802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 1977 Chevrolet K30

  • 8 Cyl 5.7L
  • 8 Cyl 6.6L
  • 8 Cyl 7.4L

Showing Products For 1977 Chevrolet K30 Engine Camshaft and Lifter Kit

Below are all the different brands and applications for 1977 Chevrolet K30 Engine Camshaft and Lifter Kit

Showing 1 - 6 of 6 Products for Engine Camshaft and Lifter Kit.

Refine Your Search

Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 6.6L Edelbrock - Performer-Plus Camshaft Kit

P311-43DA816    2102  New

Qty:
$215.22
Edelbrock Engine Camshaft and Lifter Kit
  • CAM KIT S/B CHEV-350
  • ; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int./Exh 204/214Deg.; Lift at Valve Int/Exh. 0.420./0.442in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 14 inch~ 50 State Legal~ Produces 320 hp/382 ft.-lbs. When Matched w/2701 Intake and 60909 Heads
  • Performer-Plus Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Small Block (262-400)
    • Exh. Duration @ .050 in. (Deg): 214
    • Exh. Duration Advertised (Deg): 288
    • Exhaust Valve Lift: 0.442 In.
    • Intake Duration @ 0.050 in.: 204 Degree
    • Intake Duration Advertised: 278
    • Intake Valve Lift: 0.420 In.
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 0-6750
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. These popular Performer-Plus camshafts for Small-Block Chevy are 50-state street legal.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 6.6L 400 -
Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 7.4L Edelbrock - Performer-Plus Camshaft Kit

P311-53549FF    2162  New

Qty:
$240.60
Edelbrock Engine Camshaft and Lifter Kit
  • CAM KIT BB CHEV
  • ; Off-Idle to 5500rpm; Adv. Dur. at 0.050 Int/Exh 218/228 Deg.; Lift at Valve Int/Exh 0.500 in.; Lobe Seps 114 Deg.; Intake Center Line 109 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 15 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 470 ft.-lbs When Matched w/2161 Intake And Stock Heads
  • Performer-Plus Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Big Block (396-502)
    • Exh. Duration @ .050 in. (Deg): 228
    • Exh. Duration Advertised (Deg): 302
    • Intake Duration @ 0.050 in.: 218 Degree
    • Intake Duration Advertised: 292
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 0-6750
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. These popular Performer-Plus camshafts for Small-Block Chevy are 50-state street legal.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 7.4L 454 -
Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 6.6L Edelbrock - Performer RPM Camshaft Kit

P311-25B6427    7102  New

Qty:
$289.10
Edelbrock Engine Camshaft and Lifter Kit
  • SBC RPM CAM KIT
  • ; Hyd; 1500-6500rpm; Adv Dur. at 0.050 Int.Exh/ 234/244 Deg.; Lift at Valve Int/Exh. 0.488/0.510 in.; Lob Seps 112 Deg. Intake Center Line 107 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads
  • Performer RPM Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Small Block (262-400)
    • Exh. Duration @ .050 in. (Deg): 244
    • Exh. Duration Advertised (Deg): 318
    • Exhaust Valve Lift: 0.510 In.
    • Intake Duration @ 0.050 in.: 234 Degree
    • Intake Duration Advertised: 308
    • Intake Valve Lift: 0.488 In.
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 1000-7000
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 6.6L 400 -
Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 7.4L Edelbrock - Performer RPM Camshaft Kit

P311-55F0725    7162  New

Qty:
$314.77
Edelbrock Engine Camshaft and Lifter Kit
  • CAM 7161/7163
  • ; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 240/240 Deg.; Lift at Valve Int/Exh .0560/0.573 in.; Lobe Seps 112 Deg.; Intake Center Line 110 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 10 inch~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 540hp and 530 ft.-lbs. When Matched w/7163 Intake and 60559 Heads
  • Performer RPM Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Big Block (396-502)
    • Exh. Duration @ .050 in. (Deg): 246
    • Exh. Duration Advertised (Deg): 306
    • Exhaust Valve Lift: 0.573 In.
    • Intake Duration @ 0.050 in.: 240 Degree
    • Intake Duration Advertised: 300
    • Intake Valve Lift: 0.560 In.
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 1000-7000
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 7.4L 454 -
Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 7.4L Edelbrock - Performer RPM Camshaft Kit

P311-55F0725    7162  New

Qty:
$314.77
Edelbrock Engine Camshaft and Lifter Kit
  • CAM 7161/7163
  • ; Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 240/240 Deg.; Lift at Valve Int/Exh .0560/0.573 in.; Lobe Seps 112 Deg.; Intake Center Line 110 Deg.;Legal For Use On Pre-Pollution Controlled Vehicles Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 10 inch~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 540hp and 530 ft.-lbs. When Matched w/7163 Intake and 60559 Heads
  • Performer RPM Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Big Block (396-502)
    • Exh. Duration @ .050 in. (Deg): 246
    • Exh. Duration Advertised (Deg): 306
    • Exhaust Valve Lift: 0.573 In.
    • Intake Duration @ 0.050 in.: 240 Degree
    • Intake Duration Advertised: 300
    • Intake Valve Lift: 0.560 In.
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 1000-7000
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for street high-performance applications, Performer RPM cams provide power from 1500 to 6500 rpm. These hydraulic lifter camshafts are dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. In the manifold section you'll find horsepower graphs showing the power levels obtainable when the Performer RPM package is used with the right combination of Edelbrock components. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 7.4L 454 -
Edelbrock
1977 Chevrolet K30 Engine Camshaft and Lifter Kit 8 Cyl 6.6L Edelbrock - Performer-Plus Camshaft Kit

P311-0836287    2103  New

Qty:
$253.82
Edelbrock Engine Camshaft and Lifter Kit
  • CAM KIT S/B CHEV-400
  • ; Off Idle to 5500rpm; Adv. Dur. at 0.50 Int/Exh 214/214 Deg.; Lift at Valve Int/Exh 0.442 in.; Lobe Spec 112 Deg.; Intake Center Line 107 Deg.;CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 15 inch~ 50 State Legal~ Produces 395 ft.-lbs. When Matched w/2101 Intake and Stock Heads
  • Performer-Plus Camshaft Kit
  • Product Attributes:
    • Engine Make/Size: Chevy Small Block (262-400)
    • Exh. Duration @ .050 in. (Deg): 214
    • Exh. Duration Advertised (Deg): 288
    • Exhaust Valve Lift: 0.442 In.
    • Intake Duration @ 0.050 in.: 214 Degree
    • Intake Duration Advertised: 288
    • Intake Valve Lift: 0.442 In.
    • Lifter Type: Hydraulic Flat Tappet
    • RPM Range: 0-6750
    • Usage: Street/performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chrome; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed for optimum torque from the low-end to the mid-range, Performer-Plus camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. These popular Performer-Plus camshafts for Small-Block Chevy are 50-state street legal.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 6.6L 400 -

Showing 1 - 6 of 6 Products for Engine Camshaft and Lifter Kit.