802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 1977 Chevrolet K30

  • 6 Cyl 4.8L
  • 8 Cyl 5.7L
  • 8 Cyl 6.6L
  • 8 Cyl 7.4L

Shop By Brand

The Following brands are available based on your search.

  • ATP
    ATP
  • B&M
    B&M
  • Pioneer Cable
    Pioneer Cable

Showing Products For 1977 Chevrolet K30 Automatic Transmission Flexplate

Below are all the different brands and applications for 1977 Chevrolet K30 Automatic Transmission Flexplate

Showing 21 - 28 of 28 Products for Automatic Transmission Flexplate.

Refine Your Search

ATP
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 5.7L ATP

P311-075BB44    Z-460  New

471598 , 340296 , Z-460 , FRA-100HD , FRA100HD

Qty:
$48.84
ATP Automatic Transmission Flexplate
  • ATP Improved Heavy Duty Automatic Transmission Flex Plate
  • ; Improved Heavy Duty Teeth: 168 Outer Diameter: 14.13" Bolt Hole Size: 5/16" Excludes Racing Eng.
  • Product Attributes:
    • Contents or Additional Details: For Internally Balanced Engine With 2 Piece Crank Seal. Torque Converter Mounting Hole Spread Is 11.25 Inches
    • LineCode: Atp4
    • Outer Diameter: 14.13
    • Pitch Flywheels: 12 To 14
    • Teeth: 168
    • Weight Added: N
  • Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The ATP heavy duty flex plate offers superior strength because the ring gear is welded on both sides to the center plate. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability.
Brand: ATP
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Pioneer Cable
1977 Chevrolet K30 Automatic Transmission Flexplate 6 Cyl 4.8L Pioneer Cable

P311-02623FE    FRA-153  New

Qty:
$73.73
Brand: Pioneer Cable
Additional Fitment Information:
Vehicle Engine VIN Fuel Delivery Type Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 T CARB THM400 L 6 Cyl 4.8L 292 -
Pioneer Cable
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 7.4L Pioneer Cable

P311-56352F2    FRA-141  New

Qty:
$40.57
  • ; with Weight
Brand: Pioneer Cable
Additional Fitment Information:
Vehicle Engine VIN Fuel Delivery Type Block Engine CID CC
1977 - Chevrolet K30 S CARB V 8 Cyl 7.4L 454 -
Pioneer Cable
1977 Chevrolet K30 Automatic Transmission Flexplate 6 Cyl 4.8L Pioneer Cable

P311-02623FE    FRA-153  New

Qty:
$73.73
  • ; Teeth: 168 Outer Diameter: 14"
Brand: Pioneer Cable
Additional Fitment Information:
Vehicle Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 THM400 L 6 Cyl 4.8L 292 -
B&M
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 5.7L B&M - Automatic Transmission Flexplate

P311-5A98C7A    20230  New

Qty:
$122.34
  • FLEXPLATE 168 TOOTH
  • ; Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled [Non-Emissions Controlled] Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
  • Automatic Transmission Flexplate
  • Product Attributes:
    • Balance: Internal
    • California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
    • Crankshaft Bolt Hole Quantity: 6
    • Dual Pattern: No
    • IHRA Legal: Yes
    • Item Weight: 7.000 Lbs.
    • NHRA Accepted: Yes
    • Outside Diameter: 14.100 In.
    • SFI Approved: Yes
    • SFI Certification Sticker: Included
    • Timing Marks: 168
    • Title: B&m 20230 Flexplate, Sfi 29.1 Approved, Fits 168-tooth, 2-piece Rear Main Seal, Chevy V8
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Cadmium And Cadmium Compounds Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm (for More Information Go To Www.p65warnings.ca.gov)
  • As performance levels increase, an O.E. style flexplate just won't cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Brand: B&M
Additional Fitment Information:
Vehicle Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 THM400 V 8 Cyl 5.7L 350 -
B&M
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 5.7L B&M - Automatic Transmission Flexplate

