
P311-29C7E7A 8022WND New
- Stealthâ„¢ Intake Manifold
- Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;Legal for Non-Emissions Controlled Vehicles Or For Race Use Legal Only For Off-Highway Use Or Racing
- Stealthâ„¢ Intake Manifold; Lower; Power Band Idle-6800 RPM; High Rise; Square Bore Carb Mounting Flange; 4.88 in. Front H/5.94 in. Rear Height; No EGR Provisions; Satin Finish;
- Stealth(TM) Intake Manifold
- Product Attributes:
-
- Barrel: Four
- Construction: Cast
- Cylinder Head Type: Standard
- Emission: Without Egr
- Engine Make/Size: Chrysler Small Block V8
- Front Height: 4.880 In.
- Fuel System Type: Carb
- Manifold Type: High Rise
- Rear Height: 5.940 In.
- RPM Range: Idle-6800
- Usage: Street/strip
- WARNING CA Proposition 65: No
-
Features:
- High Rise/Dual Plane Design
- Square Bore Carburetor Mounting Flange
- No EGR Provisions
- Idle-6800 RPM Power Band
- Height Front 4.88 in.
- Rear 5.94 in.
- Port Size 1.96 in. Height x 1.00 in. Width
- Stealth Intake Manifold 318 (late style), 340, 360 V8 This manifold is part of the Weiand Nostalgia Series of intake manifolds. Weiand Nostalgia Series intake manifolds are made using the original tooling, and may have minor appearance imperfections that do not affect the functionality of the part. These minor blemishes are a natural part of the casting process when using the original sand casting tooling. Weiand Nostalgia series intakes are proudly cast and machined in the USA. We support all areas of the vintage, show, and nostalgia car hobby, and want to continue to produce these lower volume manifolds using the original tools. There is no need to search for that vintage intake at swap meets or on the internet when you can buy the real deal new from Weiand!