Finish Selecting Your Vehicle

Choose your Engine for your 1977 Pontiac Bonneville

  • 8 Cyl 4.9L
  • 8 Cyl 5.7L
  • 8 Cyl 6.6L

Shop By Brand

The Following brands are available based on your search.

  • Centerforce
    Centerforce
  • Fidanza Performance
    Fidanza Performance
  • Ford Racing
    Ford Racing
  • Hays
    Hays
  • PRW
    PRW
  • Ram
    Ram

Showing Products For 1977 Pontiac Bonneville Clutch Flywheel

Below are all the different brands and applications for 1977 Pontiac Bonneville Clutch Flywheel

Showing 1 - 10 of 22 Products for Clutch Flywheel.

Refine Your Search

Ram
1977 Pontiac Bonneville Clutch Flywheel Ram - Steel Flywheel

P311-2FBA0F5    1557  New

Qty:
In Stock & Ready to Ship
$333.27
  • steel flywheel
  • 2.75 Register; 166 Teeth; 0 Balance
  • Steel flywheel Pontiac 1964-72/2.75 register/166T/0 bal.
  • Steel Flywheel
  • Features:
    • Dynamically Balanced Within 1/2 oz./in. Of Factory Specifications
    • Surface Ground For Optimum Disc Mating Surface
    • Strictly Factory Warranty Only
  • The flywheel accepts one half of the load of the clutch system. To realize the potential of the clutch system, the flywheel must be flat, parallel to the crankshaft flange, properly surface ground for maximum friction compatibility with the clutch disc, and balanced. Dyno testing proves that flywheel balance is critical to achieving maximum engine service. Every RAM flywheel is dynamically balanced to within ? ounce/inch of the factory specification. RAM aluminum flywheels have a .250 inch thick steel friction insert to handle the heat generated under extreme conditions, while allowing resurfacing without the need to replace the insert. All RAM flywheels are manufactured from SFI certified materials in our South Carolina facility.
Brand: Ram
Additional Fitment Information:
Vehicle
1977 - Pontiac Bonneville
Hays
1977 Pontiac Bonneville Clutch Flywheel 8 Cyl 6.6L Hays - Performance Flywheel

P311-1F500E0    13-130  New

Qty:
In Stock & Ready to Ship
$540.50
Hays Clutch Flywheel
  • Steel; Neutral Internal Balance; w/Large Register Bore; 166 Tooth; 30 lbs.
  • Performance Flywheel; Steel; Neutral Internal Balance; w/Large Register Bore; 166 Tooth; 30 lbs.;
  • Performance Flywheel
  • Product Attributes:
    • Center Bore Diameter: 2.750 In.
    • Engine Balance: Internal
    • SFI Certification: 1.1
    • Tooth Quantity: 166
    • WARNING CA Proposition 65: No
  • Features:
    • Billet Construction
    • SFI Certified
    • 30 LB Flywheel With 166 Tooth Count
    • Fits 10.5/11 In. Clutches
    • 2.75 In. Register Bore
    • Limited 90 Day Warranty
  • These SFI-Rated flywheels are engineered to handle extreme duty applications and designed to take the punishment of todays high horsepower engines. Our billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. For internally balanced engines. Includes a removable black insert that allows this to fit the 2.5 crank and remove to fit the 2.75 .
Brand: Hays
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Pontiac Bonneville V 8 Cyl 6.6L 400 -
Fidanza Performance
1977 Pontiac Bonneville Clutch Flywheel 8 Cyl 6.6L Fidanza Performance

P311-3386168    198681  New

Qty:
In Stock & Ready to Ship
$502.89
Fidanza Performance Clutch Flywheel
  • Flywheel-Aluminum PC C1; High Performance; Lightweight with Repl Friction
  • Aluminum Flywheel 168T Ring Gear.
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Prop 65 - Short Label: Fidanza_performance_prop_65_warning_label.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Fidanza Flywheel-aluminum Pc C1; High Performance; Lightweight With Replaceable Friction
  • Features:
    • High Performance And Lighter Weight To Free Additional Horsepower
    • Military Spec Fasteners For Reliability And Strength
    • Bolt-on Replaceable Friction Plate
    • Stepped Dowels On Most Applications
    • Billet 6061 T6 Or 2024 T4 Aluminum Body
    • Replaceable Hardened 1050 Steel Ring Gear
    • Lower MOI For Faster Throttle Response
    • 40-60 Percent Lighter Than Stock For Quicker Acceleration
    • Heat Treated Friction Plate For Optimum Grip And Long Life
Brand: Fidanza Performance
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Pontiac Bonneville V 8 Cyl 6.6L 403 -
Fidanza Performance
1977 Pontiac Bonneville Clutch Flywheel 8 Cyl 6.6L Fidanza Performance