P311-29C15F8    20237  New

Qty:
$119.00
  • FLEXPLATE 153 TOOTH 55-85 SB CHEV
  • ; Standard SFI; Internal Balance; 153 Tooth; Dual; 10.75 in. Bolt Circle This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled [Non-Emissions Controlled] Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
  • Automatic Transmission Flexplate
  • Product Attributes:
    • Balance: Internal
    • California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
    • Crankshaft Bolt Hole Quantity: 6
    • Dual Pattern: No
    • IHRA Legal: Yes
    • Item Weight: 6.000 Lbs.
    • NHRA Accepted: Yes
    • Outside Diameter: 12.840 In.
    • SFI Approved: Yes
    • SFI Certification Sticker: Included
    • Timing Marks: 153
    • Title: B&m 20237 Flexplate, 153 Tooth 55-85 Shortblock Chevy
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Cadmium And Cadmium Compounds Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm (for More Information Go To Www.p65warnings.ca.gov)
  • As performance levels increase, an O.E. style flexplate just won't cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 small block Chevy V8 engines (internally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 inch bolt pattern, 153 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Brand: B&M
Additional Fitment Information:
Vehicle Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 THM400 V 8 Cyl 5.7L 350 -
B&M
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 6.6L B&M - Automatic Transmission Flexplate

P311-3DFC52E    20232  New

Qty:
$131.24
  • FLEXPLATE 168 TOOTH 400 CID
  • ; Standard SFI; External Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled [Non-Emissions Controlled] Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
  • Automatic Transmission Flexplate
  • Product Attributes:
    • Balance: External
    • California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
    • Crankshaft Bolt Hole Quantity: 6
    • Dual Pattern: No
    • IHRA Legal: Yes
    • Item Weight: 7.500 Lbs.
    • NHRA Accepted: Yes
    • Outside Diameter: 14.100 In.
    • SFI Approved: Yes
    • SFI Certification Sticker: Included
    • Timing Marks: 168
    • Title: B&m 20232 Flexplate, 168 Tooth 400 Cid
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Cadmium And Cadmium Compounds Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm (for More Information Go To Www.p65warnings.ca.gov)
  • As performance levels increase, an O.E. style flexplate just won't cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 400ci small block chevy V8 engines (externally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Brand: B&M
Additional Fitment Information:
Vehicle Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 THM400 V 8 Cyl 6.6L 400 -
B&M
1977 Chevrolet K30 Automatic Transmission Flexplate 8 Cyl 7.4L B&M - Automatic Transmission Flexplate

P311-0486BC1    20233  New

Qty:
$119.00
  • FLEXPLATE 168 TOOTH 454 CID
  • ; Standard SFI; External Balance; 168 Tooth; Dual; 10.75 in. and 11.5 in. Bolt Circle This part is legal for sale or use on Emissions Controlled Vehicles; Uncontrolled [Non-Emissions Controlled] Vehicles; and Racing Use Only Vehicles because it does not affect vehicle emissions and is not covered by emissions regulations
  • Automatic Transmission Flexplate
  • Product Attributes:
    • Balance: External
    • California Proposition 65 Chemical Name 1: Cadmium And Cadmium Compounds
    • Crankshaft Bolt Hole Quantity: 6
    • Dual Pattern: Yes
    • IHRA Legal: Yes
    • Item Weight: 7.500 Lbs.
    • NHRA Accepted: Yes
    • Outside Diameter: 14.100 In.
    • SFI Approved: Yes
    • SFI Certification Sticker: Included
    • Timing Marks: 168
    • Title: B&m 20233 Flexplate For 168 Tooth 454 Cid Engine
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Cadmium And Cadmium Compounds Which Are Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm (for More Information Go To Www.p65warnings.ca.gov)
  • As performance levels increase, an O.E. style flexplate just won't cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1965-90 Chevrolet big block 454ci (externally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions
Brand: B&M
Additional Fitment Information:
Vehicle Transmission Manuf. Code Block Engine CID CC
1977 - Chevrolet K30 THM400 V 8 Cyl 7.4L 454 -

Showing 21 - 28 of 28 Products for Automatic Transmission Flexplate.