universal
Category:Carbs
Center Hung Floats:Yes
CFM:850 Cfm
Choke:No Choke
Choke Type:Manual
Discharge Nozzle Size (Primary / Secondary):.033 In. / .033 In.
EGR:Without Egr
Emissions:49 State Legal
Feature/Benefit:Lightweight Aluminum Construction
Finish:Vibratory Tumble Polished
Flange Shape:4150 & 8090
Flange Style:Square Bore
Flange Type:Square/4150
Float Material:Nitrophyl
Ford Kickdown Bracket Included:No
Fuel:Gasoline
Fuel Inlet:Dual
Fuel Inlet Thread:7/8-in. X20
Fuel Line Inlet Distance:9-11/16 Inch
Gasket Or Seal Included:Yes
Grade Type:Performance
Idle/High Speed Air Bleed Sizes:70 / 35
Inlet Fitting Thread Diameter:0.875
Linkage Attached:Yes
Main Body Material:Lightweight Aluminum
Main Venturi Diameter:1.875
Marine Approved:No
Material:Aluminum
Metering Block Material:Billet Aluminum
Mounting Hardware Included:No
Mounting Hole Diameter:0.25
Mounting Hole Quantity:4
Needle & Seat:120
Number of Barrels:4
Part Type:Carburetor
Primary Jet Diameter:0.087
Primary Main Jet Size:78 / .084
Primary Power Valve (Hg):4.5
Prop 65 (C, R or CR):Cr
Prop 65 Warning Chemical Listing:Lead
Prop 65 Warning Label:Prop65 Warning C And R.jpg
Secondaries:Mechanical Secondaries
Secondary Barrel Type:Mechanical
Secondary Jet Diameter:0.102
Secondary Main Jet Size:87.5 / .099
Series:Race Series
Small Venturi Diameter:1.75
Spacer Included:No
Street Legal:Yes
Throttle Linkage:Universal
Features:
Lightweight Aluminum Construction
Next Gen Race Series Carbs are HERE! PROFORM is taking its popular carburetors and making them even better! Here are the NEW Features: Main Body: Completely new main body design with contoured venturis and new 2-step down-leg boosters. The combination creates better air flow and increased fuel atomization! Fuel Bowls: Completely new design with increased internal baffling and a lower fuel ramp. The metering blocks also have a new baffle designed to work in conjunction with the bowl baffles to reduce fuel slosh and increase control. Throttle Base Plate: Slabbed shafts for increased airflow are now standard! In addition to these new features are all the great features that define the Race Series from the competition. Hand assembled and dyno tested in the U.S.A. by racers for racers! All PROFORM Race Series Carbs include the following: PROFORM's innovative all-aluminum next-gen main body with adjustable screw-in air bleeds and torx head squirters. Billet aluminum throttle base plate that is fully adjustable for fine tuning, and won't warp. The throttle lever is compatible with Ford kickdown bracketry, and the secondary opening rate can be adjusted with a linkage kit (sold separately). The billet aluminum metering blocks have a new fuel baffle design that integrates with the fuel bowl float for better fuel control. The metering blocks are fully adjustable as they always have been. Lastly, the aluminum fuel bowls with sight glass windows and billet fittings are a new design that is optimized with new features for better fuel control and easy float setting.
This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.