802.589.0911 Live Chat With Us

Finish Selecting Your Vehicle

Choose your Engine for your 1977 Chevrolet K30

  • 8 Cyl 5.7L
  • 8 Cyl 6.6L
  • 8 Cyl 7.4L

Shop By Brand

The Following brands are available based on your search.

  • Edelbrock
    Edelbrock
  • Uremco
    Uremco

Showing Products For 1977 Chevrolet K30 Carburetor

Below are all the different brands and applications for 1977 Chevrolet K30 Carburetor

Showing 1 - 10 of 22 Products for Carburetor.

Refine Your Search

Uremco
1977 Chevrolet K30 Carburetor 8 Cyl 6.6L Uremco

P311-146A0FF    3-3512  New

Qty:
$75.00 $260.53
Uremco Carburetor
  • ; Carb 4MV
Brand: Uremco
Additional Fitment Information:
Vehicle Transmission Fuel Delivery SubType Fuel System Block Engine CID CC
1977 - Chevrolet K30 Automatic 4BBL Rochester V 8 Cyl 6.6L 400 -
Uremco
1977 Chevrolet K30 Carburetor 8 Cyl 7.4L Uremco

P311-17ED304    3-3521  New

Qty:
$50.00 $266.73
Uremco Carburetor
  • ; Heavy Duty
Brand: Uremco
Additional Fitment Information:
Vehicle Fuel Delivery SubType Fuel System Block Engine CID CC
1977 - Chevrolet K30 4BBL Rochester V 8 Cyl 7.4L 454 -
Uremco
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Uremco

P311-146A0FF    3-3512  New

Qty:
$75.00 $260.53
Uremco Carburetor
Brand: Uremco
Additional Fitment Information:
Vehicle Fuel Delivery SubType Fuel System Block Engine CID CC
1977 - Chevrolet K30 4BBL Rochester V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - Performer Series Carburetor

P311-5373A7C    9906  New

Qty:
$411.46
Edelbrock Carburetor
  • CARB RECON PERF 600 CFM ELECTRIC SATIN
  • ; 4 bbl; 600 cfm; Reman; Square Flange 4150; Electric Choke; Single Fuel Inlet; Mech. Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~ Calibrated For Fuel Economy~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 600
    • Choke: Electric
    • Emission: Without Egr
    • Finish: Satin
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The Edelbrock 9906 Remanufactured Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9906 Remanufactured Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY) Designed for small-block and small displacement big-block engines, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring - yellow (4 Hg). Use carb Studs #8008 or #8024 if needed.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - Performer Series Carburetor

P311-0D6323C    9913  New

Qty:
$425.99
Edelbrock Carburetor
  • CARB RECON PERF 750 CFM ELECTRIC SATIN
  • ; 4 bbl; 750cfm; Reman; Square Flange 4150; Electric Choke; Single Fuel Inlet; Gas; Mech. Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~ Calibrated For Fuel Economy~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 750
    • Choke: Electric
    • Emission: Without Egr
    • Finish: Satin
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The Edelbrock 9913 Remanufactured Performer Series 750 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 9913 Remanufactured Performer Series 750 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY WITH PERFORMANCE) Designed for 402 c.i.d. and larger engines with Edelbrock Performer manifolds or other brands of similar design, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Calibrated 2% leaner than #1407. Provides excellent fuel economy when used on 454 c.i.d. Chevy and 460 c.i.d. Ford with Performer manifold. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .110, Secondary .107; Metering Rods - .075 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - Performer Series Carburetor

P311-2AFC619    9905  New

Qty:
$390.25
Edelbrock Carburetor
  • CARB RECON PERF 600 CFM MANUAL SATIN
  • ; 4 bbl; 600cfm; Reman; Square Flange 4150; Manual Choke; Single Fuel Inlet; Gas; Mech. Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~ Calibrated For Fuel Economy~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 600
    • Choke: Manual
    • Emission: Without Egr
    • Finish: Satin
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • Designed and calibrated for optimum street performance in small-block and some big-block engines. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, Performer RPM, RPM Air-Gap, Torker II and other brands of similar design.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - AVS2 Series(TM) Carburetor

