Choose Vehicle Year

  1. Previous
  2. Home
  3. 1979
  4. Oldsmobile
  5. Cutlass Calais
  6. Engine
  7. Engine Intake Manifold

Finish Selecting Your Vehicle

Choose your Engine for your 1979 Oldsmobile Cutlass Calais

  • 6 Cyl 3.8L
  • 8 Cyl 5.0L
  • 8 Cyl 5.7L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • FAST
    FAST
  • Ford Racing
    Ford Racing
  • Holley
    Holley
  • Racing Head Service (RHS)
    Racing Head Service (RHS)
  • Weiand
    Weiand

Showing Products For 1979 Oldsmobile Cutlass Calais Engine Intake Manifold

Below are all the different brands and applications for 1979 Oldsmobile Cutlass Calais Engine Intake Manifold

Showing 1 - 10 of 183 Products for Engine Intake Manifold.

Refine Your Search

Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Weiand - X-CELerator Intake Manifold

P311-369C2A4    7547-1  New

Qty:
In Stock & Ready to Ship
$305.34
Weiand Engine Intake Manifold Upper
  • Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • X-CELerator Intake Manifold; Upper; Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;
  • X-CELerator Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 3.090 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 4.060 In.
    • RPM Range: 2500-7000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design
    • Square Flange Carburetor Mounting
    • IMCalifornia Approved
    • Power Band 2500-7000 RPM
    • Height 3.09 in. Front
    • 4.06 in. Rear
    • Port Size 1.85 in. Height x 1.15 in. Width
    • No Provision For Divorced Or Hot Air Choke
  • This Weiand X-CELerator manifold was specifically designed with the IMCalifornia racer in mind. It is fully legal for use in IMCalifornia Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Upper V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Speed Warrior Intake Manifold

P311-5768F1B    8501WND  New

Qty:
In Stock & Ready to Ship
$414.60
Weiand Engine Intake Manifold Lower
  • Speed Warrior™ Intake Manifold
  • Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Utilizes Late Model Alternator an A/C Bracket Mounting Provisions~Has Additional Vacuum Tap Off~Legal Only For Off-Highway Use Or Racing
  • Speed Warrior™ Intake Manifold; Lower; Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;
  • Speed Warrior(TM) Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 4.190 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.270 In.
    • RPM Range: 1500-6700
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Port Size 1.92 in. Height x 1.16 in. Width
    • 1500-6700 RPM Power Band
    • Square Bore Carburetor Flange
    • Isolated Runners To Reduce Intake Charge Heating
    • Promotes Airflow Between Hot Engine/Intake Plenum
    • High Rise/Dual Plane Design
    • Precision CNC Machining
    • Permanent Mold Casting
    • Height Front 4.19 in.
    • Rear 5.27 in.
  • Speed Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-25CF409    8120P  New

Qty:
In Stock & Ready to Ship
$383.91
Weiand Engine Intake Manifold Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.500 In.
    • RPM Range: Idle-5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: No
  • Features:
    • Shiny Hand Polished Finish
    • Idle-5500 RPM Power Band
    • Height Front 3.50 in.
    • Rear 4.50 in.
    • Port Size 1.84 in. Height x 1.64 in. Width
    • CNC Machined
  • Street Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads - Polished Finish
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-38DBCBA    8120WND  New

Qty:
In Stock & Ready to Ship
$279.24
Weiand Engine Intake Manifold Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.500 In.
    • RPM Range: Idle-5500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Satin - As Cast - Finish For An Even Surface Texture
    • Precision CNC Machining
    • Idle-5500 RPM Power Band
    • Height Front 3.50 in.
    • Rear 4.50 in.
    • Port Size 1.84 in. Height x 1.64 in. Width
  • The Weiand Street Warrior is designed for use on stock or stroker combinations that feature efficient cylinder heads. The latest advances in cam design necessitated the design of a new intake manifold, and the Weiand Street Warrior manifolds fill that void. They are designed with computational fluid dynamics (CFD) software for optimized and consistent flow on every single manifold.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Weiand - X-CELerator Intake Manifold