P311-35F35E6    198541  New

Qty:
In Stock & Ready to Ship
$512.55
Fidanza Performance Clutch Flywheel
  • Flywheel-Aluminum PC C12; High Performance; Lightweight with Repl Friction
  • 153 Tooth Ring Gear For 383 or 400 C.I.D. engine must use part #624001 balance plate For 454 C.I.D. engine must use part #624541 balance plate For 502 C.I.D. engine must use part #625021 balance plate
  • Aluminum Flywheel 153T Ring Gear.
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Prop 65 - Short Label: Fidanza_performance_prop_65_warning_label.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Fidanza Flywheel-aluminum Pc C12; High Performance; Lightweight With Replaceable Friction
  • Features:
    • High Performance And Lighter Weight To Free Additional Horsepower
    • Military Spec Fasteners For Reliability And Strength
    • Bolt-on Replaceable Friction Plate
    • Stepped Dowels On Most Applications
    • Billet 6061 T6 Or 2024 T4 Aluminum Body
    • Replaceable Hardened 1050 Steel Ring Gear
    • Lower MOI For Faster Throttle Response
    • 40-60 Percent Lighter Than Stock For Quicker Acceleration
    • Heat Treated Friction Plate For Optimum Grip And Long Life
Brand: Fidanza Performance
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Pontiac Bonneville V 8 Cyl 6.6L 403 -
Fidanza Performance
1977 Pontiac Bonneville Clutch Flywheel 8 Cyl 6.6L Fidanza Performance

P311-35F35E6    198541  New

Qty:
In Stock & Ready to Ship
$512.55
  • Flywheel-Aluminum PC C12; High Performance; Lightweight with Repl Friction
  • 153 Tooth Ring Gear For 383 or 400 C.I.D. engine must use part #624001 balance plate For 454 C.I.D. engine must use part #624541 balance plate For 502 C.I.D. engine must use part #625021 balance plate
  • Aluminum Flywheel 153T Ring Gear.
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Prop 65 - Short Label: Fidanza_performance_prop_65_warning_label.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Fidanza Flywheel-aluminum Pc C12; High Performance; Lightweight With Replaceable Friction
  • Features:
    • High Performance And Lighter Weight To Free Additional Horsepower
    • Military Spec Fasteners For Reliability And Strength
    • Bolt-on Replaceable Friction Plate
    • Stepped Dowels On Most Applications
    • Billet 6061 T6 Or 2024 T4 Aluminum Body
    • Replaceable Hardened 1050 Steel Ring Gear
    • Lower MOI For Faster Throttle Response
    • 40-60 Percent Lighter Than Stock For Quicker Acceleration
    • Heat Treated Friction Plate For Optimum Grip And Long Life
Brand: Fidanza Performance
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Pontiac Bonneville V 8 Cyl 6.6L 403 -
Fidanza Performance
1977 Pontiac Bonneville Clutch Flywheel 8 Cyl 6.6L Fidanza Performance

P311-3386168    198681  New

Qty:
In Stock & Ready to Ship
$502.89
  • Flywheel-Aluminum PC C1; High Performance; Lightweight with Repl Friction
  • Aluminum Flywheel 168T Ring Gear.
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Chromium, Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
    • Prop 65 - Short Label: Fidanza_performance_prop_65_warning_label.jpg
    • Prop 65 (C, R or CR): Cr
    • Title: Fidanza Flywheel-aluminum Pc C1; High Performance; Lightweight With Replaceable Friction
  • Features:
    • High Performance And Lighter Weight To Free Additional Horsepower
    • Military Spec Fasteners For Reliability And Strength
    • Bolt-on Replaceable Friction Plate
    • Stepped Dowels On Most Applications
    • Billet 6061 T6 Or 2024 T4 Aluminum Body
    • Replaceable Hardened 1050 Steel Ring Gear
    • Lower MOI For Faster Throttle Response
    • 40-60 Percent Lighter Than Stock For Quicker Acceleration
    • Heat Treated Friction Plate For Optimum Grip And Long Life
Brand: Fidanza Performance
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Pontiac Bonneville V 8 Cyl 6.6L 403 -
PRW
Clutch Flywheel PRW