P311-0426443    1905  New

Qty:
$422.22
Edelbrock Carburetor
  • AVS2 650 CFM Carburetor with Manual Choke in Satin (non-EGR)
  • ; 650 cfm; Square Flange; Non-EGR; Manual Choke; Satin For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • AVS2 Series(TM) Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 650
    • Choke: Manual
    • Emission: Without Egr
    • Finish: Cast
    • Flange: Square Bore
    • Type: Street
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Lead; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The AVS2 Series is the next generation in Edelbrock carburetors. The AVS2 features annular flow primary boosters with a new calibration for improved off idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular booster features eight, equally spaced orifices to improve fuel metering from idle to the main. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual- or single-plane intake manifolds. The AVS2 includes both timed and full vacuum ports for ignition advance. It comes with: Metering Jets - Primary .101, Secondary .098; Metering Rods - .070 x .037; Step-Up Spring - orange (5" Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 7.4L Edelbrock - Performer Series Carburetor

P311-41D0BC0    1407  New

Qty:
$458.35
Edelbrock Carburetor
  • CARB PERF 750 CFM MANUAL SATIN
  • ; 4 bbl; 750cfm; Square Flange 4150; Manual Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~ Electric Choke PN1478 Can Be Added If Needed~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 750
    • Choke: Manual
    • Emission: Without Egr
    • Finish: Ball Burnished
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The Edelbrock 1407 Performer Series 750 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1407 Performer Series 750 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR PERFORMANCE) Designed and calibrated for optimum street performance in small-block and big-block engines with Performer RPM, RPM Air-Gap and Torker II manifolds and with Performer manifolds on large cubic-inch engines. Includes both timed and full vacuum ports for ignition advance. Electric choke #1478 can be added if needed. Comes with: Metering Jets - Primary .113, Secondary .107; Metering Rods - .071 x .047; Step-Up Spring - orange (5 Hg). Use Carb Studs #8008 or #8024 if needed.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 7.4L 454 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - Performer Series Carburetor

P311-445BAE5    14063  New

Qty:
$510.00
Edelbrock Carburetor
  • CARB PERF 600 CFM ELECTRIC BLACK
  • ; New; 4 bbl.; 600cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Black Powdercoat; Non-EGR Compatible~ Calibrated For Fuel Economy~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not For Computer Controlled Vehicles~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 600
    • Choke: Electrical
    • Emission: Without Egr
    • Finish: Anodized
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The Edelbrock 14063 Performer Series 600 CFM electric choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 14063 Performer Series 600 CFM electric choke black powder coated carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY) Designed for small-block and small displacement big-block engines, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring - yellow (4 Hg). Use carb Studs #8008 or #8024 if needed.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -
Edelbrock
1977 Chevrolet K30 Carburetor 8 Cyl 5.7L Edelbrock - Performer Series Carburetor

P311-124F2A2    1406  New

Qty:
$471.55
Edelbrock Carburetor
  • CARB PERF 600 CFM ELECTRIC SATIN
  • ; 4 bbl.; 600cfm; Square Flange 4150; Electric Choke; Single Fuel Inlet Capability; Gasoline; Mechanical Secondary w/Velocity Air Valve Universal Throttle Linkage Type; Satin Finish; Non-EGR Compatible~ Calibrated For Fuel Economy~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Not Calibrated Or Compatible w/Alcohol/Race Or E-85 Pump Fuel~ New Fuel Filter Between Fuel Pump And Carb Is Required~ Adpt. PN2696 Or Kit PN2697 Is Required~ Proper Installation Is The Responsibility Of Installer; May Void Warranty~ Adpt. PN2732 Must Be Used When Installing On Certain Intakes~ Will Work w/Ford Auto OD Transmission (AOD) When Used w/Lokar Bracket SRK-4000
  • Performer Series Carburetor
  • Product Attributes:
    • Barrel: Four
    • CFM: 600
    • Choke: Electrical
    • Emission: Without Egr
    • Finish: Ball Burnished
    • Flange: Square Bore
    • Type: Automotive
    • Usage: Street/hi-performance
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Zinc; Which Is Known To The State Of California To Cause Cancer Or Birth Defects Or Other Reproductive Harm. For More Information; Visit Www.p65warnings.ca.gov.
  • The Edelbrock 1406 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1406 Performer Series 600 CFM electric choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor thats reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation. (CALIBRATED FOR FUEL ECONOMY) Designed for small-block and small displacement big-block engines, these carbs are recommended only for stock to Performer level applications. They are not recommended for use on RPM or Torker II intake manifolds. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Calibrated 2% leaner than #1405. Includes both timed and full vacuum ports for ignition advance. Comes with: Metering Jets - Primary .098, Secondary .095; Metering Rods - .075 x .047; Step-Up Spring - yellow (4 Hg). Use carb Studs #8008 or #8024 if needed.
Brand: Edelbrock
Additional Fitment Information:
Vehicle Block Engine CID CC
1977 - Chevrolet K30 V 8 Cyl 5.7L 350 -

Showing 1 - 10 of 22 Products for Carburetor.