P311-369C2A4    7547-1  New

Qty:
In Stock & Ready to Ship
$305.34
Weiand Engine Intake Manifold Upper
  • Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • X-CELerator Intake Manifold; Upper; Power Band 2500-7000 RPM; Low Rise; IMCA-Approved; Square Carb Mounting Flange; 3.09 in. Front H/4.06 in. Rear Height; Satin Finish;
  • X-CELerator Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 3.090 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 4.060 In.
    • RPM Range: 2500-7000
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design
    • Square Flange Carburetor Mounting
    • IMCalifornia Approved
    • Power Band 2500-7000 RPM
    • Height 3.09 in. Front
    • 4.06 in. Rear
    • Port Size 1.85 in. Height x 1.15 in. Width
    • No Provision For Divorced Or Hot Air Choke
  • This Weiand X-CELerator manifold was specifically designed with the IMCalifornia racer in mind. It is fully legal for use in IMCalifornia Stock Car and Sportmod Competition! This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand! If you are not satisfied with a Nostalgia Series intake, we will gladly exchange it or refund your money. Our tech service representatives can be reached at 1-866-464-6553.
Brand: Weiand
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Upper V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-38DBCBA    8120WND  New

Qty:
In Stock & Ready to Ship
$279.24
Weiand Engine Intake Manifold Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Satin Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.500 In.
    • RPM Range: Idle-5500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Satin - As Cast - Finish For An Even Surface Texture
    • Precision CNC Machining
    • Idle-5500 RPM Power Band
    • Height Front 3.50 in.
    • Rear 4.50 in.
    • Port Size 1.84 in. Height x 1.64 in. Width
  • The Weiand Street Warrior is designed for use on stock or stroker combinations that feature efficient cylinder heads. The latest advances in cam design necessitated the design of a new intake manifold, and the Weiand Street Warrior manifolds fill that void. They are designed with computational fluid dynamics (CFD) software for optimized and consistent flow on every single manifold.
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Speed Warrior Intake Manifold

P311-5768F1B    8501WND  New

Qty:
In Stock & Ready to Ship
$414.60
Weiand Engine Intake Manifold Lower
  • Speed Warrior™ Intake Manifold
  • Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Has Additional Vacuum Tap Off~Legal Only For Off-Highway Use Or Racing~Utilizes Late Model Alternator an A/C Bracket Mounting Provisions
  • Speed Warrior™ Intake Manifold; Lower; Power Band 1500-6700 RPM; High Rise; Square Bore Carb Flange; 4.19 in. Front H/5.27 in. Rear Height; Non-EGR; Satin Finish;
  • Speed Warrior(TM) Intake Manifold
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 4.190 In.
    • Fuel System Type: Carb
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.270 In.
    • RPM Range: 1500-6700
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Port Size 1.92 in. Height x 1.16 in. Width
    • 1500-6700 RPM Power Band
    • Square Bore Carburetor Flange
    • Isolated Runners To Reduce Intake Charge Heating
    • Promotes Airflow Between Hot Engine/Intake Plenum
    • High Rise/Dual Plane Design
    • Precision CNC Machining
    • Permanent Mold Casting
    • Height Front 4.19 in.
    • Rear 5.27 in.
  • Speed Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Weiand
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Lower 8 Cyl 5.0L Weiand - Street Warrior Intake Manifold

P311-25CF409    8120P  New

Qty:
In Stock & Ready to Ship
$383.91
Weiand Engine Intake Manifold Lower
  • Street Warrior™ Intake Manifold
  • Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
  • Street Warrior™ Intake Manifold; Lower; Power Band Idle-5500 RPM; Low Rise; 3.50 in. Front H/4.50 in. Rear Height; Non-EGR; Polished Finish;
  • Street Warrior(TM) Intake Manifold
  • Product Attributes:
    • Barrel: Four
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Chevy Small Block V8
    • Fuel System Type: Carb
    • Manifold Type: Low Rise
    • Number of Carbs: One
    • Rear Height: 4.500 In.
    • RPM Range: Idle-5500
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: No
  • Features:
    • Shiny Hand Polished Finish
    • Idle-5500 RPM Power Band
    • Height Front 3.50 in.
    • Rear 4.50 in.
    • Port Size 1.84 in. Height x 1.64 in. Width
    • CNC Machined
  • Street Warrior Intake Manifold non/EGR 262ci-400ci, 1955-1986 Cylinder Heads - Polished Finish
Brand: Weiand
Position: Lower
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Lower V 8 Cyl 5.0L 305 -
Holley
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - Sniper EFI Intake Manifold