P311-2CF80A0    1645570  New

Qty:
In Stock & Ready to Ship
$324.80
PRW Clutch Flywheel
  • Flywheel
  • Flywheel; Billet Steel; SFI-Spec 1.1; External Balance; 33 Lbs.; 166 Teeth; Removable Weight; 2.75 in. Or 2.50 in. Choke Ring; Fits 64-85 Pontiac 326-455 CID;
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
  • Features:
    • SFI Certified
    • Manufactured From 1045 Billet Steel
    • CAD Engineered And CNC Machined
    • Award Winning Designs Year After Year
  • PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: PRW
Additional Fitment Information:
Vehicle
PRW
Clutch Flywheel PRW

P311-1032513    1645580  New

Qty:
In Stock & Ready to Ship
$313.86
PRW Clutch Flywheel
  • Flywheel
  • Flywheel; Billet Steel; SFI-Spec 1.1; External Balance; 32 Lbs.; 166 Teeth; Removable Counterweight; Fits 64-85 Olds 307/350-455 CID & 68-70 Olds 400 CID;
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
  • Features:
    • SFI Certified
    • Manufactured From 1045 Billet Steel
    • CAD Engineered And CNC Machined
    • Award Winning Designs Year After Year
  • PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: PRW
Additional Fitment Information:
Vehicle
PRW
Clutch Flywheel PRW

P311-4C36AAD    1628300  New

Qty:
In Stock & Ready to Ship
$256.28
PRW Clutch Flywheel
  • Flywheel
  • Flywheel; Billet Steel; SFI-Spec 1.1; Neutral Balance; Lightweight 21.4 Lbs.; 168 Teeth; Fits Small Block Chevy Gen I;
  • Product Attributes:
    • Prop 65 - Short Label: Prop65_warning.jpg
    • Prop 65 (C, R or CR): Cr
  • Features:
    • SFI Certified
    • Manufactured From 1045 Billet Steel
    • CAD Engineered And CNC Machined
    • Award Winning Designs Year After Year
  • PRW SFI-Rated flywheels raise the bar in the high performance industry. The combination of top quality and reasonable pricing sets new standards. We know that when you receive your new PRW performance components, you will have no trouble seeing what the excitement is all about. These SFI-Rated Flywheels are engineered to handle extreme duty applications and designed to take the punishment of today's high horsepower engines. PRW billet steel flywheels are CAD engineered and precision CNC machined to strict tolerances. The choice of 5 out of 6 winning engine builders at the Engine Master Challenge four years running, PRW billet steel flywheels were awarded Best New Product of the Year at the 2006 Hotrod & Restoration Show. Every flywheel is engineered for excellence and rigorously inspected throughout the manufacturing cycle to ensure that our customers receive the quality that they have come to expect from PRW products.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: PRW
Additional Fitment Information:
Vehicle
Centerforce
Clutch Flywheel Centerforce

P311-27AFF8E    700148  New

Qty:
In Stock & Ready to Ship
$374.95
Centerforce Clutch Flywheel
  • Centerforce(R) Flywheels; Steel
  • Centerforce(R) SFI-certified steel flywheels are CNC-machined from billet steel for precise; no-hassle; bolt-in installation.
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • High Quality Billet Steel
    • Cad/cam Designed And Cnc Machined
    • Precision Balanced
    • No-hassle Bolt-in
    • Domestic And Import Applications
  • Centerforce(R) steel flywheels are manufactured from high quality billet steel and match closely to the original equipment flywheel weight. Billet steel flywheels are available for popular import and domestic vehicles, including trucks. Centerforce steel flywheels are CAD/CAM-designed and CNC-machined from billet steel for precise, no-hassle, bolt-in installation. Centerforce billet steel flywheels are SFI-certified, so you know that you can count on them, on the street and on the track.

  • This is a Universal/Non Application Specific Product. To install this part, you made need to cut, weld, or make other modifications to your vehicle.
Brand: Centerforce
Additional Fitment Information:
Vehicle

Showing 1 - 10 of 22 Products for Clutch Flywheel.