P311-3C2554D    825011  New

Qty:
In Stock & Ready to Ship
$662.64
Holley Engine Intake Manifold Upper
  • Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;Legal for Racing Use Only
  • Sniper EFI Intake Manifold; Upper; Single Plane Carbureted; RPM Power Band 1800-7000; Silver w/Sniper Logo;
  • Sniper EFI Intake Manifold
  • Product Attributes:
    • Construction: Fabricated
    • Cylinder Head Type: Standard
    • Emission: Without Egr
    • Engine Make/Size: Small Block Chevy
    • Flange: 4150
    • Front Height: 6.259 In.
    • Number of Carbs: One
    • Port Size: 1.900 In. X 1.150 In.
    • Rear Height: 6.259 In.
    • RPM Range: 1800-7000
    • Style: Carbureted
    • Usage:
      • Racing
      • Street/hi-performance
    • Vacuum Port Quantity: None
    • WARNING CA Proposition 65: No
  • Features:
    • Budget Friendly Fabricated Intake Manifolds
    • 1/8 in. Thick Aluminum More Durable Than Competitive Intakes
    • Available In 92mm And 120mm Bore Throttle Body Openings
    • 100% TIG Welded
    • Available For EFI And Carbureted Apps w/Custom Holley Sniper Logo
  • Holley is now offering budget friendly fabricated intake manifolds for LS, Small Block Chevy and Small Block Ford engines in carbureted and EFI versions!
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Upper V 8 Cyl 5.0L 305 -
Holley
1979 Oldsmobile Cutlass Calais Engine Intake Manifold - Upper 8 Cyl 5.0L Holley - EFI Intake Manifold and Fuel Rail Kit

P311-3A4F4E0    300-260  New

Qty:
In Stock & Ready to Ship
$591.99
Holley Engine Intake Manifold Upper
  • Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;Legal for Non-Emissions Controlled Vehicles Or For Race Use
  • EFI Intake Manifold and Fuel Rail Kit; Upper; Single Plane; For Use w/4150 Style Throttle Body; 4.18 in. Front H/5.28 in. Rear H; 2500-7500 RPM Power Band; Satin;
  • EFI Intake Manifold and Fuel Rail Kit
  • Product Attributes:
    • Construction: Cast
    • Cylinder Head Type: Standard
    • Emission: N/a
    • Engine Make/Size: Chevy Small Block V8
    • Front Height: 4.180 In.
    • Fuel System Type: Efi
    • Manifold Type: High Rise
    • Number of Carbs: One
    • Rear Height: 5.280 In.
    • RPM Range: 2500-7500
    • Usage: Street/strip
    • WARNING CA Proposition 65: No
  • Features:
    • Single Plane Design With Isolated Plenum
    • 4150 Square Bore Mounting Flange
    • 2500-7500 RPM Power Band
    • Front 4.18 in. / Rear 5.28 in. Height
    • 1.92 in. Height / 120 in. Width Port Size
    • Lower Throttle Body Mounting Height To Help w/Hood Clearance
    • Holley Laser Etched Logos On Black Coated Fuel Rails
    • Bracket Asst. Includes So You Can Install Injectors Of Your Choice
    • Fuel Injectors Are Not Included
    • Fuel Rail Designed For Max Throttle Lever Clearance
  • The new single plane EFI intake manifold is designed to provide a broad RPM powerband for high-performance street/strip engine applications to a maximum engine speed of 7500 RPM. The manifold is designed to work with 4150 Style Throttle body EFI systems like the Holley 4150 style flange Universal Throttle Bodies. These intake manifolds are designed to accept most stock hardware and accessory brackets, but offer performance features; like an updated plenum divider area, a 1 in. shorter overall height than most single plane manifolds, and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. The fuel injector bores have back-cut exits in the runners for better fuel atomization. This design points the injectors at an angle to match the intake runner airflow angle. The black coated fuel rails and rail bracket assortment are included with the manifold for any easy installation with the injectors that you choose to use for your combination. Fuel rail designed for maximum throttle lever clearance.(Injectors are not included)The 300-260 intake manifolds are designed 4150 style Throttle Body EFI applications on 1957-86 262-400cid Small Block Chevrolet engines and SBC engines equipped with 1987-91 L98 aluminum Corvette cylinder heads (non-EGR applications). Also, these manifolds will work with any SBC engine equipped with aftermarket cylinder heads, as long as they have a standard port flange opening and mounting bolt locations. Also Available: 20-86 Throttle Cable Bracket, 20-87 Kickdown Cable Bracket
Brand: Holley
Position: Upper
Additional Fitment Information:
Vehicle Position Block Engine CID CC
1979 - Oldsmobile Cutlass Calais Upper V 8 Cyl 5.0L 305 -

Showing 1 - 10 of 183 Products for Engine Intake Manifold.